EMOS TSS910A

EMOS TSS910A Photoelectric Smoke Detector User Manual

Model: TSS910A

1. Uvod

Thank you for choosing the EMOS TSS910A Photoelectric Smoke Detector. This manual provides essential information for the safe and effective installation, operation, and maintenance of your smoke detector. Please read these instructions carefully before use and retain them for future reference.

The EMOS TSS910A is designed to provide early warning of fire by detecting smoke particles. It features a photoelectric sensor, an 85 dB acoustic alarm, and an optical LED warning light, ensuring reliable detection and alerting. With its 10-year lifespan and included 9V battery, it offers long-term safety for your home or office.

2. Varnostne informacije

  • This smoke detector is intended for indoor use only.
  • Do not paint the smoke detector. Paint can clog the sensing chambers and prevent the alarm from functioning correctly.
  • Ne nameščajte v prostorih z visoko vlažnostjo, ekstremnimi temperaturami ali prekomernim prahom.
  • Regularly test the smoke detector as described in the operating instructions.
  • Never ignore a smoke alarm. Investigate the cause and take appropriate action immediately.
  • Keep out of reach of children unless installed securely.
  • Baterije in napravo zavrzite v skladu z lokalnimi predpisi.

3. Vsebina paketa

Prepričajte se, da so v paketu prisotni vsi elementi:

  • 1 x EMOS TSS910A Smoke Detector
  • 1 x 9V Battery (Alkaline)
  • Pritrdilni vijaki in stenski vložki
  • Uporabniški priročnik (ta dokument)

4. Izdelek je končanview

Familiarize yourself with the components of your EMOS TSS910A smoke detector:

EMOS TSS910A Smoke Detector with labels for Acoustic Alarm, Optical Alarm, and Test Button, along with dimensions.

This image displays the EMOS TSS910A smoke detector from the front and side, highlighting key features. The front view shows the acoustic alarm vents, the optical alarm LED, and the central test button. An inset image shows the battery compartment. Dimensions are also provided: 101 mm diameter and 36 mm height.

  • Testni gumb: Press to test the alarm function.
  • Optical LED: Flashes periodically during normal operation and rapidly during an alarm.
  • Zvočni alarm: Emits an 85 dB sound during an alarm.
  • Predal za baterije: Located on the rear for the 9V battery.
  • Montažna plošča: Detachable plate for ceiling or wall installation.

5. Nastavitev in namestitev

5.1 Izbira lokacije

For optimal protection, install smoke detectors in every sleeping area and on every level of your home, including the basement. Consider these guidelines:

  • Install on the ceiling in the center of a room or hallway.
  • If wall-mounted, the top of the alarm should be 10-30 cm (4-12 inches) below the ceiling.
  • Keep away from corners (at least 50 cm / 20 inches from walls).
  • Avoid installing near windows, doors, or air vents where drafts could interfere with smoke detection.
  • Do not install in kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust fumes could cause false alarms.
EMOS TSS910A Smoke Detector installed on a ceiling in a modern room.

This image shows the EMOS TSS910A smoke detector mounted on a ceiling, demonstrating a typical installation scenario in a residential setting. The detector is centrally placed on the ceiling, blending with the room's decor.

5.2 Namestitev baterije

  1. Twist the smoke detector counter-clockwise to detach it from the mounting plate.
  2. Locate the battery compartment on the back of the detector.
  3. Connect the included 9V alkaline battery to the battery clip, ensuring correct polarity (+ to + and - to -).
  4. Vstavite baterijo v predal.
  5. Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.
EMOS TSS910A Smoke Detector with the battery compartment open, showing where to insert the 9V battery.

This image illustrates the open battery compartment of the EMOS TSS910A smoke detector, clearly showing the terminals for the 9V battery. This visual aid helps users correctly install the battery.

5.3 Montaža detektorja

  1. Once the battery is installed, hold the mounting plate against the chosen ceiling or wall location.
  2. Mark the positions for the two screw holes.
  3. Drill two holes at the marked positions. Insert the wall plugs if necessary.
  4. Montažno ploščo pritrdite s priloženimi vijaki.
  5. Attach the smoke detector to the secured mounting plate by aligning the marks and twisting clockwise until it locks firmly.
  6. After mounting, press the test button to ensure the alarm functions correctly.

6. Navodila za uporabo

6.1 Običajno delovanje

Once installed with a fresh battery, the smoke detector is active. The optical LED will flash approximately once every 40-60 seconds to indicate normal operation.

6.2 Testiranje alarma

It is crucial to test your smoke detector weekly to ensure it is functioning correctly. To test:

  • Press and hold the large central Gumb Test on the front of the detector for a few seconds.
  • The alarm will sound loudly (85 dB), and the LED will flash rapidly.
  • Spustite gumb. Alarm bi se moral ustaviti.
  • Če se alarm ne oglasi, glejte razdelek Odpravljanje težav.

6.3 Prikaz alarma

  • Alarm za dim: When smoke is detected, the alarm will sound continuously (85 dB), and the red LED will flash rapidly.
  • Opozorilo o nizki bateriji: The detector will chirp approximately once every 30-40 seconds, and the LED will flash simultaneously, indicating that the battery needs to be replaced. This warning will continue for about 30 days.

7. Vzdrževanje

7.1 Zamenjava baterije

When the low battery warning sounds (a chirp every 30-40 seconds), replace the 9V battery immediately. Use only alkaline 9V batteries. To replace:

  1. Twist the smoke detector counter-clockwise to remove it from the mounting plate.
  2. Disconnect the old 9V battery from the clip and remove it.
  3. Connect a new 9V alkaline battery, ensuring correct polarity.
  4. Place the new battery into the compartment.
  5. Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.
  6. Test the alarm using the test button after battery replacement.

7.2 Cleaning Your Smoke Detector

Dust and debris can accumulate on the smoke detector and affect its performance. Clean your detector at least once a month:

  • Gently vacuum the exterior of the smoke detector using a soft brush attachment.
  • Wipe the cover with a slightly damp krpo. Ne uporabljajte čistilnih sredstev ali topil.
  • Never paint the smoke detector.

7.3 Življenjska doba

The EMOS TSS910A smoke detector has a 10-year operational lifespan. After 10 years from the manufacturing date (usually printed on the device), the entire unit should be replaced, even if it appears to be working correctly.

EMOS TSS910A Smoke Detector installed on a ceiling with text '10 Years Safety'.

This image emphasizes the 10-year safety feature of the EMOS TSS910A smoke detector, shown installed on a ceiling. The long lifespan of the sensor and the low battery warning ensure continuous operation and safety.

8. Odpravljanje težav

TežavaMožen vzrokrešitev
Med preizkusom se alarm ne oglasi.Prazna ali nepravilno nameščena baterija.Preverite polarnost baterije. Zamenjajte z novo 9V alkalno baterijo.
Detector chirps every 30-40 seconds.Opozorilo o nizki bateriji.Takoj zamenjajte 9V baterijo.
Pogosto se pojavljajo lažni alarmi.Improper location (e.g., near kitchen, bathroom, or dusty area). Dust accumulation.Relocate the detector to a more suitable area. Clean the detector as per maintenance instructions.
LED does not flash during normal operation.Dead battery or unit malfunction.Replace battery. If problem persists, the unit may need replacement.

9. Specifikacije

FunkcijaPodrobnost
Številka modelaTSS910A
Vrsta senzorjaFotoelektrična
Glasnost alarma85 dB
Vir napajanja1 x 9V alkalna baterija (priložena)
Delovna zvezatage9V
Življenjska doba10 leti
Dimenzije (D x V)10.1 x 3.6 cm (4 x 1.4 palca)
Teža190 g (0.42 lbs)
MaterialPlastika
barvaBela
Delovna vlažnost5 % do 95 % RH (brez kondenzacije)

10. Garancija in podpora

EMOS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official EMOS webspletnega mesta. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

Povezani dokumenti - TSS910A

Prejview EMOS P56500S Smoke Detector User Manual and Installation Guide
Comprehensive user manual and installation guide for the EMOS P56500S Photoelectric Smoke Detector. Learn about setup, features, maintenance, and safety precautions.
Prejview P56500S Smoke Detector User Manual
This user manual provides comprehensive instructions for the EMOS P56500S smoke detector. It covers technical specifications, installation, mobile app integration, operation, maintenance, and safety guidelines for optimal fire safety in your home.
Prejview P56500S Smoke Detector User Manual
Comprehensive user manual for the EMOS P56500S smoke detector, covering installation, operation, mobile app connectivity, maintenance, and safety information. Learn how to set up, test, and care for your smoke detector.
Prejview EMOS P56300 | Uporabniški priročnik in navodila za namestitev toplotnega detektorja THS916A
Naučite se namestiti in upravljati svoj toplotni detektor EMOS P56300 | THS916A s tem obsežnim uporabniškim priročnikom. Vključuje varnostne informacije, tehnične specifikacije, smernice za postavitev in nasvete za odpravljanje težav.
Prejview Uporabniški priročnik za detektor ogljikovega monoksida P56400S | EMOS
Obsežen uporabniški priročnik za detektor ogljikovega monoksida (CO) EMOS P56400S. Spoznajte varnostna navodila, tehnične specifikacije, namestitev, delovanje, integracijo mobilne aplikacije z EMOS GoSmart in odpravljanje težav.
Prejview EMOS zv.tagUporabniški priročnik in funkcije e-testerja VT-120
Celovit vodnik po EMOS Vol.tage Tester VT-120, ki podrobno opisuje njegove funkcije, delovanje, varnostne ukrepe in zmogljivosti testiranja komponent. Vključuje AC/DC voltage, polarnost, kontinuiteta in zaznavanje uhajanja mikrovalov.