SKYKING D4 Mini Printer

konecview
The MINI Printer is an easy-to-operate children’s digital printer with a unique shape and is designed to make imagination and learning fun. Please read the manual carefully, follow warnings and precautions, and keep it for future reference.
Lastnosti
- Prva uporaba: charge first, then unplug the charger before use
- Vklop: long-press the power key for 3 seconds to boot
- Zahteva za polnjenje: use a 5V charger to avoid damage
- Print depth control: adjustable in the app under the “Concentration” section (Light, Medium, Dark, or Customized)
- Skladnost s predpisi FCC: Class B digital device (Part 15), with operation subject to two conditions
Quick Setup & Use
- For first use, charge the printer, then unplug the charger before operating.
- Power on by long-pressing the power key for 3 seconds.
- Install the app “iBleem” (via Apple App Store or Google search) on your mobile phone.
- Enable Bluetooth and connect using the iBleem app: in the app’s “My Device” tab, connect to the Bluetooth printer.
- After successful connection, print a note from the app.
- To replace paper: remove the old paper roll and insert the new roll in the direction shown; ensure the paper is straight (not crooked). Expose about 2 cm of the thermosensitive paper into the paper bin opening so the machine can absorb paper automatically, then close the paper bin.
Kratek uvod
Welcome and thank you for choosing our products. In order to understand and use our products more quickly, it is recommended that you read this manual carefully before use and keep it properly for future reference. Warnings and precautions in the instruction manual should be complied with. If there is any reference error, we hope that users will understand that the design content will be changed without notice. This product is a unique shape, exquisite design, easy-to-operate children’s digital printer, designed for children’s digital products, so that children in use to learn more imagination and play, experience the fun of nature.
Specifikacija ključa/vmesnika

Prosimo, da napolnite prvič in pred uporabo izključite polnilnik
Uporabite čarovnika
- First use: please charge first, long-press the power key 3 seconds to boot.

- Apple Store or Google search: iBleem, installed APP to use.

- Ko je bluetooth omogočen, uporabite aplikacijo, ki ste jo prenesli iz mobilnega telefona, da se povežete s tiskalnikom Bluetooth v vrstici TAB v »Moji napravi«. Po uspešni povezavi lahko beležko natisnete.

Tečaj zamenjave papirja
- Odstranite star papirni zvitek in vstavite nov papirni zvitek v prikazani smeri. Papir naj bo postavljen naravnost in ne ukrivljen. Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shaped

- Pokrijte koš za papir, naprava lahko samodejno absorbira papir po običajni uporabi.

- Ko so zgornji koraki pravilni, lahko naprava tiska normalno.

Opozorilo o bateriji
- Prosimo, uporabite 5V polnilnik za polnjenje v skladu s specifikacijo, da preprečite poškodbe stroja.
- Razstavljanje, udarci, iztiskanje ali ogenj so prepovedani;
- Če pride do močnega izbočenja, ne nadaljujte z uporabo;
- Do not put in a high-temperature environment; battery after immersion is prohibited to use;
- Replacement with the wrong type of battery can be explosive; be sure to follow the instructions to dispose of used batteries.
Zadeve, ki zahtevajo pozornost
- Med polnjenjem nežno vstavite ali izvlecite polnilni kabel, da preprečite prekomerno poškodbo vrat;
- Po polnjenju pravočasno odklopite polnilno linijo;
- In order to avoid danger, do not use or charge in high-temperature, high-humidity, excessive smoke and dust environments, such as: bathroom, steam room, open fire, etc;
- Nepravilno polnjenje lahko povzroči poškodbe tiskalne glave;
- Ne dotikajte se tiskalne glave, da preprečite pregrevanje in opekline;
- The tear paper blade sharp; be careful not to touch.
The depth of the print can be controlled through the APP in the »Concentration« section as shown in the picture below. The concentration setting can be set to Light, Medium, Dark or Customized.

Opozorilo FCC
Ta naprava je skladna s 15. delom pravil FCC. Delovanje je odvisno od naslednjih dveh pogojev:
- Ta naprava morda ne povzroča škodljivih motenj in
- ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje. Vse spremembe ali modifikacije, ki jih ni izrecno odobrila stranka, odgovorna za skladnost, lahko razveljavijo uporabnikovo pooblastilo za uporabo opreme.
Opomba: Ta oprema je bila testirana in ugotovljeno je bilo, da je v skladu z omejitvami za digitalne naprave razreda B v skladu s 15. delom pravil FCC. Te omejitve so zasnovane tako, da zagotavljajo primerno zaščito pred škodljivimi motnjami v stanovanjski namestitvi. Ta oprema ustvarja, uporablja in lahko oddaja radiofrekvenčno energijo in lahko povzroči škodljive motnje radijskih komunikacij, če ni nameščena in uporabljena v skladu z navodili. Vendar pa ni nobenega zagotovila, da do motenj ne bo prišlo pri določeni namestitvi. Če ta oprema povzroča škodljive motnje pri radijskem ali televizijskem sprejemu, kar je mogoče ugotoviti z izklopom in vklopom opreme, uporabnika spodbujamo, da poskusi odpraviti motnje z enim ali več od naslednjih ukrepov:
- Preusmerite ali premaknite sprejemno anteno.
- Povečajte razdaljo med opremo in sprejemnikom.
- Priključite opremo v vtičnico na drugem tokokrogu kot tisti, na katerega je priključen sprejemnik.
- Za pomoč se posvetujte s prodajalcem ali izkušenim radijskim/TV tehnikom.
Ocenjeno je bilo, da naprava izpolnjuje splošne zahteve glede izpostavljenosti RF. Napravo je mogoče uporabljati v prenosnih pogojih izpostavljenosti brez omejitev.
Odpravljanje težav
- Printer will not boot: For first use, ensure it has been charged, then long-press the power key for 3 seconds to start.
- Cannot connect / print: Confirm Bluetooth is enabled and connect to the Bluetooth printer through the iBleem app under “My Device.”
- Paper not feeding or printing stops: Check that the new thermosensitive paper is inserted straight (not crooked) and that approximately 2 cm of paper is exposed into the paper bin opening before closing the bin.
- Print head issues / overheating concerns: Do not touch the print head; improper charging may lead to print head damage. Stop use if conditions suggest damage (e.g., severe bulging in the battery).
- Charging/port concern: Insert or pull out the charging line gently to prevent excessive force that could damage the charging port, and unplug after charging.
Dokumenti / Viri
![]() | Mini tiskalnik D4 |
Reference
- g.yintb.com/h5/Ibleemg.yintb.com
- Uporabniški priročnikmanual.tools

