ltech DR4 LED Controller User Manual

ltech DR4 LED Controller

Tehnične specifikacije

konecview

The DALI Relay Module with Zero-Cross Detection effectively suppresses instantaneous surge current when the relay pulls in. It complies with DALI-2 standard, in accordance with IEC62386-101, IEC62386-102, and IEC62386-208 standard protocols. It can independently control four relays or contactors and is compatible with mainstream DALI standard protocols and master control devices, enabling non-dimmable luminaires to access the DALI lighting system. DALI addresses can be set independently, and grouping and scene control can be realized via the DALI master controller. It supports setting of DALI first address, power-on status, system failure status, and DALI scenes via the NFC Lighting APP. Each channel supports a maximum current of 12A, with a built-in independent fuse for safe operation. It features a wide voltage power supply: 100-240V~ and is DIN rail mountable, compatible with standard 35mm DIN rail.

Dimenzijska risba

Opis terminala

Način namestitve

Rail mounting (rail specifications: TS-35/7.5 or TS-35/15)

Diagram povezave

Uporabite APLIKACIJO NFC Lighting
Scan the QR code below with your mobile phone and follow the prompts to complete the APP installation (According to performance requirements, you need to use a NFC-capable Android phone, or an iphone 8 and later that are compatible with iOS 13 or higher)

Before you begin setting the parameters of the driver, please make sure the driver is powered o .

Branje/zapis gonilnika LED
S telefonom, ki podpira NFC, preberite podatke gonilnika LED, nato uredite parametre in jih lahko neposredno zapišete v gonilnik.

Preberite gonilnik LED
On the APP home page, click 【Read/Write LED driver】, then keep the phone’s sensing area close to the NFC sensing area of the driver to read the driver parameters.

Uredite parametre
Tap [Parameter Management] to edit and set more advanced parameters such as DALI First Address, DALI Advanced Template, Power-on Status, System Failure Status, etc

Pišite vozniku
After completing the parameter settings, click [Write] in the upper right corner, and keep the phone’s sensing area close to the NFC sensing area of the driver, so the parameters can be written to the driver.

Pozornosti

• Namestitev in zagon izdelka mora opraviti usposobljen strokovnjak.
• LTECH products are not lightning proof and not waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
• Dobro odvajanje toplote bo podaljšalo življenjsko dobo izdelkov. Poskrbite za dobro prezračevanje.
• During installation, keep away from large metal objects and avoid stacking multiple units to prevent signal interference that may affect normal operation.
• Avoid installing in thunderstorm-prone areas, strong magnetic fields, and high-voltage območja.
• Prosimo, preverite, ali je delovni voltagUporabljeno je v skladu z zahtevami parametrov izdelkov.
• The diameter of wire used must be able to load the light fixtures you connect and ensure firm wiring.
• Preden vklopite izdelke, se prepričajte, da so vse napeljave pravilne v primeru napačne povezave, ki povzroči poškodbe svetil.
• Če pride do napake, izdelkov ne poskušajte popraviti sami. Če imate kakršna koli vprašanja, se obrnite na svoje dobavitelje.
• Ta priročnik se lahko spremeni brez nadaljnjega obvestila. Funkcije izdelka so odvisne od blaga. Če imate kakršna koli vprašanja, se obrnite na naše uradne distributerje.

Garancijska pogodba

• Garancijski roki od dneva dobave: 5 let.
• Brezplačna popravila ali zamenjava za težave s kakovostjo so zagotovljena v garancijskem roku.

Spodaj so izključene garancije:

• Izven garancijskih rokov.
• Vsaka umetna poškodba, ki jo povzroči visoka voltage, preobremenitev ali nepravilno delovanje.
• Izdelki s hudimi fizičnimi poškodbami.
• Škoda zaradi naravnih nesreč in višje sile.
• Garancijske nalepke in črtne kode so poškodovane.
• No contract signed by our company.

1. Popravilo ali zamenjava je edino pravno sredstvo za stranke. Naše podjetje ne odgovarja za kakršno koli naključno ali posledično škodo, razen če je to v skladu z zakonom.
2. Naše podjetje ima pravico spremeniti ali prilagoditi pogoje te garancije, pri čemer prevlada pisna izjava o odpovedi.