Hover-1 All-Star 2.0

Uporabniški priročnik za samouravnoteževalni skuter Hover-1 All-Star 2.0

Model: All-Star 2.0

Uvod

Hvala za nakupasing the Hover-1 All-Star 2.0 Self Balancing Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience. Retain this manual for future reference.

Varnostne informacije

Operating any electric vehicle carries inherent risks. To minimize these risks, it is crucial to follow all instructions and warnings in this manual. Failure to do so may result in property damage, serious injury, or death.

Vsebina paketa

Ob razpakiranju se prepričajte, da so vsi predmeti prisotni in v dobrem stanju:

Konec izdelkaview

Familiarize yourself with the components of your Hover-1 All-Star 2.0 scooter.

Hover-1 All-Star 2.0 Self Balancing Scooter

Image: The Hover-1 All-Star 2.0 Self Balancing Scooter, black in color, featuring LED lights on the wheels and footpads. This image displays the overall design and illuminated elements of the scooter.

Polnjenje naprave

Before your first ride, fully charge the scooter for approximately 5 hours. Always use the provided charging adapter.

  1. Prepričajte se, da je skuter izklopljen.
  2. Poiščite priključek za polnjenje na skuterju.
  3. Connect the charging adapter to the scooter's charging port.
  4. Priključite polnilni adapter v standardno stensko vtičnico.
  5. Indikatorska lučka na polnilniku med polnjenjem običajno sveti rdeče, ko je popolnoma napolnjena, pa zeleno.
  6. Once fully charged, disconnect the charger from the scooter and the wall outlet.

Pomembno: Do not leave the scooter charging unattended for extended periods. The built-in 36V/2.0 Ah Lithium-ion battery is certified, and its safety shield enclosure helps prevent overheating.

Nastavitev

No complex assembly is required. After charging, your Hover-1 All-Star 2.0 is ready for initial setup and calibration.

  1. Vklop: Pritisnite gumb za vklop, da vklopite skuter.
  2. Calibration (if needed): If the scooter does not seem balanced or drifts, it may need calibration.
    • Skuter postavite na ravno, vodoravno površino.
    • Prepričajte se, da je skuter izklopljen.
    • Press and hold the power button for approximately 10-15 seconds until the lights flash.
    • Release the button and power off the scooter.
    • Power on again to complete calibration.

Navodila za uporabo

The Hover-1 All-Star 2.0 uses a dynamic stabilization system with gyroscopes and acceleration sensors for intuitive control.

Person riding Hover-1 All-Star 2.0 Self Balancing Scooter

Image: A person riding a Hover-1 self-balancing scooter outdoors, demonstrating typical use. This image illustrates the user in motion on the device.

  1. Montaža:
    • Place one foot firmly on a footpad. The scooter will stabilize itself.
    • Quickly step up with your other foot onto the second footpad.
    • Maintain a relaxed, upright posture with a slight bend in your knees.
  2. Moving Forward/Backward:
    • Nagnite se rahlo naprej, da se premaknete naprej.
    • Lean slightly backward to move backward.
    • The amount of lean determines your speed.
  3. Struženje:
    • To turn left, press your right foot forward slightly and your left foot backward slightly.
    • To turn right, press your left foot forward slightly and your right foot backward slightly.
  4. Ustavljanje:
    • Za upočasnitev in zaustavitev se vrnite v pokončen, nevtralen položaj.
    • To dismount, step off one foot at a time, preferably backward.

Practice in a safe, open area until you are comfortable with the controls. The scooter can reach speeds up to 7 mph and has a range of up to 7 miles.

Bluetooth zvočnik

Your Hover-1 All-Star 2.0 features a built-in Bluetooth speaker for audio playback.

  1. Prepričajte se, da je skuter vklopljen.
  2. Omogočite Bluetooth na mobilni napravi.
  3. Iskanje "Hover-1" or a similar device name in your device's Bluetooth settings.
  4. Select the scooter to pair. You may hear an audible confirmation.
  5. Once paired, you can play audio from your device through the scooter's speaker.

Note: The Bluetooth speaker has a limited range. Keep your paired device close to the scooter for optimal performance.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega skuterja.

Odpravljanje težav

If you encounter issues with your Hover-1 All-Star 2.0, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Skuter se ne vklopi.Prazna baterija; gumb za vklop ni pravilno pritisnjen.Charge the scooter fully. Ensure the power button is pressed firmly.
Scooter not charging or charger light stays green.Polnilnik ni pravilno priključen; okvarjen polnilnik ali baterija.Ensure charger is securely connected to both scooter and outlet. Try a different outlet. If problem persists, contact customer support.
Scooter is unbalanced or drifts.Potrebna je kalibracija.Perform the calibration steps outlined in the "Setup" section.
Zvočnik Bluetooth se ne povezuje.Bluetooth not enabled on device; scooter not in pairing mode; out of range.Ensure scooter is on and Bluetooth is enabled on your device. Keep device close to scooter. Restart both devices if necessary.

If these steps do not resolve the issue, please contact Hover-1 customer support.

Specifikacije

Garancija in podpora

The Hover-1 All-Star 2.0 Self Balancing Scooter comes with a 90 dnevna garancija from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

For warranty claims, technical support, or further assistance, please contact Hover-1 customer service. Keep your proof of purchase for warranty validation.

Proizvajalec: Skupina DGL

Povezani dokumenti - All-Star 2.0

Prejview Navodila za uporabo lebdeče deske Hover-1 All-Star 2.0
Obsežen priročnik za uporabo lebdeče deske Hover-1 All-Star 2.0, ki zajema varnost, načela delovanja, kontrole, delovanje Bluetooth zvočnika, nasvete za vožnjo, vzdrževanje in odpravljanje težav.
Prejview Navodila za uporabo Hover-1 All-Star 2.0
Ta navodila za uporabo vsebujejo obsežna navodila in varnostne smernice za električni skuter Hover-1 All-Star 2.0. Spoznajte njegove funkcije, načela delovanja, specifikacije, upravljalne elemente in vzdrževanje, da zagotovite varno in prijetno uporabo.
Prejview Navodila za uporabo Hover-1 ALL-STAR 2.0
Obsežen priročnik za uporabo električnega skuterja Hover-1 ALL-STAR 2.0, ki zajema varnost, funkcije, načela delovanja in vzdrževanje.
Prejview Navodila za uporabo lebdeče deske Hover-1 Sypher: Varnost, delovanje in vzdrževanje
Obsežen priročnik za uporabo lebdeče deske Hover-1 Sypher (DSA-SYP). Spoznajte varnostne ukrepe, tehnike vožnje, specifikacije, upravljanje, funkcije Bluetooth, integracijo aplikacij, polnjenje, nego baterije in vzdrževanje.
Prejview Hover-1 Blast: Pomembne informacije in vodnik za kalibracijo
Bistvene informacije za vaš Hover-1 Blast, vključno z lokacijo serijske številke, indikatorji polnjenja in navodili za kalibracijo za zagotovitev nemotenega delovanja. Za podporo obiščite hover-1.com.
Prejview Navodila za uporabo in varnostna navodila za električni skuter Hover-1 Blast
Celovit priročnik za uporabo in varnostni vodnik za električni skuter Hover-1 Blast, ki zajema funkcije, načela delovanja, varnostne ukrepe, navodila za vožnjo, polnjenje, vzdrževanje in odpravljanje težav.