
INTERRA iX7 Touch Panel

Specifikacije
- Koda izdelka: ITR165-X0X4
- Napajanje: 12-30 VDC or PoE+
- Nazivna poraba toka: 350 mA @12 VDC
- Največja poraba toka: 640 mA @12 VDC
- Communication Current (from KNX Bus): 5 mA
- Nazivna poraba energije: 4.2 W pri 12 VDC
- Maks. Poraba energije: 7.7 W pri 12 VDC
- procesor: Štirijedrni ARM Cortex-A53
- Pomnilnik: 2 GB DDR3
- Shranjevanje: 8 GB EMMC
- OS: Interra Operation System based on AOSP 7.1
- Vrsta zaščite: IP 20
- USB: 2 x USB2.0
- KNX: 1 x KNX Connector
- Zunanje naprave: Temp/Hum Sensor, MEMS Microphone
- Gumb: Gumb za ponastavitev
- Omrežje: 100 Mbps Ethernet
- RTC: Real Time Clock up to 5 days
- GPIO: 6 Digital Dry Contact Inputs (the Sixth input supports Digital/Analog Mode), 6 Relay Outputs
- Temperaturno območje:
- Delovanje: 0°C do 45°C
- Skladiščenje: -15 ° C do 70 ° C
- Dimenzije:
- Panel: 125 x 210 x 54.15 mm (W x H x D)
- Mounting Box: 116 x 201 x 65 mm (W x H x D)
- Konfiguracija: With Interra Configurator Software
OPIS
Interra iX7 touch panel is designed to control the entire automation system from a single smart point. Interra İX7 can control complex systems such as switches, simple sensors, lighting, camera systems, and alarm systems from a central point. Moreover, iX7 can also control the air conditioning systems with 2 2-point mode by thermostat functionality. Mobile control can be done by downloading InterraX software from online software markets related to IOS or Android-based devices. Also, the configuration software (Interra Configurator) can be downloaded from our webspletno mesto (www.interratechnology.com) for the iX7 touch panel configuration.
MODELS AND VARIATIONS

MAIN FUNCTIONAL CHARACTERISTICS
- Avtomatizirano upravljanje: Control EIO (IO Module controlled over ethernet) and KNX automation systems with the Interra Touch Panel.
- Funkcija časovnika: Schedule operations daily, weekly, monthly, or annually using the panel s timer.
- Varnostni nadzor: Manage security systems and view cameras via the panel and mobile apps.
POVEZAVE 
voltage: The panel is powered with 12 12-30 VDC via 2 2-pos red coloured connectors. The connector label shows the correct polarity for cable connections.
KNX: The panel has a blue 2 2-pos connector for the KNX port. The connector label shows the correct polarity for cable connections.
USB: The iX7 features two USB host connectors on the side panel for storage expansion.
Ethernet: The panel includes a standard 10/100Mbps RJ45 Ethernet connector.
V/I: The panel has 6 digital dry contact inputs and 6 relay outputs, Input 6 (the sixth input) input)” can operate in digital or analog mode. A temperature sensor can be connected to input 6. Output relay contacts capable of driving 250VAC 5A resistive loads. 
Opomba: Input 6 operates in analog or digital mode on products that support analog functionality.
DIMENZIJE
pontage Box: 
Naprava

SPLOŠNE ZNAČILNOSTI 
MONTAŽA
- First, the mounting box must be attached to a suitable place on the wall. The long side of the mounting box should be placed at a right angle to the ground.
- Then, iX7 is attached to the mounting box as shown in the left figure, and the mounting process is completed.

VARNOSTNA NAVODILA
- Napravo lahko namesti in zažene samo usposobljen električar ali pooblaščeno osebje.
- For planning and construction of electrical installations, the appropriate specifications, guidelines, and regulations in force in the respective country must be followed.
- Ne povežite glavnega voltage (230 VAC) or any other external voltages to any point of the KNX bus.
- Priključitev zunanjega voltage might put the KNX system at risk. Please do not overlook this issue.
- Ensure there is sufficient insulation between the 230 VAC voltage cables and the KNX bus.
- The maximum screwing torque value should be 1.2 Nm during the mounting process of the mount case and touch panel.
- Do not use aerosol sprays, solvents, or abrasives that might damage the device.
- Zagotovljena mora biti dostopnost naprave za delovanje in vizualni pregled.
Dokumenti / Viri
![]() | iX7 Touch Panel |
Reference
- interratechnology.comwww.interratechnology.com
- Uporabniški priročnikmanual.tools
