1. Izdelek je končanview
The Cecotec Bolero Flux TLT 604400 is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. It features a sleek black glass front and a stainless steel body, combining modern aesthetics with durability. This model boasts an A+++ energy rating and a powerful DC motor, ensuring high performance with low energy consumption.
Key features include a suction capacity of 431.2 m³/h, an invisible touch control panel, and innovative Hand Movement Control for adjusting settings without direct contact. It offers 3 speed levels plus a Booster function for intensive extraction, and integrated LED lighting for optimal illumination of your cooking area. The hood is equipped with 5-layer washable aluminum filters and includes carbon filters for recirculation mode.
Slika 1.1: Spredaj view of the Cecotec Bolero Flux TLT 604400 Extractor Hood, highlighting its sleek design and control panel.
Slika 1.2: The 60cm design of the extractor hood, emphasizing its elegant black glass and stainless steel construction.
2. Varnostne informacije
Pred namestitvijo in uporabo natančno preberite vsa varnostna navodila. Ta priročnik shranite za poznejšo uporabo.
- Električna varnost: Prepričajte se, da napajalnik ustreza voltage specified on the rating plate. The appliance must be properly grounded. Do not pull the power cord to disconnect from the mains.
- Namestitev: Installation must be performed by a qualified technician in accordance with local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation guide.
- Prezračevanje: Zagotovite ustrezno prezračevanje prostora, ko napo uporabljate hkrati s plinskimi ali drugimi napravami na gorivo.
- Čiščenje: Regularly clean the hood and filters to prevent grease accumulation, which can pose a fire hazard. Do not flambé under the hood.
- Otroci in ranljive osebe: To napravo lahko uporabljajo otroci, stari 8 let in več, ter osebe z zmanjšanimi fizičnimi, senzoričnimi ali duševnimi sposobnostmi ali s pomanjkanjem izkušenj in znanja, če so pod nadzorom ali so jim poučeni o varni uporabi naprave in razumejo nevarnosti, ki so povezane s tem. . Otroci se ne smejo igrati z aparatom. Čiščenja in uporabniškega vzdrževanja ne smejo izvajati otroci brez nadzora.
- Vzdrževanje: Naprave ne poskušajte popravljati ali spreminjati sami. Za vsa popravila se obrnite na pooblaščeno servisno osebje.
3. Priložene komponente
Po razpakiranju preverite, ali so vse komponente prisotne in nepoškodovane:
- 1 x Cecotec Bolero Flux TLT 604400 Telescopic Extractor Hood
- 1 x Uporabniški priročnik (ta dokument)
- 2 x Carbon Filters (not pre-installed, for recirculation mode)
- Installation hardware (screws, wall plugs, etc. - specific items may vary)
4. Nastavitev in namestitev
Proper installation is crucial for the safe and efficient operation of your extractor hood. It can be installed in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).
4.1. Preverjanja pred namestitvijo
- Ensure the installation area has sufficient space and structural support.
- Verify the electrical supply is compatible with the hood's requirements (220 Volts).
- If using extraction mode, ensure a suitable ducting route to the outside.
- If using recirculation mode, ensure the carbon filters are installed (see Maintenance section).
4.2. Montaža nape
- Measure and mark the drilling points on the wall or cabinet according to the provided template in the full installation guide.
- Izvrtajte luknje in vstavite stenske vložke.
- Secure the mounting bracket or hood to the wall/cabinet using the appropriate screws.
- Connect the ducting (if in extraction mode) or ensure the recirculation outlet is clear.
- Priključite napo na električno napajanje.
Slika 4.1: Dimensional diagram of the extractor hood, crucial for accurate installation planning.
5. Delovanje
Your Cecotec Bolero Flux TLT 604400 extractor hood offers intuitive control options for a seamless cooking experience.
5.1. Control Panel (Invisible Touch Control)
The hood features an invisible touch control panel that becomes visible when the hood is active. When off, it blends seamlessly with the black glass front.
Slika 5.1: The invisible touch control panel, showing power, speed, and light controls.
- Gumb za vklop: Press to turn the hood on/off.
- Izbira hitrosti: Cycle through 3 extraction speeds (Low, Medium, High) to suit your cooking needs.
- Funkcija pospeševalnika: Activate for maximum extraction power during intense cooking. This function typically runs for a set period before returning to the previous speed.
- Svetlobni gumb: Turn the integrated LED lighting on/off.
5.2. Hand Movement Control
For enhanced hygiene and convenience, the hood can be operated using hand gestures.
Slika 5.2: Demonstrating the Hand Movement Control feature for adjusting extraction speed.
- Povečanje hitrosti: Wave your hand from left to right in front of the sensor.
- Zmanjšaj hitrost: Wave your hand from right to left in front of the sensor.
- Refer to the full manual for precise sensor location and gesture recognition.
5.3. Extraction Performance and Lighting
Slika 5.3: Visual representation of the hood's powerful 431.2 m³/h suction, ensuring a smoke-free kitchen.
Slika 5.4: The integrated LED lighting provides clear and energy-efficient illumination for your cooking zone.
6. Vzdrževanje
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your extractor hood.
6.1. Cleaning Aluminum Grease Filters
The 5-layer aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain suction efficiency.
Slika 6.1: Illustration of the 5-layer aluminum filter, designed to capture grease effectively.
- Izklopite in izključite napo iz električnega omrežja.
- Open the hood panel and release the filter latches. Carefully remove the aluminum filters.
- The filters are dishwasher-safe. Alternatively, wash them by hand using hot water and a mild detergent. Ensure they are completely dry before re-installing.
- Ponovno namestite filtre in se prepričajte, da so varno pritrjeni.
6.2. Replacing Carbon Filters (Recirculation Mode)
If your hood is operating in recirculation mode, the carbon filters absorb odors and should be replaced every 3-6 months, depending on usage.
Slika 6.2: Carbon filters, essential for improving air quality in recirculation mode.
- Izklopite in izključite napo iz električnega omrežja.
- Odstranite aluminijaste maščobne filtre, kot je opisano zgoraj.
- Locate the carbon filters (usually attached to the motor housing). Remove the old carbon filters by twisting or unlatching them.
- Namestite nove ogljikove filtre in se prepričajte, da so varno pritrjeni.
- Ponovno namestite aluminijaste filtre za maščobe.
6.3. Zunanje čiščenje
Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the stainless steel or glass finish.
7. Odpravljanje težav
Preden se obrnete na podporo strankam, si oglejte naslednje pogoste težave in rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Napa se ne vklopi | No power supply; Power cord not plugged in; Fuse blown; Control panel malfunction. | Check power connection; Check circuit breaker/fuse box; Contact qualified technician if issue persists. |
| Nizka sesalna moč | Grease filters clogged; Carbon filters saturated (recirculation mode); Ducting obstructed; Incorrect installation distance from hob. | Clean aluminum filters; Replace carbon filters; Check ducting for obstructions; Verify installation height. |
| Prevelik hrup | Loose components; Improper installation; Obstruction in fan; Motor issue. | Check for loose screws or parts; Ensure correct installation; Inspect fan for foreign objects; Contact service if motor noise is unusual. |
| Luči ne delujejo | Okvara LED žarnice; Težava z električno povezavo. | Check if lights are properly connected; Replace LED bulbs if necessary (consult manual for type); Contact service. |
| Hand Movement Control unresponsive | Sensor obstructed or dirty; Incorrect gesture. | Clean the sensor area; Ensure clear path for gestures; Refer to operation section for correct gestures. |
8. Specifikacije
Detailed technical specifications for the Cecotec Bolero Flux TLT 604400 Extractor Hood:
| Funkcija | Podrobnost |
|---|---|
| Številka modela | A01_EU01_110282 |
| Znamka | Cecotec |
| Dimenzije izdelka | 60 x 22 x 46.3 cm (dolžina x širina x višina) |
| Teža | 5.99 kg |
| barva | Črna |
| Sesalna zmogljivost | 431.2 m³/h |
| Energijski razred | A+++ |
| Vrsta motorja | DC motor |
| Vrsta nadzora | Invisible Touch Control, Hand Movement Control |
| Stopnje hitrosti | 3 speeds + Booster function |
| Razsvetljava | Vgrajena LED lučka |
| Filtri | 5-layer washable aluminum filters, Carbon filters included (for recirculation) |
| Nivo hrupa | 62 decibelov |
| voltage | 220 volta |
| Država izvora | Španija |
9. Garancija in podpora
Cecotec je zavezan k zagotavljanju visokokakovostnih izdelkov in zadovoljstvu strank.
9.1. Razpoložljivost rezervnih delov
Spare parts for this appliance are guaranteed to be available for a duration of 10 leti within the EU, ensuring long-term usability and repairability.
9.2. Podpora strankam
For technical assistance, warranty claims, or to purchase spare parts, please contact Cecotec customer service through their official website or the contact information provided with your purchase documentation. When contacting support, please have your model number (TLT 604400 or A01_EU01_110282) and purchase date ready.
