TOMZN TOQ6-63PV Din Rail Automatic Transfer Switch User Manual

1. Uvod

This manual provides essential information for the safe and effective installation, operation, and maintenance of your TOMZN TOQ6-63PV Din Rail Automatic Transfer Switch. This device is designed to automatically switch between two power sources, such as city power and a PV (photovoltaic) grid-connected system, ensuring an uninterrupted power supply for critical loads. Please read this manual thoroughly before installation and operation.

Slika 1: Spredaj view of the TOMZN TOQ6-63PV Automatic Transfer Switch.

2. Varnostne informacije

OPOZORILO: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Failure to follow these instructions may result in serious injury or death.

• Always disconnect all power sources before installing or servicing the device.
• Zagotovite ustrezno ozemljitev v skladu z lokalnimi električnimi predpisi.
• Verify that the input power supply is connected in the correct phase sequence. Incorrect phasing can damage the device or connected equipment.
• Do not operate the switch if it appears damaged.
• Med namestitvijo uporabljajte ustrezno osebno zaščitno opremo (OZO).

3. Značilnosti izdelka

The TOMZN TOQ6-63PV Automatic Transfer Switch offers robust performance and safety features:

• Overload and Short-Circuit Protection: Designed to prevent damage to connected systems from electrical faults.
• Vzdržljiva konstrukcija: Made with insulating, flame-retardant, and UV-resistant materials for long-term reliability, especially in outdoor or solar installations.
• Varne povezave: Features screw-type terminals to ensure stable and secure electrical connections.
• Vsestranska uporaba: Suitable for use with solar inverters, charge controllers, and battery banks, providing seamless power transfer.
• Automatic and Manual Operation: Allows for flexible control over power source selection.

4. Specifikacije

Key technical specifications for the TOMZN TOQ6-63PV Automatic Transfer Switch:

Figure 2: Detailed specifications visible on the device label.

5. Namestitev in ožičenje

The TOQ6-63PV is designed for Din Rail mounting. Follow these steps for safe and correct installation:

1. Montaža: Securely attach the device to a standard 35mm Din Rail within an appropriate electrical enclosure.
2. Power Source 1 (City Power) Connection: Connect the main utility power supply to the terminals labeled "City Power" (N2|A2). Ensure correct L (Live) and N (Neutral) connections.
3. Power Source 2 (PV Grid-connected) Connection: Connect the PV grid-connected power supply to the terminals labeled "PV Grid-connected" (N1|A1). Ensure correct L (Live) and N (Neutral) connections.
4. Povezava obremenitve: Connect the electrical load (devices to be powered) to the "LOAD" terminals at the bottom of the switch.
5. Zaporedje faz: POMEMBNO: The input power supply must be connected in the correct phase sequence. Refer to the diagram on the device for guidance.
6. Tighten Terminals: Use a screwdriver to securely tighten all screw-type terminals to prevent loose connections and potential arcing. Recommended torque: 2.5 N·m.

Slika 3: Pod kotom view illustrating connection points.

Slika 4: Zadaj view with Din Rail mounting details.

6. Delovanje

The TOQ6-63PV offers both automatic and manual operation modes.

6.1. Načini delovanja

• Samodejni način: When the selector switch is set to "Auto", the device will automatically detect the presence and quality of both power sources (City Power and PV Grid-connected) and switch to the preferred or available source. Typically, it prioritizes one source (e.g., PV) and switches to the other (e.g., City Power) if the primary source fails or is out of specification.
• Ročni način: When the selector switch is set to "Manual", you can manually select the desired power source using the toggle switch (I or II).
  • Položaj I: Selects Power Source 1 (PV Grid-connected).
  • Položaj II: Selects Power Source 2 (City Power).

6.2. Indikatorske lučke

• IU (Red LED): Indicates the status of Power Source 1 (PV Grid-connected). Lit when Power Source 1 is active.
• IIU (Green LED): Indicates the status of Power Source 2 (City Power). Lit when Power Source 2 is active.
• Load ON (Red LED): Indicates that power is being supplied to the load. Lit when the load is receiving power from either source.

Figure 5: Control switches and indicator lights.

7. Vzdrževanje

The TOMZN TOQ6-63PV is designed for minimal maintenance. However, periodic checks are recommended:

• Vizualni pregled: Annually inspect the device for any signs of physical damage, discoloration, or loose connections.
• Tesnost terminala: Periodically check and re-tighten all terminal screws to ensure secure electrical contact.
• Čiščenje: If necessary, gently clean the exterior of the device with a dry, soft cloth. Do not use liquids or abrasive cleaners.
• Okoljski pogoji: Ensure the operating environment remains within specified temperature and humidity ranges to prolong device life.

8. Odpravljanje težav

If you encounter issues with your TOQ6-63PV, consider the following common troubleshooting steps:

• Ni napajanja za nalaganje:
  • Check if both input power sources (City Power, PV Grid-connected) are active and their respective indicator lights (IU, IIU) are lit.
  • Ensure the device is in "Auto" mode or manually switched to an active source in "Manual" mode.
  • Preverite, ali so vse ožičene povezave varne in pravilne.
  • Check for tripped circuit breakers upstream of the ATS.
• Device Not Switching Automatically:
  • Confirm the selector switch is firmly in the "Auto" position.
  • Check the status of both input power sources. The automatic transfer relies on the availability of both sources.
  • Zagotovite nadzorni volumentage (220V~) is present and stable.
• Overheating/Unusual Odors:
  • Immediately disconnect power to the device.
  • This indicates a serious fault. Do not attempt to operate the device. Contact a qualified electrician.

For issues not resolved by these steps, consult a qualified electrician or contact TOMZN customer support.

9. Garancija in podpora

This product is manufactured by TOMZN ELECTRIC CO.,LTD. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.