TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Specifikacije

• Model: Q103
• Združljivost: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Povezljivost: Bluetooth, 2.4G Wireless, USB (Type-C)
• Delovni letniktage: DC 3.7V
• Delovni tok: < 30 mA
• Spalni tok: < 5uA
• Polnjenje Voltage/Trenutno: DC 5V/500mA

Odpravljanje težav

• Krmilnik se ne povezuje:
  • Prepričajte se, da je krmilnik popolnoma napolnjen.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Prepričajte se, da je Bluetooth v vaši napravi omogočen.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Gumbi se ne odzivajo:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Preizkusite krmilnik v drugi igri ali aplikaciji.
• Vnosni zamik:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Zmanjšajte motnje zaradi drugih brezžičnih naprav.
  • Try connecting via USB cable if available.
• Krmilnik se ne polni:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Poskusite z drugim kablom tipa C ali napajalnikom.
  • The LED indicator should show the charging status.

Q103 Funkcionalni diagram

1. Gumb D-pad
2. Gumb X/Y/A/B
3. HOME Reconnect/Power Button
4. Gumb PAIR
5. Gumb IZBERI
6. Gumb TURBO
7. Leva igralna palica/gumb L3
8. Desna igralna palica/gumb R3
9. Gumb CLEAR
10. Gumb START
11. L gumb
12. Gumb L2
13. Vrata za polnjenje tipa C
14. R2 gumb
15. R Gumb
16. Ponastavi luknjo
17. LED
18. Stikalo za način

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 in novejši

Bluetooth povezava

1. Obrnite stikalo: preklopite na X za vstop v način X-INPUT.
2. Prva uporaba (združevanje ob vklopu):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • LED lučka vedno sveti rdeče, ko je ponovna povezava uspešna.
3. Ponovna uporaba (ponovna povezava):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. LED lučka vedno sveti rdeče, ko je ponovna povezava uspešna.
4. Press the PAIR button to power off the device.

Preklopni način

Bluetooth povezava

1. Obrnite stikalo: preklopite na S za vstop v način preklopa.
2. Prva uporaba (združevanje ob vklopu):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   LED lučka vedno sveti zeleno, ko je ponovna povezava uspešna.
3. Ponovna uporaba (ponovna povezava):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus za Android

Android 9.0 in novejši

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Prva uporaba (združevanje ob vklopu):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Ponovna uporaba (ponovna povezava):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Pritisnite gumb Seznani, da izklopite napravo.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Nadgradnja vdelane programske opreme

1. Povežite V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Nastavitve igralne palice

• Kalibracija rockerja
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Električni parametri

• Delovna zvtage: DC3.7V
• Delovni tok: <30mA
• Tok mirovanja: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Čas pripravljenosti: 30 dni (popolnoma napolnjen)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Funkcija spanja / bujenja:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Opozorilo FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Preusmerite ali premaknite sprejemno anteno.
• Povečajte razdaljo med opremo in sprejemnikom.
• Priključite opremo v vtičnico na drugem tokokrogu kot tisti, na katerega je priključen sprejemnik.
• Za pomoč se posvetujte s prodajalcem ali izkušenim radijskim/TV tehnikom.

Pozor: Kakršne koli spremembe ali modifikacije te naprave, ki jih proizvajalec izrecno ne odobri, lahko razveljavijo vašo pravico do uporabe te opreme.
Ta naprava je skladna s 15. delom pravil FCC. Delovanje je odvisno od naslednjih dveh pogojev:

1. Ta naprava morda ne povzroča škodljivih motenj in
2. Ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje.

Ta oprema je v skladu z omejitvami FCC za izpostavljenost sevanju, ki so določene za nenadzorovano okolje. To opremo je treba namestiti in uporabljati z najmanjšo razdaljo 0 cm med radiatorjem in vašim telesom.