Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Specifikacije

• Ime izdelka: DALJINSKI UPRAVLJALNIK
• Model: RC302F
• Vnos: 3 x Battery AAA 1.5V
• Proizvajalec: Keeson Technology Corporation Limited
• Manufacturing Country: Kitajska

Navodila za uporabo

Osnovne prilagoditve

• Head Up: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Head Down: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Foot Up: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Foot Down: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Nagnite navzdol: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Posebne funkcije

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Časovnik masaže: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Stanovanje: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Memory Position: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

konecview

1. Glavo gor
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Glavo navzdol
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. Noga gor
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Noga dol
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar up
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar down
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Nagnite se navzgor
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Nagnite se navzdol
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Časovnik za masažo
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. Stanovanje
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. gumb ZG
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Položaj pomnilnika
    Click the memory position to move the actuator to the memory position.

IZJAVA FCC

Opozorilo FCC
Ta oprema je bila testirana in ugotovljeno je bilo, da je v skladu z omejitvami za digitalne naprave razreda B v skladu s 15. delom pravil FCC. Te omejitve so zasnovane tako, da zagotavljajo primerno zaščito pred škodljivimi motnjami v stanovanjski namestitvi. Ta oprema ustvarja, uporablja in lahko oddaja radiofrekvenčno energijo in lahko povzroči škodljive motnje radijskih komunikacij, če ni nameščena in uporabljena v skladu z navodili. Vendar pa ni nobenega zagotovila, da do motenj ne bo prišlo pri določeni namestitvi. Če ta oprema povzroča škodljive motnje pri radijskem ali televizijskem sprejemu, kar je mogoče ugotoviti z izklopom in vklopom opreme, uporabnika spodbujamo, da poskusi odpraviti motnje z enim ali več od naslednjih ukrepov:

• Preusmerite ali premaknite sprejemno anteno.
• Povečajte razdaljo med opremo in sprejemnikom.
• Priključite opremo v vtičnico na drugem tokokrogu kot tisti, na katerega je priključen sprejemnik.
• Za pomoč se posvetujte s prodajalcem ali izkušenim radijskim/TV tehnikom.

Vse spremembe ali modifikacije, ki jih ni izrecno odobrila stranka, odgovorna za skladnost, lahko razveljavijo uporabnikovo pooblastilo za uporabo opreme.
Ta naprava je skladna s 15. delom pravil FCC. Delovanje je odvisno od naslednjih dveh pogojev:

1. Ta naprava morda ne povzroča škodljivih motenj in
2. Ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje.

Informacije o izpostavljenosti RF

• Ocenjeno je bilo, da naprava izpolnjuje splošne zahteve glede izpostavljenosti RF. Napravo je mogoče uporabljati v prenosnih pogojih izpostavljenosti brez omejitev.

Opozorilo ISED RSS
Ta naprava je v skladu s standardi RSS za inovacije, znanost in gospodarski razvoj Kanade, ki so izvzeti iz licence. Delovanje je odvisno od naslednjih dveh pogojev:

1. This devicemay not cause interference, and
2. Ta naprava mora sprejeti vse motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje naprave.

Odpravljanje težav

• Daljinec se ne odziva: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• RF izpostavljenost: Ocenjeno je bilo, da naprava izpolnjuje splošne zahteve glede izpostavljenosti RF in se lahko brez omejitev uporablja v pogojih prenosne izpostavljenosti.

pogosta vprašanja

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• V: Ali lahko prilagodim intenzivnost masaže?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.