Solutions MS-TP Programmable Touch Panel
Obvestilo o avtorskih pravicah
Vse vsebine tega priročnika, katerega avtorske pravice pripadajo našemu podjetju, ni dovoljeno klonirati, kopirati ali prevajati brez dovoljenja podjetja.
Specifikacije izdelka in informacije, ki so navedene v tem dokumentu, so samo za referenco. Katero koli vsebino lahko spremenimo, izbrišemo ali posodobimo kadar koli in brez predhodnega obvestila.
Obvestilo FCC
Ta izdelek je skladen s 15. delom pravil FCC. Operacija je predmet naslednjih dveh pogojev:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Ta izdelek je bil preizkušen in ugotovljeno je, da ustreza omejitvam za digitalne naprave razreda A v skladu s 15. delom pravil FCC. Te omejitve so zasnovane tako, da zagotavljajo primerno zaščito pred škodljivimi motnjami v stanovanjski namestitvi. Ta oprema ustvarja in lahko oddaja radiofrekvenčno energijo ter lahko povzroči škodljive motnje radijskih komunikacij, če ni nameščena in uporabljena v skladu z navodili. Vendar ni nobenega zagotovila, da do motenj ne bo prišlo pri določeni namestitvi. Če ta oprema povzroča škodljive motnje pri radijskem ali televizijskem sprejemu, kar je mogoče ugotoviti z izklopom in vklopom opreme, uporabnika spodbujamo, da poskusi odpraviti motnje z enim ali več od naslednjih ukrepov:
- Preusmerite ali premaknite sprejemno anteno.
- Povečajte razdaljo med opremo in sprejemnikom.
- Priključite opremo v vtičnico na drugem tokokrogu kot tisti, na katerega je priključen sprejemnik.
- Za pomoč se posvetujte s prodajalcem ali izkušenim radijskim/televizijskim tehnikom.
Razred A ITE
ITE razreda A je kategorija vseh drugih ITE, ki izpolnjujejo omejitve ITE razreda A, ne pa tudi omejitev ITE razreda B. Prodaja takšne opreme ne bi smela biti omejena, vendar je treba v navodila za uporabo vključiti naslednje opozorilo:
Opozorilo
Delovanje te opreme v stanovanjskem okolju lahko povzroči radijske motnje.
EC Compliance Statement
(razred A)
S tem je potrjeno, da je ta izdelek skladen z zahtevami, določenimi v direktivah Sveta o približevanju zakonov držav članic v zvezi z Direktivo o elektromagnetni združljivosti 2014/30/EU.
Prenapetostna zaščita
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Previdnost
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Uvod
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Ključne značilnosti
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Skladen s standardnimi industrijskimi omrežnimi komunikacijskimi protokoli (TCP/IP, Http, UDP, Webvtičnica)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Vsebina paketa
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x stenski nosilec
- 2x Bracket Fixing Screw
- 1x uporabniški priročnik
Specifikacije
| Tehnični | |
| procesor: | ARM Cortex-A55 1.8 GHz |
| Operacijski sistem: | Android 11 |
| RAM: | 4 GB DDR4 RAM |
| Flash pomnilnik: | 32 GB EMMC bliskavice |
| Resolucija: | 720*720 |
| Vrsta dotika: | Zmogljiv zaslon na dotik |
| ESD zaščita: | IEC 61000-4-2: ±8kV (razelektritev v zračni reži) & ±4kV (kontaktna razelektritev) |
| Povezava | |
| RS232: | 1x 3-pinski Phoenix konektorji |
| LAN/POE: | 1x standardna 10M/100M/1000M Ethernet RJ45 vrata, ki podpirajo funkcijo POE |
| MOČ: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Mehanski | |
| Ohišje: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| barva: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimenzije: | 86 mm (D) x 86 mm (Š) x 44 mm (D) |
| Teža: | 192 g |
| Napajanje: | 24V DC/1A ali POE |
| Poraba energije: | 5W |
| Delovna temperatura: | 0°C ~ 40°C / 32°F ~ 104°F |
| Temperatura skladiščenja: | -4 °F ~ 140 °F / -20 °C ~ 60 °C |
| Delovna vlažnost: | 20% ~ 80% (relativna vlažnost, brez kondenzacije) |
| Vlažnost skladiščenja: | 10% ~ 90% (relativna vlažnost, brez kondenzacije) |
Nadzor delovanja in funkcije
| številka | Ime | Opis funkcije |
| 1 | Zaslon na dotik | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
Gumb RESET |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | gumb POWER | Uporablja se za izklop zaslona ali bujenje. |
| 4 | vrata USB | Vrata mikro USB. Rezervirana vrata za odpravljanje napak v sistemu. |
|
5 |
Vrata LAN/PoE |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | Vrata POWER | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
RS232 vrata |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Navodila za montažo
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
1. korak: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
2. korak: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
pogosta vprašanja
Q: Can I use this touch panel without surge protection?
A: While surge protection is highly recommended, the touch panel can function without it. However, using surge protection will extend the equipment's lifespan.
Q: What type of network connection is required for this product?
A: The product requires a direct network cable connection method. Do not cross-connect the network cables.
Dokumenti / Viri
 |
Solutions MS-TP Programmable Touch Panel [pdf] Uporabniški priročnik MS-TP Programmable Touch Panel, MS-TP, Programmable Touch Panel, Touch Panel, Panel |