IKEA HEMNES Solid Pine Desk Installation Guide

IKEA HEMNES Solid Pine Desk Installation Guide

HEMNES Solid Pine Desk

Navodila za montažo

This document provides assembly instructions for a furniture item, including safety guidelines, parts lists, hardware lists, and step-by-step assembly procedures.

Specifikacije

Komponenta Največja nosilnost
Main Item 150 LBS (68 kg)
Shelf/Drawer 11 LBS (5 kg)
drugo 22 LBS (10 kg)

Kratek vodnik

Read all instructions before beginning. Ensure all parcels are received. Assembly by two people is recommended. Use the parts and hardware lists to identify and separate components. Save all packing materials until assembly is completed.

NAVODILA ZA MONTAŽO

Pomembna varnostna navodila:
  • ● Please read all instructions before beginning assembly
  • ● Please make sure receive all the parcels to start the assembly
  • ● For your safety and convenience, assembly by two people is recommended
  • ● Use the parts and hardware lists to identify and separate each of the components included
  • ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware

Line drawing of a desk with a drawer and two open shelves on the left side.

HVALA ZA NAKUPASING

PARTS LIST

1 X1 2 X1 3 X1 4 X1 5 X1
6 X1 7 X1 8 X1 9 X1 10 X1
11 X1 12 X1 14 X1 15 X1 16 X1
17 X1 18 X1

Eksplodiral view diagram of a desk with numbered callouts 1 through 18 (excluding 13) pointing to various components.

Največja nosilnost

MAXIMUM WEIGHT: 150 LBS (68 KG)

NAJVEČJA TEŽA:

11 LBS (5 kg)

NAJVEČJA TEŽA:

22 LBS (10 kg)

Diagram of the assembled desk with callouts indicating weight capacity limits for the top, drawer, and shelves.

SEZNAM OPREME

Ime del Količina Rezervni
A A long, thin metal bolt with a hexagonal head and a threaded shaft. 11 1
B A metal nut with a hexagonal shape and a central hole. 11 1
C A metal rod or pin with a hexagonal head and a threaded shaft. 18 1
D A metal pin or bolt with a hexagonal head and a threaded shaft. 4
F A metal hook or bracket with a circular end and a threaded shaft. 1
G A metal bolt with a hexagonal head and a threaded shaft.

7/8″ vijak 		1 1
H A metal bracket or support with a curved top and a threaded shaft. 2
Ime del Količina Rezervni
I A metal screw with a hexagonal head and a threaded shaft.

2-3 / 8 ″ Vijak 		18 1
J A metal screw with a hexagonal head and a threaded shaft.

1/2″ vijak 		4
K A metal screw with a hexagonal head and a threaded shaft.

2″ vijak 		5 1
L A metal screw with a hexagonal head and a threaded shaft.

1-1 / 2 ″ Vijak 		4
M A metal screw with a hexagonal head and a threaded shaft.

9/16″ vijak 		2
O A metal screw with a hexagonal head and a threaded shaft.

2″ vijak 		2

1. KORAK

del Količina Opis
C 9 kos Leseni moznik
A 2 kos Odmični vijak

Prepare the wooden components by inserting hardware as follows:

  • 5. del: Insert 2 wooden dowels (C) into each end (4 total).
  • 4. del: Insert 2 wooden dowels (C) into the top edge.
  • 3. del: Insert 2 wooden dowels (C) into the top edge and 1 cam bolt (A) into the side. Tighten cam bolt (A) with a screwdriver.
  • 11. del: Insert 1 wooden dowel (C) into one end.

2. KORAK


Potreben je pomočnik.

del Količina Opis
K 4 kos Dolg lesni vijak
I 4 kos Dolg vijak

Assemble the main frame by connecting the side panels to the horizontal rails:

  • Povežite se 3. del do 5. del in 6. del using 4 screws (K).
  • Povežite se 4. del do 5. del in 6. del using 4 bolts (I).

3. KORAK

Potreben je pomočnik.


K

x 1 kos

Screw K


I

x 1 kos

Screw I
Assembly diagram for Step 3

4. KORAK


C

x 9 kos

Wooden dowel C
Close-up of wooden dowel C
Assembly diagram for Step 4

5. KORAK

Postavka Količina Slika
I 1 kos

Image: A long screw with a flat head and a threaded shaft.

  1. Attach board (10) to the raw edge of panel (7) using screw (I).

Končana stran

7

Surov rob

10

Image: Diagram for Step 5 showing board (10) being attached to the raw edge of panel (7) with screw (I). The finished side of panel (7) is also labeled.

6. KORAK

Postavka Količina Slika
B 2 kos

Image: A cam lock hardware component.

  1. Attach board (8) to frame component (3) using cam locks (B).

3

8

Image: Diagram for Step 6 showing board (8) being attached to frame component (3).

  1. 1 Image: Diagram 1: Insert bolt into the hole.
  2. 2 B Image: Diagram 2: Insert cam lock (B) into the hole.
  3. 3 Tighten Image: Diagram 3: Tighten the cam lock using a screwdriver.

7. KORAK

del Količina
Ⓘ x 4 kos

Diagram for Step 7 showing the assembly of a wooden frame. A screw (I) is used to secure a side panel (7) to the frame. The 'Raw Side' is indicated for parts 7 and 12. Other components labeled are 3 and 12.

8. KORAK

del Količina
Ⓘ x 8 kos

Diagram for Step 8 showing the assembly of a wooden frame. Screws (I) are used to secure side panels and rails. Components labeled are 2, 7, 8, 10, and 12.

9. KORAK


A
 		x 9 kos

Cam bolt A: A metal bolt used in conjunction with a cam lock for furniture assembly.
Close-up diagram showing a screwdriver tightening cam bolt A into a pre-drilled hole in the table top (1).
Main diagram for Step 9 showing the top panel (1) with 9 cam bolts (A) being installed around its perimeter.

10. KORAK


B
 		x 9 kos

Cam lock B: A circular metal fastener that locks onto a cam bolt to secure panels together.


O
 		x 2 kos

Long screw O: A long screw with a Phillips head, used for structural fastening.

With assistant carefully stand unit up.

Diagram 1: A circular inset showing the corner of the table frame being aligned with the top panel.
Diagram 2: A circular inset showing a cam lock (B) being inserted into the corner joint of the table frame.

3 Zategnite

Diagram 3: A circular inset showing a screwdriver being used to tighten the cam lock (B) in the corner joint.
Main diagram for Step 10 showing the table frame (labeled with parts 2, 3, 4, 5, 11) being attached to the top panel (1). Dashed lines indicate the placement of cam locks (B) and long screws (O).

11. KORAK

Strojna oprema Opis Količina
D Leseni moznik 4 kosov


Navodila za montažo:

12. KORAK

Navodila za montažo:

13. KORAK


H

x 2 kos

Bracket H


M

x 2 kos

Screw M

Do not use power screw driver,

use manual screw driver.

Step 13 assembly diagram

14. KORAK


J

x 4 kos

Screw J


L

x 4 kos

Vijak L

Do not use power screw driver,

use manual screw driver.

Step 14 assembly diagram

15. KORAK

Oznaka dela Količina Slika
F 1 kos

Image: Bracket F

G 1 kos

Image: Screw G

Diagram showing the installation of bracket F and screw G into the drawer front. The bracket is attached to the top edge of the drawer front, and the screw is inserted into the pre-drilled hole. The number 14 is shown in a circle next to the screw.

16. KORAK

  • -Move unit to final location.
  • -Adjust drawer fronts as shown below.
  • Step1–Loosen screws on back of drawer front brackets as shown.
  • Step2–Position drawer front as required.
  • Step3–Tighten screws while holding drawer front in position.

Zoomed-in diagram showing the adjustment mechanism of the drawer front bracket.

PREDAL PREDNJI VIEW

Image: Diagram showing centered drawer front alignment.

Image: Checkmark icon indicating correct alignment.

Image: Diagram showing off-center drawer front alignment.

Image: X icon indicating incorrect alignment.

Diagram showing the desk with the drawer front installed. The number 14 is shown in a circle next to the drawer front.


1. KORAK

Image: Diagram showing a screwdriver loosening a screw on the bracket with a counter-clockwise arrow.


2. KORAK

Image: Diagram showing the drawer front bracket with multi-directional arrows indicating the range of motion for adjustment.


3. KORAK

Image: Diagram showing a screwdriver tightening a screw on the bracket with a clockwise arrow.

Odpravljanje težav

No troubleshooting information is available in the provided text.

Dokumenti / Viri

PDF thumbnailHEMNES Solid Pine Desk
Installation Guide · HEMNES Solid Pine Desk, HEMNES, Solid Pine Desk, Pine Desk, Desk

Reference

Published: July 10, 2026

Postavite vprašanje

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Postavite vprašanje

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

IKEA SODERHAMN Corner Section Instruction Manual
10. julij 2026
IKEA SODERHAMN 3-Seat Section Instruction Manual
10. julij 2026
IKEA SODERHAMN 4-Seat Sofa Instruction Manual
10. julij 2026
IKEA LAGAN S, LAGAN L Wall Mounted Extractor Hood User Manual
10. julij 2026