AtomStack F03-0329-0AA1 Swift

Specifikacije

• Ime izdelka: AtomStack Swift
• Številka modela: F03-0329-0AA1
• Različica: B
• Vhodna moč: DC 24V
• Pristanišča: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Indikator stanja: Solid blue when working

Navodila za uporabo izdelka

Seznam delov:

• Montaža osi X
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Napajalnik
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Seznam delov

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Opomba: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Opomba:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Metoda ostrenja:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Nasvet:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Metoda prenosa računalniške programske opreme:
Povezava za prenos programa AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Skeniraj za prenos

Viri programske opreme

LightBurn
Unofficial software. Requires a separate purchase

Način prenosa programske opreme Lightburn: Povezava za prenos: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Odprite programsko opremo LightBurn in izberite: Naprave – Uvozi
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Opomba: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Uporabniški priročnik

Kontaktirajte nas

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Odpravljanje težav
• Vzdrževanje

Storitev za stranke:

• For the detailed warranty policy, please visit our official webspletno mesto: www.atomstack.com
• Za tehnično podporo in storitve pošljite e-pošto: support@atomstack.com

Proizvajalec:
Shenzhen AtomStack Technologies Co., Ltd.

Poštna številka: 518172

Naslov:
17. nadstropje, stavba 3A, faza II, Inteligentni park, št. 76, avenija Baohe, ulica Baolong, okrožje Longgang, Shenzhen, Guangdong, Kitajska.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

pogosta vprašanja

Kaj naj storim, če med namestitvijo naletim na težave?

If you face any difficulties during installation, refer to the video tutorial available on the official webali se za pomoč obrnite na podporo strankam.

Dokumenti / Viri

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdfUporabniški priročnik F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Reference

• Uporabniški priročnik