Fender Quantum HD Software

Specifikacije

• Product Name: Quantum HD Series
• Interface Type: Audio Interface
• Manufacturer: Fender
• Združljivost: Windows, macOS
• Povezava: USB-C

konecview

• This Software User Manual details how to use Universal Control to control Quantum HD audio interface. Before jumping in, make sure you’ve registered your device and installed Universal Control, as it provides updates and upgrades for your Quantum interface.
• For more information about the Quantum HD, including hardware features, hookup diagrams, and getting started with the interface, please review vaš uporabniški priročnik Quantum.

Postopek registracije in namestitve izdelka
Vaš Quantum HD je zmogljiv zvočni vmesnik, poln profesionalnih zvočnih orodij in prilagodljivih kontrolnikov za spremljanje. Preden se povežete z računalnikom, obiščite www.fender.com and navigate to the Quantum HD product page to verify the latest system requirements for your interface. Once you’ve verified that you meet the latest system requirements, follow these steps:

1. Visit My.Fender.com and create or log into your user account.
   • Note: If you have previously created a MyPreSonus account, you can use these credentials on MyFender.com to log in. All of your previous registered PreSonus products will be available from the new unified MyFender account experience.
2. At the top of your MyFender homepage, click onto the “Register Products” button. After clicking, a dialog window will appear.
3. From the dialog window, specify the date you purchased the interface and the serial number on your interface. After you’re done,click “Register.”
4. After clicking Register, another dialog window will appear where you can initiate your Fender Studio Pro downloads.
5. To download Universal Control, navigate to the Quantum HD product page from your MyFender homepage.

Opomba:
The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will greatly affect the overall performance of your recording system. A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.When connecting to Universal Control, you have two options:

• Connect and sync your Quantum HD interface to your desktop via USB-C connection. This option allows you to use Universal Control while recording and playing back audio through Fender Studio® Pro or a third-party DAW of your choice.
• Connect your desktop, Apple iOS / Android device, or iPad to the same wireless network. This option will allow you to use any or all of these devices to remote control your Quantum interface anywhere in the studio or venue.

The following sections detail the Universal Control installation process for Windows, Mac, iPad, and Apple iOS / iPadOS /
naprave Android.

Opomba:
Make sure your Quantum interface firmware version is up to date from your computer before connecting to the device any other way.

Namestitev univerzalnega nadzora za Windows

• Povežite svoj vmesnik Quantum z razpoložljivimi vrati USB-C in zaženite namestitveni program. Namestitveni program Universal Control vas bo popeljal skozi vsak korak postopka namestitve.
• This application will install the ASIO drivers. Please read each message carefully. It is recommended that you quit all applications before you start the installation.

Namestitev univerzalnega nadzora za macOS

• Povežite svoj vmesnik Quantum z razpoložljivimi vrati USB-C in zaženite namestitveni program. Namestitveni program Universal Control vas bo popeljal skozi vsak korak postopka namestitve.
• Naprave serije Quantum zahtevajo gonilnik po meri. Ta gonilnik je vključen v aplikacijo Universal Control.
• Po namestitvi in ​​zagonu Universal Control vas lahko varnost macOS pozove, da »Odobrite sistemsko razširitev zvočnega gonilnika«.
• For macOS 15/26 Users: Open System Settings → General → Login Items & Extensions → click the “i” icon next to Universal Control.
• Operacijski sistem vam bo ponudil možnost »V redu« ali »Odpri sistemske nastavitve«. Izberite »Odpri sistemske nastavitve« ali, če ste že kliknili »V redu«, odprite Sistemske nastavitve > Zasebnost in varnost.
• Opomba za uporabnike macOS: Ko je namestitev končana, boste aplikacijo Universal Control našli v mapi z aplikacijami. Priporočljivo je, da to postavite v Dock za lažji dostop.

Za uporabnike macOS 12/13:

• Izberite »App Store in identificirani razvijalci«, če to še ni nastavljeno. Izberite »Dovoli«, da lahko Universal Control doda gonilnik Quantum. Vnesite svoje sistemsko geslo, kot je zahtevano.

Za uporabnike macOS 14:

• Izberite »App Store in identificirani razvijalci«, če to še ni nastavljeno. Kliknite »Podrobnosti«.
• Izberite svoj način preverjanja pristnosti.
• Aktivirajte univerzalne možnosti nadzora in kliknite V redu.
• Zdaj ste pripravljeni na uporabo vašega novega Quantum!

Universal Control Installation for Apple iOS / iPadOS / Android
To remote control your Quantum interface with Apple iOS / iPadOS / Android devices, you must first locate and install the Universal Control application onto your Apple iOS / iPadOS / Android device from your app store. Once downloaded, you can use Universal Control with an Apple iOS / iPadOS / Android device by connecting to the same wireless network as the computer that is connected via USB to your Quantum interface.

Upoštevajte:
Quantum interface firmware can only be updated from your computer. Firmware updates from Universal Control are not available from Apple iOS / iPadOS / Android mobile devices.

iPadOS Low Latency Driver

• When using the latest iPad Air M3 and iPad Pro M5, round trip lag (latency) can be reduced by up to 40% (2-3ms less latency) by enabling the Quantum USB Audio Driver from your iPad settings. Once Universal Control is installed on your iPad, navigate to iPadOS’s Settings > Apps > Universal Control and turn on the Quantum USB Audio Driver.
• Note: This driver only applies to Apple iPadOS 18+. Not applicable to any earlier iPadOS versions nor any version of Android.

Mobile Compatibility Modes

• Due to limitations to some operating systems, the Quantum HD includes various mobile modes, which allows it to be used on Android devices with Android version 14 or later.

When using Quantum HD with a device that has Android 14+, ensure that the correct mobile mode is selected. To change modes from your Quantum HD, press and hold  the knob until the “Settings” screen appears. Navigate to “Mobile Mode” (shown as “Device Mode” in Universal Control), then press the knob to select a mode.

• Off: Use this mode for macOS, Windows, and iOS / iPadOS devices (no channel or sample rate limitations).
• Android: Use this mode for Android OS 14+ devices. This option is best for most applications and supports 2 (QHD 2) or 8 (QHD 8) input channels.
• Android+: This mode is also used for Android OS 14+ devices (for use with specific applications that can access full channel counts).

Opomba:
Največji sample rate possible for both Android and Android+ modes is 48 kHz.

Univerzalni nadzor

• Universal Control is both a driver-management utility and software control interface for your Quantum Interface

Univerzalni nadzor zagotavlja naslednje:

• Hardware Control. All of Quantum’s front panel hardware controls can be adjusted using Universal Control, facilitating easy hardware manipulation even if Quantum is installed in a location out of reach of the computer operator.
• Spremljanje z nizko zakasnitvijo. Uporaba univerzalnega nadzora odpravi zakasnitev, povezano z medpomnjenjem V/I DAW, zaradi česar je spremljanje za izvajalca problematično. Z odstranitvijo funkcije spremljanja vnosa programske opreme DAW iz pretoka nadzornega signala v celoti ni več težava po prilagajanju velikosti medpomnilnika V/I in zakasnitve.
• Pošiljanje / izkazovanje avtobusov. Universal Control ima stereo aux vodila z neodvisnimi stopnjami pošiljanja na vhod.
• Upravljanje konfiguracije (scene). Konfiguracije univerzalnega nadzora je mogoče shraniti in naložiti na/z diska kot scene za priročno in neomejeno upravljanje sej.

Universal Control has two main components: the Start and the Mixer pages. We’ll go into more detail about each in the sections below.

Universal Control Start Page
Universal Control contains driver support, software control, monitor mixing, and firmware management for Fender and PreSonus hardware. After opening Universal Control, you will see the Launch window. From this window, you can manage all the driver settings.

• Sample Oceni. Spremeni sample stopnja. Nastavite lahko sampnastavite na 44.1, 48, 88.2, 96, 176.4 ali 192 kHz. Višji sampLe stopnja bo povečala zvestobo snemanja, vendar bo to povečalo tudi file velikost in količino sistemskih virov, potrebnih za obdelavo zvoka.
• Vir ure. Nastavi vir digitalne ure. V tem meniju lahko nastavite vir ure za vmesnik Quantum HD. Notranji, zunanji S/PDIF, zunanji ADAT ali Wordclock (samo Quantum HD 8).
• Buffer Size (Windows only). Sets the Buffer Size. From this menu, you can set the Buffer Size for your Quantum HD interface from 16 to 2048 samples. Lowering the buffer size will reduce the overall latency. However, this will also increase performance demands on your computer. In general, you will want to set the buffer size as low as your system can safely support. If you begin to hear pops, clicks or distortion in your audio path, try raising the buffer size.
• Device Mode (HD8 only): Displays the current device mode.
• Input Format. Details your device, input channels, and bitrate.
• Izhodni format. Podrobnosti o izhodnih kanalih in bitni hitrosti vaše naprave.
• Vdelana programska oprema. Prikaže trenutno različico vdelane programske opreme.
• Serijska številka. Prikaže vašo serijsko številko Quantum.

Zagon univerzalnega krmilnega mešalnika
Universal Control’s Mixer can be launched from the Universal Control application (Start Page).

1. Odprite univerzalni nadzor.
2. From the Universal Control Start Page, click on the product card for the Quantum HD Control Panel (mixer).
3. Univerzalni nadzorni mešalnik se bo odprl v drugem oknu.

Zapustitev univerzalnega nadzora

Za uporabnike macOS:

• Izberite »Quit Universal Control« v meniju aplikacij macOS, ko je Universal Control aplikacija v ospredju.
• Uporabite standardno bližnjico na tipkovnici macOS: Command + Q.

Za uporabnike sistema Windows:

• V naslovni vrstici okna kliknite gumb za zapiranje »X«.

Univerzalni kontrolni mešalnik
Universal Control’s layout and functionality is similar to what is found on analog mixers and shares many elements with Fender Studio Pro’s mixer layout.

Navigacijska vrstica
The navigation bar has two options to choose from:

• Scenes. Shows / Hides the Scenes panel. See section 2.2.7 Scenes for more information about how to use this feature.
• Plošča z nastavitvami. Prikaže / skrije ploščo z nastavitvami (nadomešča mešalnik). Glejte razdelek 2.2.8 Nastavitvena plošča za več informacij o uporabi te funkcije.
• Power Button. Turns the mixer on or off. Turning the mixer “off” bypasses the mixer in Universal Control, which can be helpful if you would like to mix and create cue mixes directly in the DAW.

Channel Overview

Kanalski vhodi

• Vsak vhodni trak kanala nadzoruje ustrezen vhod strojne opreme Quantum ali virtualni vhod. Izhod vseh vhodov kanala je vedno usmerjen na glavna izhoda 1 in 2 (razen ko je utišan). Vhode je mogoče izbirno usmeriti na druge izhode prek pošiljanja in krmilnikov FlexChannel. Vhodi univerzalnega nadzornega kanala so v bistvu enaki za vse vhode; vendar obstajajo nekatere razlike med analognimi in digitalnimi vhodi, kot je navedeno spodaj.

Kontrole vnosa kanala

• High Pass Filter (HPF). Engages/disengages an HPF at 80 Hz with a slope of 12 dB per octave.
• 48V. Vklopi/izklopi 48 V fantomsko napajanje za uporabo s kondenzatorskimi mikrofoni.
• Samodejno pridobitev. Samodejno nastavi ojačanje za izbrani kanal.
• Pad. Cycles through -20 dB or no pad attenuation (default). Pad does not affect the Line or Instrument inputs.
• Prejamp Raven pridobitve. S tem kontrolnikom nastavite ojačanje (0 dB do +75 dB) za vaš mikrofon ali instrument.
• Line Input Level. If a line-level signal is connected through the TRS port of the combo jack, then preamp nadzor ojačanja preklopi na nadzor nivoja linije (-12 dB do +12 dB).
• Pridobite vrednost. Prikaže absolutno vrednost za trenutni dobiček. Dvokliknite vrednost, da vnesete določeno vrednost.

pošilja
Controls the send level of the audio being sent to the Return FlexChannel. Depending on your hardware, different amounts of outputs will be available as Sends. Loopback virtual outputs can be shown in Settings as well (see section 2.2.8 Settings Panel).

• Pošlji cilj. Prikazuje izhodni par, v katerega je poslan zvok.
• Pošlji raven. Nadzoruje splošno raven, ki se pošilja v izhodni par.
• Note: If Speaker Switching is active, outputs 3 – 4 will be disabled for Sends.

Univerzalni kontrolni mešalnik

Kontrole mešanja

• Pan. Nastavi položaj panorame za signal v stereo mešanici (velja tudi za pošiljanje).
• Mute. Utiša signal (velja tudi za pošiljanje).
• Solo. Solo signal (utiša vse druge kanale v glavnem miksu).
• Mono / Stereo Preklop povezave. Združi 2 sosednja kanala iste vrste v stereo kanal.
• Trenutna vrednost ravni. Prikaže absolutno vrednost za trenutno raven. Dvokliknite vrednost, da vnesete določeno vrednost.
• Merilnik kanalov. Prikaže trenutno raven predfaderja vašega mikrofona ali instrumenta.
• Pojemanje kanala. Nadzoruje splošno raven kanala v glavnem miksu.
• Številka kanala. Označuje številko kanala.
• Ikona kanala. Izberite s seznama ikon za kanal
• Ime kanala. Dvokliknite, da ustvarite ime po meri za kanal.
• Barva kanala. Kliknite prostor, da se prikažejo barvne možnosti kanala.

FlexChannel Return
Vhodni kanali so vedno usmerjeni na glavna izhoda 1 in 2. Vendar pa je mogoče vhode opcijsko usmeriti na kateri koli razpoložljiv izhod strojne opreme ali povratni tok prek pošiljanja in FlexChannel.

• Nazaj Izberite. Izbere povratni ali povratni tok, ki ga bo nadzoroval kanalski trak.
• Copy / Paste Mix: Copying the current mix allows you to quickly set up multiple mixes. Right-click on the fader for copy and paste options.
• Fader Flip: When Flip is activated, fader controls switch to represent the per-channel Send levels of the chosen Send destination. Faders will change to green to indicate Flip is active; when activated, the fader controls the send level rather than the channel volume.
• Mute. Utiša izbrani povratni ali povratni tok.
• Telefoni Poslušaj. S klikom na ikono slušalk lahko poslušate kateri koli miks. To bo izbrano mešanico usmerilo v slušalke 1 (če je več kot ena slušalka), tako da boste lahko poslušali svoje mešanice.
• Preklop mono/stereo. Preklopi kanal med stereo kanalom ali seštejnim mono kanalom.
• Trenutna vrednost ravni. Prikaže absolutno vrednost za trenutno raven. Kliknite na vrednost, da vnesete določeno vrednost.
• Merilnik kanalov. Prikaže trenutno raven.
• Pojemanje kanala. Nadzoruje splošno raven za izbran povratni ali povratni tok.
• Ikona kanala. Izberite s seznama ikon za kanal
• Ime kanala. Dvokliknite, da ustvarite ime po meri za kanal.
• Barva kanala. Kliknite na prostor, da prikažete izbirnik barv.

Kontrole monitorja
Trak za nadzor monitorja vsebuje elemente, povezane z glavnimi izhodi, slušalkami in preklapljanjem zvočnikov.

• Main Out Level. To je glavni nadzor ravni za glavna izhoda Quantum 1 in 2. Izvaja enako funkcijo kot gumb na sprednji ali zgornji plošči Quantum.
• Headphone Level. These is the level controls for Headphone Output 1 and 2. It performs the same function as the Knob on Quantum’s front or top panel when the Knob is switched to Headphone control. The Quantum HD 2 only has one headphone output.
• Dim. Zatemni glavni izhod za količino, nastavljeno v nastavitvah (privzeto je -10 dB)
• Preklop zvočnikov. Ko je preklapljanje zvočnikov aktivno, se spremeni bodisi v komplet zvočnikov A bodisi v komplet B. Upoštevajte, da ta možnost ni na voljo in je privzeto siva.
• Mute. Utiša glavni izhod. Izklop zvoka ne vpliva na slušalke.
• Telefoni Poslušaj. To bo usmerilo glavni miks (izhodi 1/2) na slušalke 1.
• Level Value. Displays the absolute value for the current level. Click on the value to enter a
  specifično vrednost.
• Merilniki monitorja. Ti merilniki prikazujejo nivoje signala mešalnega vodila monitorja tik pred nadzorom nivoja monitorja.
• Pojemanje kanala. Nadzoruje splošno raven za glavne izhode. Ta nadzor glasnosti je neodvisen od glavnega kodirnika. Če je regulator obrnjen navzdol, zvok ne bo prešel do glavnega nadzora glasnosti.
• Številka kanala. Označuje številke kanalov.
• Channel Icon. Choose from a list of icons for the channel. All Icons can be shown/hidden from the Settings panel.
• Ime kanala. Dvokliknite, da ustvarite ime po meri za kanal.
• Barva kanala. Kliknite na prostor, da prikažete izbirnik barv. Celoten kanal lahko obarvate v nastavitvah.

Prizorišča
Universal Control vam omogoča ustvarjanje in shranjevanje knjižnice "scen". Prizor je kot posnetek vaše mešanice: shrani vsak parameter kanala za vsak analogni vhod, kot tudi položaj vsakega faderja, mešanice aux, utišanje kanalov in solaže itd.

Prizorišča nudijo metode za upravljanje konfiguracij mešalnika Universal Control kot prednastavitev po meri files. When a Universal Control Scene is saved, the current Universal Control configuration is saved to your computer. When a Scene is subsequently reloaded, Universal Control is returned to the same configuration state, regardless of any changes to Universal Control that were made in the interim.

• Ikona prizorov ( ): Select to open (blue) and close (gray) the Scenes window.
• Save: Saves the current mixer configuration to the selected Scene (overwrite).
• Load: Loads the selected Scene (double-clicking the chosen Scene will also load it).
• Store Scene: Click the plus icon to save the current mixer configuration and give it a name.
• Delete Scene: Deletes the selected Scene.

Plošča z nastavitvami
Globalni parametri za Quantum in Universal Control so konfigurirani v podoknu z nastavitvami:

Nastavitve strojne opreme:

• Sends. Changes which outputs are available for Sends (For more information, check out Section 3.1.2).
• Main Encoder. Select which speaker(s) are controlled by the knob.
• Preklapljanje zvočnikov. Izberite vedenje za preklapljanje zvočnikov ob pritisku glavnega upravljalnega gumba.
• Headphone Source Selector (“HP Source”). Selects the source for the Headphone Output 1 or 2. Access to certain headphone sources is dependent on the Quantum model.
• S/PDIF Output Source. Selected which source is sent out of the S/PDIF RCA port.
• Obnašanje gumba za izklop zvoka. Izberite, ali gumb Mute na zgornji ali sprednji plošči utiša zvok na glavnih izhodih ali zatemni zvok.
• Dim Amount. Prilagodi količino zatemnitve, ko je vključena zatemnitev (privzeto je -10 dB)
• Svetlost LED. Prilagodi splošno svetlost vseh LED (privzeto je 100 %)
• Tovarniška ponastavitev. Ponastavi vse parametre na tovarniške nastavitve.

Nastavitve uporabniškega vmesnika:

• Barvanje kanalov. Uporabi trenutno izbrano barvo kanala za celoten trak kanala.
• Peak Hold. Vklopi ali izklopi Peak Hold.
• Show all Digital (Quantum HD only). Shows or hides all ADAT and S/PDIF inputs in the mixer. Hidden by default.
• Show all Loopback. Shows or hides all Loopback Inputs, Stream Mix Sends, and Flex Mix Stream Mixes in the mixer. Hidden by default.
• Edit Popup: Shows or hides the popup editor.
• Razpad merilnika. Nastavi upadanje merilnika na počasno, srednje ali hitro.

Uporaba mešalnika Universal Control

Povratna zanka
Loopback audio is the industry term for routing audio from one application to another. Applications that use audio interfaces, like your Quantum interface, are designed to receive audio from one audio device and send audio to one audio device. This means that most applications can only send to and receive from an audio interface, but not from other applications. This can present a challenge in certain situations. Fortunately, Quantum HD audio interfaces allow you to take audio from any of Universal Control’s mixer inputs (mics, guitars, computer audio, etc.) and send the combined audio to another application for the purpose of recording or live streaming.

Kako uporabljati Loopback
Če želite uporabiti funkcijo Loopback, sledite spodnjim navodilom:

1. Make sure that your Quantum HD is selected as the Windows or macOS playback device.
2. In your DAW or software application, choose the channel input labeled Loopback 1 or Loopback 2. Any audio sent to Loopback 1 or 2 will be available as a virtual input in your DAW or other software applications (not all software applications support multichannel inputs).
   Note: Loopback inputs are disabled at sampfrekvenci 176.4 in 192 kHz.
3. In Universal Control’s mixer window, adjust the send level to whichever Loopback send you’ve selected in Fender Studio Pro.
   • Nivo pošiljanja povratne zanke 1. Prilagodite količino zvoka, ki ga želite poslati v povratni tok 1.
   • Nivo pošiljanja povratne zanke 2. Prilagodite količino zvoka, ki ga želite poslati v povratni tok 2.
4. Ko prilagodite raven pošiljanja povratne zanke, boste opazili, da se ravni merjenja pojavljajo v DAW ali kanalu programske aplikacije, ki ste ga nastavili. Ko se prikaže merjenje, ste pripravljeni na začetek snemanja zvoka.

OPOZORILO:
Prepričajte se, da je kanal v vaši DAW izklopljen, preden omogočite snemanje, da se izognete povratnim zankam.

Kvantni večkanalni
Multichannel is a hardware and software operating mode that can be configured using Universal Control. Quantum HD 2 and HD 8 interfaces can be used as an all-in-one monitoring hub for some multichannel formats (depending on the amount of analog outs per device).
Ko je izbran večkanalni način, bo gumb krmilil vse ustrezne glasnosti zvočnikov hkrati. Za več informacij o posamezni večkanalni možnosti poglejteview spodnji seznam:

• None: Knob control is disabled and unity audio will be sent out of all outputs.
• All: The knob will control the output volume for all outputs at the same time.
• 1 – 2: The default Main Encoder mode. The knob will control the output volume for Main Outputs 1 and 2.
• 1 – 4: The knob will control the output volume for Outputs 1, 2, 3, and 4 all at the same time.
• 1 – 6 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, and 6 all at the same time.
• 1 – 8 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, 6, 7, and 8 all at the same time.
• All + ADAT: The knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.

OPOZORILO:
Full-scale audio will be sent out of Main Outputs 1 and 2. Main Outputs 1 and 2 will be muted when this mode is selected to avoid damaging speakers or other equipment.

Using Your Quantum Interface

Kot zvočni vmesnik

• The Quantum HD functions like other audio interfaces when used without the Universal Control application installed. Quantum HD’s class-compliant (macOS) and WDM drivers (Windows) enable it to be used for computer audio I/O routing with any compliant software with some limitations.

Samostojna uporaba (HD 8 ADAT Preamp razširitev)
The Quantum HD 8 can be used to add mic pres to another Quantum HD running in audio interface mode (with Universal Control installed) or a third party audio interface that supports ADAT optical inputs as well as S/MUX and its variants. To use a second or third Quantum HD as a standalone preamp through ADAT, access the secondary or tertiary Quantum HD’s Global Settings when not connected to a computer and set the Standalone mode to “ADAT.” By default, this mode is set to “Mixer.”

• As long as the additional HD 8 is put into ADAT mode, and the clock source is set to externally clock via SPDIF, ADAT, or Word Clock, the 48V and Gain Knob controls will be present at the top of each ADAT fader.
• Note: When in ADAT mode, the knob of the HD 8 expansion will no longer control volume and will blink 3 times if turned in either Main or Headphone control modes.
• The knob will still control gain level if a channel is selected.
• If you select “All + ADAT” from the Main Encoder settings, the knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.
• Note: As with any of the other Main Encoder link modes, as outputs get assigned to be controlled by the knob, those outputs paths become unavailable as Sends for cue mix routing, etc.

 Send Routing Options
Quantum HD interfaces have two send options located in the Universal Control settings panel. Depending on which option is selected, ADAT Sends and computer playback channels (ex., USB 5/6) will become available or unavailable. In either mode, Loopback 1 and Loopback 2 are available as Sends on any input channel.

• Analog Out (default). When analog out is selected, Sends can only be routed to the physical analog outputs of Quantum (for example, Out 3/4, Out 5/6, etc.). When this option is selected, ADAT signals can be easily routed from your DAW.
• Analog + ADAT. When Analog + ADAT is selected, the mixer is reconfigured so that all analog and ADAT outputs are available as Sends on input channels. When this option is selected, the computer playback input channels (USB 5 – 10) will no longer be available in UC’s mixer and all ADAT signal routing must be done through Universal Control. In other words, ADAT will not pass if routed from a DAW.

OPOMBA:
Pri sample rates greater than 96 kHz, all digital inputs are disabled as well as Loopbacks 1 and 2.

Z univerzalnim nadzorom

• Quantum HD and Universal Control can be used without a DAW or any other software. Using Universal Control without a DAW provides access to all Quantum HD functionality and simplifies the use of Quantum HD’s digital mixing and monitoring when a DAW is not needed.

Imena gonilnikov Quantum I/O

• Each Quantum input and output has a channel number and name provided by the Quantum HD drivers on macOS and Windows. If an audio software application can access Core Audio / ASIO devices directly, it may be possible to designate specific inputs and/or outputs within the application.

Univerzalne nastavitve nadzora, ki se ohranijo po ciklu napajanja

• All currently active Main Mix settings (channel volume level, pan position, solo, mute, and stereo link) and monitor settings (main and headphone output levels) are saved to internal firmware before your Quantum HD are powered down, and recalled when power
  is reapplied.

Opomba:
Spremembe se ne shranijo takoj. Pred izklopom počakajte do 10 sekund, da se nastavitve shranijo v napravo.

Z DAW (brez univerzalnega nadzora)

• Ko se uporablja z DAW, vendar brez aplikacije Universal Control, DAW nadzoruje vse V/I usmerjanje signalov in spremljanje programske opreme.

Spremljanje z DAW

• Primarna funkcija Universal Control je spremljanje vnosov Quantum med nastopom v živo. Ko je nadzor programske opreme omogočen v DAW, mora biti nadzor vhoda Universal Control onemogočen, da se odpravijo podvojeni signali.
• Make sure to disable input monitoring in Universal Control when software monitoring via the DAW. If Universal Control’s input monitoring isn’t disabled (muted channel, fader down, or bypassed mixer), phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Kako onemogočiti nadzor vnosa v Universal Control

• Če želite onemogočiti vhodni nadzor v univerzalnem nadzoru, ko uporabljate programsko spremljanje v DAW, odprite univerzalni nadzor in utišajte vse vhodne kanale v univerzalnem nadzoru ali aktivirajte »Bypass Mixer« v nastavitvah. Universal Control se lahko nato zapre.
• Uporaba DAW brez univerzalnega nadzora je tipičen potek dela med mešanjem, kjer ni potreben nadzor z nizko zakasnitvijo in zakasnitev medpomnilnika ni težava, ker so skladbe že posnete. Pri snemanju novih skladb priporočamo DAW in potek dela Universal Control (kot je opisano v naslednjem razdelku).
• V tem scenariju Quantum deluje kot zvočni vmesnik. DAW dostopa in usmerja V/I zvočnega vmesnika Quantum prek gonilnikov naprav. Zakasnitev zvočnega V/I je določena z nastavitvijo Velikost medpomnilnika V/I.

Z DAW (z univerzalnim nadzorom)

• Universal Control se uporablja sočasno z DAW, ko je zaželeno spremljanje z nizko zakasnitvijo. Ta potek dela popolnoma odpravi zakasnitve medpomnilnika V/I, povezane z nadzorom programske opreme. V tem scenariju se univerzalni nadzor uporablja za nadzor celotnega nadzora vhoda med snemanjem, funkcija spremljanja programske opreme DAW pa mora biti onemogočena.

Spremljanje programske opreme v primerjavi s spremljanjem strojne opreme

• Spremljanje programske opreme (poslušanje vnosov v živo prek mešalnika DAW) ima opazno zakasnitev zaradi medpomnilnika V/I zvočnega vmesnika. Spremljanje strojne opreme prek notranjega mešalnika DSP zvočnega vmesnika (npr. aplikacije Universal Control) nima opazne zakasnitve, ker je zvok v živo interno usmerjen neposredno od vhodov do izhodov brez medpomnilnika DAW I/O.

Spremljanje z univerzalnim nadzorom

• Primarna funkcija Universal Control je spremljanje vnosov Quantum med nastopom v živo. Ko se uporablja z DAW, se Universal Control uporablja kot nadzorni mešalnik, ki deluje ločeno od programskega nadzornega mešalnika DAW.
• Make sure to disable Software Monitoring in the DAW when using Universal Control. When Universal Control is used for live input monitoring with a DAW, the DAW’s software monitoring feature should be disabled. If it isn’t, phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Povratna zanka
Quantum’s device drivers carry virtual (software only) input and output channels in addition to those directly associated with the hardware inputs and outputs. Loopback facilitates highly flexible signal routing via the DAW, without needing to reach behind the gear rack for manual cable patching. Additionally, since the loopback audio streams are in the digital domain, a pristine audio signal path is maintained without requiring additional A/D – D/A conversions. Loopback sends enable any input to be routed directly into Universal Control’s FlexChannel (see section 2.3.2 in this manual for more information).

Ponastavitev naprave
Če naletite na težave s svojim Quantumom in morate ponastaviti napravo, lahko ponastavite na privzete nastavitve naprave ali povrnete prejšnjo vdelano programsko opremo.

Privzete nastavitve naprave
Po potrebi lahko obnovite privzeti mešalnik (prejamp gain, output levels, etc.) and system settings (speaker switching modes, headphone mix sources, etc). To restore the default system settings:

• V Universal Control se pomaknite do Nastavitve (ikona zobnika)
• Pritisnite gumb "Factory Reset".
• Prikaže se potrditveno polje
• Izberite »Ponastavi« za potrditev ali »Prekliči« za preklic ponastavitve

Povrnitev na prejšnjo vdelano programsko opremo
Za vrnitev na prejšnjo vdelano programsko opremo:

1. Odstranite trenutno različico Universal Control
2. Namestite različico Universal Control, ki ima prejšnjo vdelano programsko opremo
3. Ko je Quantum vklopljen, odprite Universal Control in kliknite »Posodobi vdelano programsko opremo«.
4. V obvestilu bo navedeno, da je vaša vdelana programska oprema posodobljena in jo je treba vseeno posodobiti
5. Izberite »Vseeno posodobi« in sledite postopku

Opomba:
If your Quantum HD ever becomes unresponsive, press and hold the knob while powering on to enter firmware recovery mode.

Quantum Control from Fender Studio Pro
Your Quantum HD interface can be controlled directly from Fender Studio Pro (only compatible with version 6.6.1 or higher). After configuring the inputs and outputs of your interface within Fender Studio Pro, you’ll have easy control over various channel parameters, including channel Preamp Gain, Phantom Power, High Pass Filter, Auto Gain and Pad (HD only). To set up your Quantum Interface in Fender Studio Pro, follow the directions below. Once all cable connections are made and you have updated the Quantum’s firmware:

1. Launch Fender Studio Pro.
2. Navigate to Studio Pro/Options/Audio Setup/Audio Device (macOS: Preferences/Audio Setup/Audio Device) to open the Audio Device settings window.
3. Izberite Quantum kot napravo za predvajanje in snemanje.
4. Po želji konfigurirajte katero koli drugo zvočno napravo ali nastavitve obdelave.
5. Kliknite OK.

V/I nastavitev

• Before creating your first song, it’s recommended that you first configure your Quantum Interface for input and output routing in Fender Studio Pro.
• To route Inputs and Outputs, go to Fender Studio Pro Preferences, then select “Audio Setup”. In the bottom left corner, select “Song Setup” to enter the Audio I/O Setup tab.

Dodeljevanje V/I strojne opreme programskim V/I kanalom

• Vhodi in izhodi strojne opreme so dodeljeni programskim V/I kanalom v matričnem usmerjevalniku, ki je vizualna predstavitev usmerjanja. Programski kanali (mono in stereo) imajo vodoravno vrstico, vhodi in izhodi strojne opreme pa navpične stolpce. Točke, na katerih se te vrstice in stolpci sekajo, predstavljajo potencialne povezave ali poti med V/I strojno opremo in V/I kanali programske opreme.
• By default, Fender Studio Pro creates three Input Channels: one stereo and two mono. These channels are labeled Input L+R (stereo), Input L (mono), and Input R (mono). By default, the stereo Input Channel receives input from the first stereo hardware input pair of your selected audio device. The two mono Channels receive input from the same stereo hardware input pair. The Output Channel is labeled Main Out (stereo) and is routed by default to the first stereo hardware output pair of your selected audio device.
• Če želite ustvariti pot med V/I kanali programske opreme in V/I strojne opreme, kliknite na prazen kvadrat na presečišču želenega vhoda ali izhoda strojne opreme in vhoda ali izhoda kanala programske opreme. Prikaže se barvni kvadrat z oznako M, L ali R, ki označuje, ali je pot mono pot (M) ali leva ali desna stran stereo poti (L ali R).
• Opomba: Pri višjih sample rates, the number of available ADAT Inputs and outputs is reduced for each port. At 88.2/96 kHz, only ADAT channels 1–8 are available, and all digital is disabled at sample stopnje višje od 96 kHz. Nerazpoložljivi kanali ADAT so označeni s poševnim besedilom na straneh Input, Output, Bus in Insert v I/O Setup.

Nastavitev kvantnega vhoda
From the Inputs tab, you can enable any or all of the inputs on your Fender Quantum audio interface that you’d like to have available. Use the “Add” button options below the matrix to add new inputs.

Integrirane funkcije Quantum

Nastavitev kvantnega izhoda
Če želite urediti izhodno usmerjanje, kliknite zavihek »Izhodi« in dodajte izhode z uporabo gumbov Dodaj pod matričnim usmerjevalnikom.

Privzeta nastavitev V/I naprave
We recommend that you create a default Audio I/O Setup that can be a starting point for all new Songs. This lets you immediately begin working on your new Song, with little or no preliminary setup. To do so, create software I/O channels for all of your audio device’s commonly used inputs and outputs and name them appropriately. Then, click on the “Make Default” button in the Audio I/O Setup menu, and a pop-up window appears to confirm that you wish to make the current I/O setup the default for new Songs. Click “Yes”, and from that point forward, all new Songs will be created with this audio I/O setup. You can always use the “Reset to Default” button to apply this configuration to a song.

Integrirane funkcije Quantum
Fender Studio Pro channel strips have integrated Quantum hardware controls built in when Quantum is selected as the Playback and Recording device in Studio One Pro. To access these control features, open the “Mix” console view from the Fender Studio Pro song page.

Funkcije za nadzor kanala
Funkcije za nadzor kanala bodo vdelane na vrh vsakega kanala.

• Prejamp Raven pridobitve. S tem kontrolnikom nastavite ojačanje (0 dB do +75 dB) za vaš mikrofon ali instrument.
• Raven linijskega vnosa. Če je signal linijskega nivoja povezan prek vrat TRS kombiniranega priključka, potem preamp nadzor ojačanja preklopi na nadzor nivoja linije (-12 dB do +12 dB).
• Pridobite vrednost. Prikaže absolutno vrednost za trenutni dobiček. Dvokliknite vrednost, da vnesete določeno vrednost.
• Visokoprepustni filter. Vključi/izklopi HPF pri 80 Hz z naklonom 12 dB na oktavo.
• Phantom Power (48V). Engages / disengages 48V phantom power for use with condenser microphones.
• Samodejno povečanje. Samodejno nastavi stopnjo ojačanja za izbrani kanal.
• Pad: Reduces the overall gain level for the channel by -20 dB (microphone only).

Additional Fender Studio Pro Resources

Quantum Hardware Output Controls
Fender Studio Pro has integrated Quantum hardware output controls built in when Quantum is selected as the Playback and Recording device in Fender Studio Pro.

• Headphone Source Selector. Select the source for the Headphone Output 1 or 2.
• Monitor. Izberite, katere zvočnike upravljate z gumbom.
• Dim. Zatemni glavni izhod za količino, nastavljeno v nastavitvah (privzeto je -10 dB).
• Mute. Utiša glavni izhod. Upoštevajte, da izklop zvoka ne vpliva na slušalke.
• Speaker Switching toggle. When Speaker Switching is active, it changes to either speaker set A or speaker set B.
• Preklapljanje zvočnikov. Izberite vedenje za preklop zvočnikov, ko pritisnete gumb za upravljanje monitorjev.

Opomba:
If you do not see either of these Quantum controls within Fender Studio Pro, make sure that the “Audio device controls” option is checked in the channel options:

Additional Fender Studio Pro Resources

• Operating instructions for Fender Studio Pro is beyond the scope of this Owner’s Manual, but Fender Studio Pro comes bundled with an array of demo and tutorial materials. For more detailed information about all of the available features in Fender Studio Pro, check out the Fender Studio Pro User Manual. You can access this manual at any time while Fender Studio Pro is open by navigating to Help/Fender Studio Pro User Manual or by pressing the F1 key on your keyboard.
• 311 CESSNA KROG
• CORONA, CALIF. 92878
• ZDA WWW.FENDER.COM
• ©2026 Fender Musical Instruments Corporation. All Rights Reserved. The Fender logo (plain and stylized) Fender Studio, and Fender Studio Pro are trademarks of FMIC. Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH.
  Druga imena izdelkov, omenjena tukaj, so lahko blagovne znamke svojih podjetij. Vse specifikacije se lahko spremenijo brez predhodnega obvestila.

pogosta vprašanja

Q: How do I reset my Quantum HD Series interface?

A: To reset your Quantum HD Series interface, navigate to the Device Reset option in Universal Control and follow the on-screen instructions.

Q: Can I use the Quantum HD Series without Universal Control?

A: Yes, you can use the Quantum HD Series with a DAW without Universal Control, but using Universal Control provides additional functionality and control over the interface.

Dokumenti / Viri

Fender Quantum HD Software [pdfUporabniški priročnik Quantum HD Software, Software

Reference

• Uporabniški priročnik