X-PRO 4000W 60V 27AH Electric Dirt Bike User Manual

Uvod

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 4000W 60V 27AH Electric Dirt Bike (Model DB-E02). Please read this manual thoroughly before initial use and retain it for future reference. This vehicle is designed for off-road use only.

Image: X-PRO E02 4000W Electric Dirt Bike being ridden on a dirt path.

Varnostne informacije

Always prioritize safety when operating the electric dirt bike. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.

• Wear appropriate safety gear, including a helmet, gloves, and protective clothing.
• Pred vsako vožnjo se prepričajte, da so vse komponente varno pritrjene.
• Ne upravljajte kolesa pod vplivom alkohola ali drog.
• Familiarize yourself with local regulations regarding electric dirt bike use.
• This vehicle is intended for off-road use only and cannot be officially registered for any purpose.

Postavitev in montaža

Your X-PRO Electric Dirt Bike requires some assembly. Follow these steps carefully. Refer to the assembly video for visual guidance.

Razpakiranje in začetni pregled

1. Carefully open the shipping carton.
2. Remove the outer cardboard box and metal frame.
3. Locate the accessory box containing tools and small parts.
4. Remove all protective packaging and zip ties from the bike components.

Namestitev krmila

1. Position the handlebars into the clamps on the fork.
2. Ensure the display and control buttons are correctly oriented.
3. Secure the handlebars using the provided bolts and Allen wrench. Tighten evenly.

Image: Close-up of the X-PRO Electric Dirt Bike handlebars with the display and controls mounted.

Namestitev sprednjega kolesa

1. Remove the protective spacer from the front brake caliper.
2. Align the brake rotor with the brake caliper.
3. Insert the front axle through the wheel hub and fork.
4. Secure the axle with the washers and nuts, tightening them firmly with the provided wrenches.

Image: The front wheel of the X-PRO Electric Dirt Bike, highlighting the 19-inch tire and disc brake system.

Namestitev zadnjega blatnika

1. Attach the rear fender to the designated mounting points on the frame.
2. Use the provided screws and Allen wrench to secure it.

Headlight Cover Installation

1. Position the headlight cover over the front LED light assembly.
2. Align the mounting holes and secure with the provided screws.

Slika: spredaj view of the X-PRO Electric Dirt Bike, showcasing the dual LED headlight.

Navodila za uporabo

Pred vožnjo se seznanite s kontrolami in funkcijami.

Vklop/izklop

• To power on the bike, press and hold the power button on the handlebar control panel. The display will illuminate.
• Za izklop ponovno pritisnite in držite gumb za vklop, dokler se zaslon ne izklopi.

Načini hitrosti

The bike features 3 safe speed modes:

• 1. prestava: Approximately 15 mph (25 km/h) for a relaxed pace.
• 2. prestava: Approximately 22 mph (35 km/h) for balanced performance.
• 3. prestava: Approximately 34 mph (55 km/h) for higher speed.

Use the '+' and '-' buttons on the control panel to switch between speed modes.

Headlight and Taillight Operation

• Press the headlight button on the control panel to turn the front LED headlight on or off.
• The rear taillight operates in conjunction with the headlight.

Rog

Press the green horn button on the left handlebar to activate the horn.

Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your electric dirt bike.

• Tlak v pnevmatikah: Pred vsako vožnjo preverite tlak v pnevmatikah. Za optimalno delovanje in varnost vzdržujte priporočeni tlak v pnevmatikah (PSI).
• Zavore: Regularly inspect brake pads and rotors for wear. Ensure brake levers operate smoothly and provide adequate stopping power.
• Veriga: Verigo vzdržujte čisto in naoljeno, da preprečite rjavenje in zagotovite nemoteno delovanje.
• Vzdrževanje baterije: Charge the 60V 27AH lithium battery fully after each use. Avoid completely draining the battery. Store the bike in a cool, dry place when not in use. Charging time is approximately 5 hours.
• Generalno čiščenje: Kolo redno čistite z oglasomamp krpo. Izogibajte se neposrednemu čiščenju električnih komponent z visokotlačnim vodnim curkom.

Odpravljanje težav

If you encounter issues with your X-PRO Electric Dirt Bike, refer to these common solutions. For persistent problems, contact customer support.

• Bike does not power on: Ensure the battery is fully charged and properly connected. Check all electrical connections.
• Motor se ne vklopi: Verify the power is on and the correct speed mode is selected. Check for any error codes on the display.
• Zavore so šibke: Inspect brake pads for wear and ensure hydraulic fluid levels are adequate (if applicable). Adjust brake tension if necessary.
• Nenavadni zvoki: Stop riding immediately and inspect the bike for loose parts, chain issues, or foreign objects.

Specifikacije

Image: Diagram illustrating the dimensions and weight specifications of the X-PRO Electric Dirt Bike.

Garancija in podpora

Your X-PRO Electric Dirt Bike comes with a 1-month warranty. For any questions, technical assistance, or parts inquiries, please visit the X-PRO Store ali se obrnite na službo za pomoč strankam.