konecview
This manual section covers the listed hardware/parts and provides step-by-step instructions for assembling the cabinet base frame and assembling the cabinet and drawer.
Hardware & Parts Reference
| Strojna oprema A | 15×9 mm — 12 pcs |
| Strojna oprema B | 8×30 mm — 12 pcs |
| Strojna oprema C | M8×40 mm — 4 pcs |
| Strojna oprema D | M6×50 mm — 4 pcs |
| Strojna oprema E | — 2 kos |
| Strojna oprema F | ST5×50 mm — 4 pcs |
| Strojna oprema G | — 1 kos |
| Hardware H | ST4×35 mm — 4 pcs |
| Hardware I | ST3.5×12 mm — 8 pcs |
| Hardware J | — 1 kos |
| Hardware K | M4×20 mm — 1 pc |
| Hardware L | — 4 kos |
| Hardware M | — 1 kos |
| Hardware N | ST3.5×18 mm — 4 pcs |
| Hardware O | — 12 kos |
Quick Setup / Use (Assembly Steps)
- Base & frame assembly: Assemble rails 14 and 15 using bracket K (repeat for two corners).
- Add rail 13 to the assembly of rails 14 and 15; tighten using screw C with wrench L.
- Complete the base frame by adding rail 12 to rails 13, 14, and 15; secure bracket K with screw C and wrench L.
- Attach the assembled base frame to the bottom of the cabinet body (part 2) using screws D.
- Cabinet & drawer assembly: Attach side panels 8 and 9 to base panel 7 using screws A.
- Slide back panel 11 into the grooves of side panels 8 and 9.
- Secure top panel 10 to the side panels 8 and 9 using four screws G.
- Attach drawer handle I to the drawer front using screw J.
- Attach drawer slides (E2) to the sides of the drawer using screws H.
- Insert the completed drawer into the main cabinet unit.
Hardware & Parts Reference
Komponente strojne opreme
| Strojna oprema A | Strojna oprema B | Strojna oprema C | Strojna oprema D | Strojna oprema E | Strojna oprema F |
|---|---|---|---|---|---|
| 15X9mm 12pcs | 8X30mm 12pcs | M8X40mm 4pcs | M6X50mm 4pcs | 2 kos | ST5X50mm 4pcs |
| Strojna oprema G | Hardware H | Hardware I | Hardware J | Hardware K | Hardware L |
|---|---|---|---|---|---|
| ST4X35mm 4pcs | ST3.5X12mm 8pcs | 1 kos | M4X20mm 1pc | 4 kos | 1 kos |
| Hardware M | Hardware N | Hardware O |
|---|---|---|
| ST3.5X18mm 4pcs | 4 kos | 12 kos |
Structure Reference Parts
| 1. del | 2. del | 3. del |
| 4. del | 5. del | 6. del |
Navodila za montažo
Base & Frame Assembly
7. korak: Assembling rails 14 and 15 using bracket K. The ‘x2’ indicates this is done for two corners. Inset showing the placement of bracket K onto the rail corner.
8. korak: Adding rail 13 to the assembly of rails 14 and 15. An 80% completion circle is shown. Inset showing screw C being tightened with wrench L to secure the rail.
9. korak: Completing the base frame by adding rail 12 to rails 13, 14, and 15. An 80% completion circle is shown. Inset showing bracket K being secured with screw C and wrench L.
10. korak: Attaching the assembled base frame to the bottom of the cabinet body (part 2) using screws D.
11. korak: The base frame is shown fully attached to the cabinet body. A 100% completion circle is shown. Inset showing wrench L being used for final tightening of the assembly.
12. korak: Končno view of the assembled cabinet. Inset showing hardware M and N being used to attach a component to the drawer front (part 6).
Cabinet & Drawer Assembly
13. korak: Side panels 8 and 9 are attached to base panel 7 using screws A. Inset diagrams show screw alignment.
14. korak: Back panel 11 is slid into the grooves of side panels 8 and 9.
15. korak: Top panel 10 is secured to the side panels 8 and 9 using four screws G.
16. korak: Drawer handle I is attached to drawer front 7 using screw J.
17. korak: Drawer slides E2 are attached to the sides of the drawer (8 and 9) using screws H. An inset shows the slide detail.
18. korak: The completed drawer is inserted into the main cabinet unit.
Dokumenti / Viri
| Nočna omarica |
Reference
- Uporabniški priročnikmanual.tools