FtyCamPro Uporabniški priročnik za vohunsko kamero

FtyCamPro Spy Camera

FtyCamPro Uporabniški priročnik za vohunsko kamero
FtyCamPro Vohunska kamera

Namestitev aplikacije

  1. Prenesite FtyCamPro z uporabo App Store za iOS in Google Play za Android. Za lažjo namestitev skenirajte naslednjo kodo QR.
    Opomba: Priporočamo, da za prenos aplikacije uporabite vgrajen brskalnik ali drug skener kode QR. Aplikacije ne morete prenesti s skenerjem WeChat.
    Qr koda
    Aplikacija
  2. Odprite FtyCamPro cam, pritisnite »+«, da dodate omrežno kamero (ime je podobno XXX-nnnnnn-YYYYY).
    Namestitev aplikacije
  3. Pojdite na stran za povezavo WiFi, izberite ustrezno omrežje in se povežite (ime je podobno XXX-nnnnnn-YYYYY). Ko je povezava uspešna, se vrnite v aplikacijo in naprava bo uspešno dodana. (Če se aplikacija ne poveže samodejno z napravo, kliknite iskanje, da dodate želeno napravo.)
    Namestitev aplikacije
  4. Ko je kamera uspešno povezana, jo izberite za zajemanje videoposnetkov v realnem času. Napravo lahko upravljate preko video vmesnika.
    Namestitev aplikacije
  5. Glavne ikone in gumbi na video strani.
    Namestitev aplikacije
    Posnemite posnetke in videoposnetke
    Namestitev aplikacije
    Navpično in vodoravno vrtenje slik
    Namestitev aplikacije

Nastavitve kamere

  1. Pritisnite gumb za nastavitve orodja, da odprete stran z naprednimi nastavitvami.
    Nastavitve kamere
  2. Vnesite ime kamere in kodo P2P (privzeto geslo: admin) in kliknite »Da«. Kamera se bo uspešno povezala. Po končanih nastavitvah kamere vam svetujemo, da spremenite kodo P2P.
    Nastavitve kamere
  3. Nastavite WiFi povezavo za kamero. Izberite »Nastavitve WiFi«, da vidite razpoložljiva omrežja. Izberite svoje WiFi omrežje (SSID), vnesite geslo in pritisnite »Dokončano«.
    Opomba: Če se kamera po shranjevanju poveže z WiFi, bo za približno minuto zaprla aplikacijo, da se vzpostavi povezava.
    Nastavitve kamere
  4. Nastavitve registracije kartice SD
    Nastavitve kamere

Glavne nastavitve in indikatorska lučka
Če želite priključiti novo kamero, jo ponastavite na prvotne nastavitve. Ko je kamera vklopljena, pritisnite in držite »MODE« več kot 5 sekund in indikatorska lučka bo počasi utripala (enkrat na 0.5 sekunde). Nato odprite nastavitve mobilnega telefona, povežite mobilni telefon z omrežjem kamere in počakajte, da se poveže, preden odprete aplikacijo.

Indikatorska lučka:

  1. Ko je v načinu AP, utripa modra lučka. Rdeča lučka se nanaša na delovanje USB in ugasne, ko je naprava popolnoma napolnjena.
  2. Med nastavitvijo WiFi vedno sveti modra lučka. Če modra lučka utripa, preverite, ali je geslo za WiFi pravilno.

Opomba: Če ima aplikacija še vedno težave, preverite naslednje parametre:

A. Če se mobilni telefon ne more povezati s kamero dostopne točke, povežite mobilni telefon z dostopno točko dostopne točke kamere.
B. Javno omrežje WiFi, ki zahteva geslo za prijavo, morda ni združljivo.
C. Izogibajte se vnosu napačnega imena omrežja, gesla in UID-ja.
D. Kitajska imena omrežij WiFi, gesla in posebni simboli niso združljivi.
E. Signali 5G WiFi niso združljivi.

pogosta vprašanja

1.Zakaj aplikacija ne zazna/ne more vzpostaviti povezave z omrežjem?

Preverite, ali je naprava pravilno povezana in preverite, ali je delovanje aplikacije omejeno.

2.Zakaj me kamera nenehno sprašuje, da vnesem uporabniško ime in geslo? / Zakaj mi kaže, da vnašam napačno uporabniško ime?

Če pozabite uporabniško ime ali geslo, se lahko vrnete na prvotne nastavitve in poiščete privzeto uporabniško ime in geslo.

3.Kako ponastavim fotoaparat na prvotne nastavitve?

Pritisnite gumb “MODE” za približno 5 sekund, dokler se kamera znova ne zažene.

4.Zakaj je slika zamegljena?

Odstranite zaščitno folijo z leč. Če je slika še vedno zamegljena, zavrtite lečo in se osredotočite na sliko.

Dokumenti / Viri

PDF thumbnailVohunska kamera
User Manual · Spy Camera, Camera

Reference

Objavljeno: 28. maj 2023

Vprašanja in odgovori

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

How do I fix blurry images, mount the camera properly, and does it have night vision?

Based on the FtyCamPro Spy Camera manual, here are the solutions to the issues you mentioned:Blurry Image: First, ensure you have removed the protective film from the lens. If the image remains blurry, you...

Read full answer How to install two cameras in FtyCamPro?

To install multiple cameras in the FtyCamPro app, you simply need to repeat the pairing process for each individual device. The app is designed to manage multiple cameras within the same interface.Follow these steps...

Read full answer How can I find the ID or QR code for my FtyCamPro Spy Camera?

To find the ID or QR code for your FtyCamPro Spy Camera, please check the following locations:Physical Device: The unique device ID (UID) or a QR code is typically printed on a sticker located...

Read full answer

Vprašanja in odgovori

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. bonjour,pouvez vous m envoyer ID ou le QR de ma camera merci d avance.

    VIDAL fabrice asks bonjour,pouvez vous m envoyer ID ou le QR de ma camera merci d avance.
    Manuals+ clarified question
    vprašanje

    How can I find the ID or QR code for my FtyCamPro Spy Camera?

    Odgovori

    To find the ID or QR code for your FtyCamPro Spy Camera, please check the following locations:

    • Physical Device: The unique device ID (UID) or a QR code is typically printed on a sticker located on the back or bottom of the camera itself.
    • Nastavitve WiFi: When the camera is in AP (Access Point) mode, it broadcasts a WiFi signal. Go to your phone's WiFi settings; the camera's ID is usually the name of the network (e.g., XXX-nnnnnn-YYYYY).
    • Vmesnik aplikacije: Once the camera is connected to the FtyCamPro app, you can find the DevID (Device ID) by going to the Nastavitve kamere (gear icon) and selecting the Dostop or Informacije o napravi strani.

    If you are looking for the QR code to prenesite aplikacijo, it is provided in the manual. If you have lost the physical sticker on the camera, resetting the device by holding the NAČIN button for 5 seconds will allow you to find its ID again via the WiFi hotspot method mentioned above.

    Read the full Q&A page

    Odgovori

  2. This is absolutely garbage! Picture is bad, minimal instructions, and an adhesive only camera as far as mounting? It doesn’t stick to brick very well. Also with the heat here in the south it falls right off! Does it not have night vision of some sort? I have absolutely no clue because of lack of an owners manual, and cannot see anything with the lights off! 2 guys who wanted to make a better camera my ass! This things absolutely sucks!!

    Brian Boudreaux asks This is absolutely garbage! Picture is bad, minimal instructions, and an adhesive only camera as far as mounting? It doesn’t stick to brick very well. Also with the heat here in the south it falls right off! Does it not have night vision of some sort? I have absolutely no clue because of lack of an owners manual, and cannot see anything with the lights off! 2 guys who wanted to make a better camera my ass! This things absolutely sucks!!
    Manuals+ clarified question
    vprašanje

    How do I fix blurry images, mount the camera properly, and does it have night vision?

    Odgovori

    Based on the FtyCamPro Spy Camera manual, here are the solutions to the issues you mentioned:

    • Zamegljena slika: First, ensure you have removed the protective film from the lens. If the image remains blurry, you can manually rotate the lens to adjust the focus until the picture is clear.
    • Nočni vid: The provided manual does not explicitly list infrared night vision as a feature. If you cannot see anything with the lights off, the camera likely requires a minimum amount of ambient light to produce an image, or it may not be equipped with IR LEDs.
    • Montaža: The manual does not provide alternative mounting instructions beyond the adhesive. For difficult surfaces like brick or in high-heat environments where adhesives fail, you may need to use a third-party mounting bracket or a stronger outdoor-rated mounting tape.
    • Ponastavitev naprave: If you need to start over due to the "minimal instructions," you can reset the camera to factory settings by pressing and holding the NAČIN button for about 5 seconds until the camera restarts.

    Read the full Q&A page

    Odgovori

  3. Como instalar duas câmeras no Ftycampro?

    Maristela asks Como instalar duas câmeras no Ftycampro?
    Manuals+ clarified question
    vprašanje

    How to install two cameras in FtyCamPro?

    Odgovori

    To install multiple cameras in the FtyCamPro app, you simply need to repeat the pairing process for each individual device. The app is designed to manage multiple cameras within the same interface.

    Follow these steps for each camera you wish to add:

    1. Odprite aplikacijo: Launch FtyCamPro on your mobile device.
    2. Dodaj napravo: Pritisnite "+" button on the main screen to add a new network camera.
    3. Connect to Camera Hotspot: Go to your phone's WiFi settings and connect to the network named similarly to XXX-nnnnnn-YYYYY (this is the camera's unique hotspot).
    4. Konfigurirajte WiFi: Return to the app. If it doesn't add automatically, click on search. Go to "WiFi Settings" within the camera's advanced settings, select your home WiFi network (SSID), and enter your password.
    5. Dokončaj: Once saved, the camera will reboot and connect to your router. It will then appear in your device list alongside any previously added cameras.

    Opomba: If you are adding a camera that was previously used, it is recommended to reset it first by holding the "NAČIN" button for more than 5 seconds until the indicator light flashes slowly.

    Read the full Q&A page

    Odgovori

Postavite vprašanje

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

FtyCamPro Priročen uporabniški priročnik za odjemalce
30. avgust 2023