LTECH KMS1 Switch Module
Predstavitev izdelka
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Tehnične specifikacije
| Model | KMS1 |
|---|---|
| Brezžični tip | Zadeva čez nit |
| Preklopi kanal | 1CH |
| Delovna zvezatage | 100-240V~, 50/60Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Prenapetostni tok releja | 70A@10ms |
| Delovna temperatura | -25°C~50°C |
| Velikost izdelka | D45׊45.5×V20.5 (mm) |
| Teža izdelka | 38 g |
| Standardi | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Slike izdelkov
DIMENZIJA
- Enota: mm
- Dimenzije: 45 x 45.5 x 20.5
Shema ožičenja
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
Uporabite APLIKACIJO NFC Lighting
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Uredi parametre
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Združljivi modeli
Nastavitev Example
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Dodajte dodatke
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Nadzorna naprava
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Napredne funkcije
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Obnovi tovarniške nastavitve
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Ponastavitev ob vklopu
V primeru izpada električne energijetage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Pozor
- Namestitev in zagon izdelka mora opraviti usposobljen strokovnjak.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- Dobro odvajanje toplote bo podaljšalo življenjsko dobo izdelkov. Poskrbite za dobro prezračevanje.
- Prosimo, preverite, ali je delovni voltagUporabljeno je v skladu z zahtevami parametrov izdelkov.
- Premer uporabljene žice mora biti sposoben obremeniti svetilke, ki jih priključite, in zagotoviti trdno ožičenje.
- Preden vklopite izdelke, se prepričajte, da so vse napeljave pravilne v primeru napačne povezave, ki povzroči poškodbe svetil.
- Če pride do napake, ne poskušajte sami popraviti izdelkov. Če imate kakršna koli vprašanja, se obrnite na svoje dobavitelje.
Garancijska pogodba
Garancijski roki od dneva dobave: 2 let. V garancijskih obdobjih so zagotovljene brezplačne storitve popravila ali zamenjave za težave s kakovostjo.
Izjeme iz garancije
- Izven garancijskih rokov.
- Vsaka umetna poškodba, ki jo povzroči visoka voltage, preobremenitev ali nepravilno delovanje.
- Izdelki s hudimi fizičnimi poškodbami.
- Škoda zaradi naravnih nesreč in višje sile.
- Garancijske nalepke in črtne kode so poškodovane.
- No contract signed by our company.
Dokumenti / Viri
 |
LTECH KMS1 Switch Module [pdf] Priročnik za lastnika KMS1 Switch Module, KMS1, Switch Module, Module |