Einhell Original E-Case Storage Case Installation Guide

Einhell Original E-Case Storage Case

Specifikacije

Quick Setup & Use

1. Stack boxes: Place the top box onto the bottom box, aligning connection points.
2. Lock together: Lock the top box onto the bottom box using the integrated side clips, ensuring both sides are firmly latched.
3. Assemble lid and cover: Place the top lid onto the main body of the case.
4. Attach organizer cover: Align and attach the transparent top organizer cover to the hinge slots on the lid.
5. Lock cover: Press down and lock the transparent cover securely.
6. Open front panel (FlipFront): Locate the release handle, pull the front panel outward, continue pulling to disengage internal slides, then lower the front panel to its fully extended position to access the internal drawers or storage space.

Stacking the Modular E-Cases

Follow these steps to securely stack and lock multiple storage boxes together:

1. Place the top box directly onto the bottom box, aligning the connection points.
2. Secure the connection by locking the top box onto the bottom box using the integrated side clips.
3. Ensure both sides are firmly latched into the final stacked configuration.

Lid and Organizer Cover Assembly

Assemble the upper storage compartments and transparent protective cover using the steps below:

1. Place the top lid of the Einhell E-CASE-SYSTEM onto the main body of the case.
2. Align and attach the transparent top organizer cover to the designated hinge slots on the lid.
3. Press down and lock the transparent cover securely in place to protect small parts.

Odpiranje sprednje plošče

(FlipFront Access)The FlipFront system allows quick access to your tools without unstacking the boxes. Follow these steps to open the front compartment:

1. Locate the release handle situated on the front panel.
2. Pull the front panel gently outward and away from the case.
3. Continue pulling the front panel further out to disengage the internal slides.
4. Lower the front panel to its fully extended position to access the internal drawers or storage space.

Odpravljanje težav

• Front panel won’t extend: Verify you are pulling the front panel outward and continuing the pull to disengage the internal slides, then lower it fully to the extended position.
• Boxes don’t sit correctly when stacking: Re-align the top box connection points with the bottom box and re-lock using the integrated side clips, ensuring both sides are firmly latched in the final stacked configuration.
• Transparent organizer cover won’t stay secured: Re-check that the cover is aligned with the designated hinge slots and press down to lock it securely in place.