AudioThing 910-42 Echo Cube Effect Plugin User Guide

AudioThing 910-42 Echo Cube Effect Plugin User Guide

Echo Cube

Dual Acoustic Delay Line

Echo Cube is a dual delay plugin inspired by the Cooper Time Cube, a rare analog delay system that achieved echo without tape or electronic delay circuits scush as BBDs. The original unit created delay by sending audio through long coiled tubes, where time was defined by the physical propagation of sound through air.

Echo Cube recreates and expand this concept with two independent delay lines, A and B, each offering dedicated time, feedback, and level controls. Three models are available: Time Cube faithfully recreates the original hardware, while Vrtna cev in Valovita are experimental, DIY inspired variations designed for sound design, expanding on the physical principles of the original unit.

The delay lines can be combined using multiple routing modes, including serial, parallel, ping pong, mono sum, and mid side, allowing precise control over delay interaction and stereo image shaping.

Echo Cube is available for macOS, Windows, and Linux (VST, VST3, AU, AAX, CLAP).

It’s also available on the App Store for iOS and iPadOS (AUv3 and Standalone).

Namestitev

macOS

• Dvokliknite arhiv DMG, da ga ekstrahirate
• Z desno miškino tipko kliknite namestitveni program PKG in kliknite Odpri
• Sledite navodilom za namestitev vtičnikov

Windows

• Ekstrahirajte arhiv ZIP
• Dvokliknite na nastavitev file (.exe)
• Sledite navodilom za namestitev vtičnikov

Linux

• Extract the tarball archive
• Run ./install.sh
• Sledite navodilom za namestitev vtičnikov

Registracija

When you open the plugin for the first time, the activation window will appear automatically. If it does not appear, open it by clicking the ☰ icon next to the bypass button in the top right corner of the plugin.

Na spletu

• Če še niste ustvarili računa, lahko sign up here
• Enter your email and password and click Log In.

Brez povezave

• Prenesite licenco file od tvojega račun.
• Drag and drop the license file into the registration window, or click the offline license file label below Log In to select the license file.

Parametri

Mojster

Vnos: Sets the input gain before processing. Use it to optimize the signal level into the delays.
mešanica: Blends the processed signal with the dry input signal.
Izhod: Controls the final output level after processing. Useful for gain matching.

Model: Selects one of three physical delay models available:
● Time Cube, the original Time Cube design.
● Garden Hose, long flexible tubing similar to the Time Cube.
● Corrugated, corrugated plastic piping for cabling.
Highpass Applies a highpass filter to the input signal before the delays.
Vozi Adds soft saturation to the input signal.

Delays (A/B)
Obvoznica Enables or disables the delay channel.
Čas Sets the delay time for the line.
↳ Sync Synchronizes the delay time to the host tempo.
Povratne informacije Controls how much of the delayed signal is fed back into the delay line.
Higher values produce longer repeats and self oscillation.
Glasnost Sets the output level of the delay line before routing.

Dodatno (character controls)

Glavnik Adjusts the internal resonance of the delay line. This emphasizes or smooths harmonic buildup, simulating the classic comb filtering happening in the unit.

Hrup Adds background noise into the delay path. This recreates the instability and texture of physical delay systems.
↳ Env When the enabled, the noise follows the input signal: it only activates when audio is present.
Phase Inverts the polarity of the delay line output. This affects how the two delay lines interact, especially in parallel, mid/side, and feedback heavy setups.

Usmerjanje

Pretok signala
Shows the current signal flow between delay lines A and B and the stereo channels. Five modes are available:

• Serial, chains lines A and B together to create longer delay times and more complex repeats.
• Parallel, lines A and B process the input signal independently. Their outputs are mixed together at the end.
• Ping Pong, Routes the left channel into delay line A and the right channel into delay line B, then cross feeds the outputs back to the opposite channels.
• Mono Sum, the input signal is summed to mono before entering the delay lines, then processed through the serial routing path.
• Mid/Side, splits the input into mid and side components, processes them separately through delay lines A and B, then converts the signal back to stereo.

Send When disabled, no new signal enters the delay lines, but existing feedback continues to be heard until it naturally decays.
Direct Controls whether the dry signal is passed directly to the output. Useful for creating wet only delay effects. Independent of the Mix parameter.
Mehka sponka Enables a soft clipping stage on the delay output. This limits peaks in a smooth way and helps keep feedback under control at extreme settings.

Lastnosti

Zaklepanje parametrov

Če želite obdržati vrednost enega ali več parametrov med spreminjanjem prednastavitev ali pri uporabi gumba za naključni naključni parameter, lahko uporabite funkcijo zaklepanja parametrov.
Z desno miškino tipko kliknite parameter in izberite Zaklepanje parametrov.

Edit Value

You can also manually change the value for knobs and sliders. Right click on a parameter and choose Edit Value. You can also access this feature with SHIFT + Click.

By clicking on the icon ☰ you can access additional features.

Velikost okna

Velikost okna vtičnika lahko spremenite s tremi vnaprej določenimi velikostmi (majhna, standardna, velika). Velikost okna vtičnika lahko spremenite tudi tako, da kliknete in povlečete spodnji desni kot vmesnika. Dvojni klik se ponastavi na standardno velikost.

Preset Copy / Paste

Prednastavitve lahko preprosto delite s to funkcijo kopiranja/lepljenja.
Copy to Clipboard: The status of all parameters will be saved to the Clipboard
Paste from Clipboard: Load a preset from the Clipboard

Enable / Disable Notifications

Obvestila za posodobitve in novice lahko omogočite ali onemogočite (prikazano z ikono zvonca). Ta možnost je globalna in bo vplivala na vse AudioThing plugins.

Swap Mouse Buttons

If you are using the right button as your primary mouse button, the plugin might not recognize it. Use this option to enable it internally in the plugin.
This option is global and it will affect all AudioThing plugins.

GUI Acceleration

You can enable or disable the GUI acceleration supported by your system.
The current and default library is OpenGL.

Graphics Controls

This feature allows you to modify the User Interface’s Brightness and Contrast.

Konec

Where is everything?

Instalater bo postavil plugins, prednastavitve in drugi podatki v teh mapah.

macOS
AU: /Knjižnica/Avdio/Plug-ins/Components/
VST: /Library/Audio/Plug-ins/VST/
VST3: /Library/Audio/Plug-ins/VST3/
PLOK: /Library/Audio/Plug-ins/CLAP/
AAX: /Knjižnica/Podpora za aplikacije/Avid/Audio/Plug-Ins/
podatki: /Users/Shared/AudioThing/

Windows
VST: custom path from the installer
VST3: \Časovni razpored Files\Skupno Files\VST3\
PLOK: \Časovni razpored Files\Skupno Files\CLAP\
AAX: \Časovni razpored Files\Skupno Files\Avid\Audio\Plug-Ins\
podatki: \Users\Public\Public Documents\AudioThing\

Krediti
DSP & Code Carlo Castellano
oblikovanjen John Gordon
QA David

EULA
Prosim obiščite www.audiothing.net/eula/ na ponovnoview this product’s EULA.

Hvala
Zahvaljujemo se vam za nakup! Upamo, da se boste z njegovo uporabo tako zabavali, kot smo jo imeli pri izdelavi tega izdelka.
Za podporo obiščite www.audiothing.net/support/
For further help or any questions, please contact us here: www.audiothing.net/contact/

Sledite nam

https://www.audiothing.net/
https://www.instagram.com/audiothing/
https://bsky.app/profile/audiothing.net
https://www.youtube.com/@audiothing