M5STACK NanoH2 Tiny IoT Development Board User Guide

M5STACK NanoH2 Tiny IoT Development Board

SPECIFIKACIJE

ORIS

M5NanoH2 is a miniature, low-power IoT development board within the M5Stack development kit series. Powered by the ESP32-H2 MCU, it boasts advanced wireless communication support Zigbee, facilitating seamless control of infrared IoT devices through its built-in infrared transmitter. The onboard ceramic antenna ensures a stable wireless communication connection. Additionally, the device features programmable RGB LEDs, adding a personalized visual touch to projects. The inclusion of Grove interfaces allows M5NanoH2 to flexibly expand with various M5 devices, supporting the connection of different device types through protocols such as UART and I2C. This provides developers with abundant hardware expansion possibilities. Suitable for applications in smart homes, industrial automation, health monitoring, and IoT devices, M5NanoH2 delivers a comprehensive development solution for innovative projects.

ESP32-H2 

1. Komunikacijske zmogljivosti:
   • Bluetooth® 5 (LE): Incorporates Bluetooth 5.0 technology for extended wireless coverage and faster data transmission.
   • Zigbee and Thread (802.15.4): Supports Zigbee and Thread communication protocols, offering flexible connectivity for IoT applications.
2. Procesor in zmogljivost:
   • RISC-V 32-bit single-core processor: Delivers a highly flexible and scalable processor architecture.
   • Up to 160 MHz clock frequency: Ensures the device has fast and efficient data processing capabilities.
   • Industry-leading low-power and RF performance: Achieves a leading position in both power consumption and RF performance.
3. Pomnilnik:
   • Built-in 96 KB ROM: Used for storing firmware or program code. 320 KB SRAM: Utilized for runtime data storage.
   • 4 KB low-power SRAM: Specifically designed for low-power operations. Supports external Flash: Can extend the storage space for program code through an external memory.
4. Zatiči GPIO in programabilni vmesniki:
   • Supports SPI, UART, I2C, I2S, RMT, TWAI, and PWM: Multiple communication interfaces, enhancing flexibility for data exchange with other de

HITRI ZAČETEK

ARDUINO IDE 

Za dostop do uradnega Arduino webspletno mesto (https://www.arduino.cc/en/Main/Software) and download the installation package for your operating system, follow these steps:

1. Odprite Arduino IDE in se pomaknite do File -> Nastavitve -> Nastavitve.
2. Kopirajte naslednji upravitelj plošč M5Stack URL in ga prilepite v »Additional Boards Manager URLs”: https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json
3.  Go to: Tools -> Board: -> Boards Manager…
4. Iskanje M5Stack, ga poiščite in kliknite »Namesti«.
5. Izberite Orodja -> Plošča: -> M5Stack Arduino
6. Select M5NanoH2

SERIJSKA BLUETOOTH 

• Odprite Arduino IDE in naložite example program: File -> npramples -> BluetoothSerial -> SerialToSerialBT.
• Povežite napravo z računalnikom.
• Izberite ustrezna vrata za nalaganje. Ko bo končano, bo naprava samodejno omogočila Bluetooth.
• The device name is set to ESP32test. Now, use a Bluetooth serial communication tool on your PC to achieve transparent transmission of Bluetooth serial data.

Namestitev Arduino

User manual, how to use zigbee function

Zigbee OnOff Light(End Device)

Arduino IDE Tools：

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ED (end device)
• Tools -> Partition Scheme: custom

Zigbee On Off Switch(Coordinator)

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
•  Tools -> Flash Size: 2MB
• Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
• Zigbee ZCZR 2MB with spiffs

Koraki uporabe 

1. Ensure that the coordinator is running and creating a network, burn the On Off Light code to the terminal node device.
2. After the device is started, it will automatically search and join the network, and On Off Switch will send light switching instructions at regular intervals.

Zigbee Scan Omrežje

Arduino IDE Tools

• Tools -> Board: ESP32H2 Dev Module
•  Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
•  Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)
• Tools -> Partition Scheme: custom
•  Zigbee ZCZR 2MB with spiffs

Koraki uporabe

After the device is started, it automatically starts scanning. If there is an active Zigbee network in the surrounding area, the current display result will be scanned after each scan is completed, and the next round of scanning will be automatically started.

Odpri nit

Arduino IDE Tools

•  Tools -> Board: ESP32H2 Dev Module
• Tools -> Erase All Flash Before Sketch Upload: Enable
• Tools -> Flash Size: 2MB
• Tools -> Partition Scheme: Minimal SPIFFS (1.3MB APP/700K SPIFFS)

Opozorilo FCC

Opozorilo FCC:
Vse spremembe ali modifikacije, ki jih ni izrecno odobrila stranka, odgovorna za skladnost, lahko razveljavijo uporabnikovo pooblastilo za uporabo opreme.
Ta naprava je skladna s 15. delom pravil FCC. Delovanje je odvisno od naslednjih dveh pogojev:

1. Ta naprava morda ne povzroča škodljivih motenj in
2. Ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje.

POMEMBNA OPOMBA:

Opomba: Ta oprema je bila testirana in ugotovljeno je bilo, da je v skladu z omejitvami za digitalne naprave razreda B v skladu s 15. delom pravil FCC. Te omejitve so zasnovane tako, da zagotavljajo primerno zaščito pred škodljivimi motnjami v stanovanjski namestitvi. Ta oprema ustvarja, uporablja in lahko oddaja radiofrekvenčno energijo in lahko povzroči škodljive motnje radijskih komunikacij, če ni nameščena in uporabljena v skladu z navodili. Vendar ni nobenega zagotovila, da do motenj ne bo prišlo pri določeni namestitvi. Če ta oprema povzroča škodljive motnje pri radijskem ali televizijskem sprejemu, kar je mogoče ugotoviti z izklopom in vklopom opreme, uporabnika spodbujamo, da poskusi odpraviti motnje z enim ali več od naslednjih ukrepov:

• Preusmerite ali premaknite sprejemno anteno.
• Povečajte razdaljo med opremo in sprejemnikom.
• Priključite opremo v vtičnico na drugem tokokrogu kot tisti, na katerega je priključen sprejemnik.
• Za pomoč se posvetujte s prodajalcem ali izkušenim radijskim/TV tehnikom.

Izjava FCC o izpostavljenosti sevanju: Ta oprema je v skladu z omejitvami FCC za izpostavljenost sevanju, ki so določene za nenadzorovano okolje. To opremo je treba namestiti in uporabljati z najmanjšo razdaljo 20 cm med radiatorjem in vašim telesom.

Frekvenčno območje:

• BLE 1M/2M: 2402-2480MHz
• ZigBee: 2405-2480MHz
• Maximum ElRP for CE:
• BLE: 1.32 dBm
• ZigBee: 1.4 dBm
• Proizvajalec : M5Stack Technology Co., Ltd
• Blok A10, južna obala Expo Baya, ulica Fuhai, okrožje Bao'an, Shenzhen, Kitajska

pogosta vprašanja

• Q: What is the main processor of the M5STACK NanoH2?
  A: It uses an ESP32-H2FH4S with a RISC-V 32-bit single-core processor, running at up to 160 MHz.
• Q: What communication protocols does it support?
  A: It supports Zigbee, Thread (802.15.4), SPI, UART, I2C, I2S, RMT, TWAI, and PWM.
• Q: How much memory does the NanoH2 have?
  A: It has 96 KB ROM, 320 KB SRAM, and 4 KB low-power SRAM, with support for external Flash.
• Q: Can I use the M5STACK NanoH2 as a Zigbee coordinator and an end device?
  A: Yes, the device can be configured as both a Zigbee End Device (ED) or a Coordinator/Router (ZCZR) through the Arduino IDE settings.
• Q: What is the frequency range for wireless communication?
  A: The frequency range for BLE 1M/2M is 2402-2480MHz, and for ZigBee it is 2405-2480MHz.