QUARK-ELEC JS01, J1939 Engine Data Gateway
Informacije o izdelku
Specifikacije
- Model: JS01
- Type: J1939 Engine Data Gateway
- Protocol Conversion: J1939 to NMEA 2000
- Združljivost: naprave Android
- Power Source: NMEA 2000 network
Navodila za uporabo izdelka
Konfiguracija in nastavitev:
The JS01 is a plug-and-play device for connecting to an NMEA 2000 network. If you need to view engine data or configure multiple engines, you can use the JS01 Config App on an Android tablet or mobile device.
Nadgradnja vdelane programske opreme:
To benefit from new features and enhanced compatibility, periodically check for firmware updates on the Quark-elec webpage. Use the JS01 Config App for easy firmware upgrades.
KONECVIEW
To je konecview only. Please familiarize yourself with the manual and the manuals of any connecting devices before installation. It is always recommended that electronic equipment be installed by an experienced installer.
NAMESTITEV
- Montaža: Consider the location…
- Suha, stabilna lokacija.
- Prepričajte se, da imate potrebno dolžino kabla. Če vrtate luknje za svoje kable, po namestitvi zatesnite vse luknje, da preprečite vdor vode in poškodbe plovila ali opreme.
- Priključite napajanje
The JS01 is powered by the NMEA 2000 network. - NMEA 2000 is a plug-and-play communications standard, the JS01’s NMEA2000 input does not require additional setup before connecting it to an NMEA 2000 network. To protect the device, please don’t power up NMEA 2000 bus during the installation process.
- J1939: J1939 is a set of standards defined by the Society of Automotive Engineers (SAE). J1939 builds on the CAN bus by providing a higher-layer protocol that defines message formats, addressing, and error handling.
Different equipment may use various types of CAN bus connectors. The JS01 uses Deutsch DT04 -6P and DT06-6S connectors, which are known for their reliability and are widely used in marine inboard engines. These connectors were chosen to ensure secure, robust connections in demanding marine environments. If your engine uses a different connector type, an appropriate adapter will be required.
Priključka DT04-6P in DT06-6S sta povezana med priključki. Ta zasnova omogoča integracijo JS01 v obstoječi sistem vodila CAN brez motenj ali vpliva na trenutne povezave.
Enota JS01 se priključi prek treh žic:- Pin 1: CAN Nizko
- Zatič 3: CAN High
- Pin 4: Tla
Prosimo, dvakrat preverite ožičenje, da se prepričate, da ni napačnih povezav. JS01 se napaja iz vodila NMEA 2000, zato ni treba priključiti 12V.
| DT04-6P | DT06-6S | |
| Zatič 1 | LAHKO NIZKA | LAHKO NIZKA |
| Zatič 2 | N/A | N/A |
| Zatič 3 | LAHKO VISOK | LAHKO VISOK |
| Zatič 4 | TLA | TLA |
| Zatič 5 | N/A | N/A |
| Zatič 6 | N/A | N/A |
LED lučka:
The LED status indicator will display a solid light when the device is powered on. It will flash to
CONVERSION LISTS
J1939 TO NMEA 2000 CONVERSION LISTS
- The JS01 operates in a read-only mode on the J1939 interface, ensuring it does not interfere with existing engine control or status systems. It only reads data from the J1939 network and transmits it to the NMEA 2000 bus. This design guarantees there are no security or safety risks to the existing J1939 system.
- The following table lists the supported NMEA 2000 PGN’s and the related J1939 SPN/PGNs.
| Vir:
J1939 SPN/PGN |
Opis | Converted:
NMEA2000 PGN |
| 92/61443(EGS2) | Odstotek obremenitve motorja pri trenutni hitrosti | 127489 |
| 190/61444(EGS1) | Hitrost motorja | 127488 |
| 513/61444(EGS1) | Dejanski odstotek navora motorja | 127489 |
| 523/61445(ETC2) | Trenutna prestava menjalnika | 127493 |
| 247/65253 (URA) | Skupno število ur delovanja motorja | 127489 |
| 110/65262(ET1) | Temperatura hladilne tekočine motorja | 127489 |
| 175/65262(ET1) | Temperatura motornega olja | 127489 |
| 109/65263(ET1) | Tlak hladilne tekočine motorja | 127489 |
| 100/65263(EFL_P1) | Tlak motornega olja | 127489 |
| 94/65263(EFL_P1) | Tlak dovoda goriva motorja | 127489/130314 |
| 183/65266(LFE) | Stopnja goriva v motorju | 127489 |
| 184/65266(LFE) | Trenutna poraba goriva motorja | 127497 |
| 173/65270(IC1) | Temperatura izpušnih plinov motorja | 130316 |
| 102/65270(IC1) | Tlak polnjenja turbopolnilnika motorja | 127488 |
| 115/65271(VEP1) | Tok alternatorja (baterije) | 127508 |
| 167/65271(VEP1) | Potencial alternatorja (zvtage) | 127489 |
| 168/65271(VEP1) | Napetost baterije (Voltage) | 127508 |
| 127/65272(TRF1) | Tlak olja v menjalniku | 127493 |
| 177/65272(TRF1) | Temperatura olja v menjalniku | 127493 |
| 96/65276(DD) | Raven goriva | 127505 |
APP
- JS01 je naprava »plug-and-play«, ki pred povezavo z omrežjem NMEA 2000 ne potrebuje začetne konfiguracije. Če pa želite view Če želite spremeniti podatke o motorju ali prilagoditi številko primerka za podporo več motorjev, boste morali uporabiti aplikacijo JS01 Config na tabličnem računalniku ali mobilni napravi Android. Orodje za konfiguracijo vam omogoča tudi filtriranje sporočil o napakah in opozorilih motorja, ki se prenašajo v omrežje NMEA 2000.
- The latest App can be download from Quark-elec webpage page: https://www.quark-elec.com/downloads/configuration-tools/
NADGRADITE Firmware
- Quark-elec periodically release firmware updates to introduce new features and enhance compatibility with a wider range of engine types. The JS01 Config App can also be used to easily upgrade the device firmware. The latest firmware can be download from Quark-elec webstran: https://www.quark-elec.com/downloads/firmware/
- Full documentation on how to update the firmware can be found in the JS01 manual: https://www.quark-elec.com/doc/JS01_manual.pdf
Zavrnitev odgovornosti: Ta izdelek je zasnovan za pomoč pri navigaciji in ga je treba uporabiti za izboljšanje običajnih navigacijskih postopkov in praks. Uporabnik je odgovoren za preudarno uporabo tega izdelka. Niti Quark-elec niti njihovi distributerji ali trgovci ne prevzemajo odgovornosti ali odgovornosti niti do uporabnika izdelka ali njegovega premoženja za kakršno koli nesrečo, izgubo, poškodbo ali kakršno koli škodo, ki bi nastala zaradi uporabe ali odgovornosti za uporabo tega izdelka.
Skenirajte tukaj za uporabniški priročnik za to napravo.
- Prosimo, reciklirajte svojo embalažo
- Vsi izdelki imajo CE, RoHS certifikat
- Več informacij na www.quark-elec.com
Pogosto zastavljena vprašanja
Can the JS01 be used with multiple engines?
Yes, the JS01 supports multiple engines, and you can adjust the instance number using the JS01 Config App.
How can I update the firmware of the JS01?
Firmware updates can be easily done using the JS01 Config App. Check the Quark-elec webpage for the latest firmware download.
Is it necessary to connect a 12V power source to the JS01?
No, the JS01 draws power from the NMEA 2000 bus, so there is no need to connect a separate 12V power source.
Dokumenti / Viri
 |
QUARK-ELEC JS01, J1939 Engine Data Gateway [pdf] Uporabniški priročnik JS01, JS01 J1939 Engine Data Gateway, JS01 J1939, Engine Data Gateway, Data Gateway, Gateway |