FLASHFORGE AD5X Multi-Color 3D Printer

1. Uvod

The FLASHFORGE AD5X is an advanced multi-color FDM 3D printer designed for both hobbyists and professionals. It features an innovative Intelligent Filament System (IFS) for seamless multi-color printing, high-speed capabilities up to 600mm/s, and a robust Core XY structure for precise and stable operation. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your AD5X 3D printer.

Figure 1.1: The FLASHFORGE AD5X 3D Printer with its multi-color printing setup.

2. Varnostne informacije

Please read all safety warnings and instructions carefully before operating the printer to prevent injury or damage to the device.

• Električna varnost: Ensure the printer is connected to a grounded power outlet. Do not operate with wet hands or in damp pogojev.
• Vroče površine: The nozzle and build plate reach high temperatures during operation. Avoid direct contact to prevent burns. Allow components to cool before handling.
• Gibljivi deli: Keep hands, hair, and loose clothing clear of moving parts during operation to prevent entanglement.
• Prezračevanje: Operate the printer in a well-ventilated area, especially when printing with materials that may emit fumes.
• Filament Handling: Use caution when loading and unloading filament, as the extruder can be hot.
• Otroci in hišni ljubljenčki: Keep the printer out of reach of children and pets. Adult supervision is required if children are present.

3. Vsebina paketa

Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:

• AD5X 3D Printer (x1)
• Filament 10g (x4)
• Napajalni kabel (x1)
• IFS Connection Cable (x1)
• 4-Color Module (IFS) (x1)
• Spool Holder (x4)
• 4-in-1 Guide Tube (x1)
• Montažna plošča (x1)
• Vijak M3x6 (x4)
• After-sales Service Card (x1)
• Navodila za hiter začetek (x1)
• Display Screen (x1)
• Grease (x1)
• Sponka za kabel (x1)
• Glue (x1)
• inbus ključ (x3)
• Diagonal Pliers (x1)
• Unclogging Pin Tool (x1)
• Phillips Screwdriver (x1)

Figure 3.1: Visual representation of the AD5X packing list.

4. Navodila za namestitev

4.1 Razpakiranje in namestitev

Carefully remove the printer from its packaging. Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight, heat sources, or excessive dust.

4.2 Initial Power-On and Screen Setup

Connect the power cord to the printer and a suitable power outlet. Turn on the printer using the power switch. Follow the on-screen instructions on the 4.3-inch touch LCD screen for initial setup, including language selection and network connection (Wi-Fi/Ethernet).

4.3 Intelligent Filament System (IFS) Installation

Attach the four spool holders to the designated mounting points on the printer. Connect the 4-Color Module (IFS) to the printer using the IFS Connection Cable. Guide the filament from each spool through the 4-in-1 Guide Tube to the IFS module.

Figure 4.1: The AD5X's 4KG Automatic Filament Switching system.

4.4 Vstavljanje filamenta

Ensure the printer is powered on. Select the filament loading option on the touch screen. Insert the end of the filament into the designated input port on the IFS module. The system will automatically detect and feed the filament into the extruder.

4.5 Samodejno niveliranje

The AD5X features a fully automatic leveling system. From the printer's touch screen, initiate the auto-leveling process. The printer will automatically probe the build plate at multiple points to ensure optimal bed adhesion and print quality. No manual adjustments are typically required.

Figure 4.2: Automatic leveling and Core XY structure for stable printing.

5. Navodila za uporabo

5.1 Konec programske opremeview (FlashPrint5)

The FLASHFORGE AD5X is compatible with FlashPrint5 slicing software (also compatible with Orca Slicer). Install FlashPrint5 on your computer. This software allows you to import 3D models, adjust print settings (layer height, infill, supports), and prepare the model for printing (slicing).

5.2 Začetek tiskanja

After slicing your model in FlashPrint5, you can transfer the print file to the printer via USB disk, Wi-Fi, or Ethernet. Select the desired file on the printer's touch screen and initiate the print. The printer will preheat the nozzle and build plate to the required temperatures before starting the print.

5.3 Multi-Color Printing

The AD5X's multi-color printing capability allows for up to four colors simultaneously. In FlashPrint5, assign different colors to various parts of your model. The Intelligent Filament System will automatically manage filament switching during the print process, ensuring vibrant and intricate designs.

Figure 5.1: Key features: Precision, Speed, and Reliability of the AD5X.

5.4 Visokohitrostno tiskanje

The AD5X boasts a maximum printing speed of 600mm/s and an acceleration of 20,000mm/s². This allows for significantly faster print times compared to conventional 3D printers, without compromising print quality. Ensure your model and slicing settings are optimized for high-speed printing.

Figure 5.2: Print speed comparison demonstrating the AD5X's rapid printing capabilities.

5.5 Nozzle Replacement

The AD5X features a quick-release nozzle design, allowing for easy and rapid nozzle changes. To replace the nozzle, ensure the printer is off and the nozzle has cooled. Gently press the release mechanism and pull the nozzle assembly out. Insert the new nozzle until it clicks into place. The printer comes with a 0.4mm nozzle (default) and supports optional 0.25mm, 0.6mm, and 0.8mm nozzles.

Figure 5.3: Quick-release nozzle system and available nozzle diameters.

5.6 Podprti materiali

The AD5X supports a wide range of filament types, including:

• PLA (polilaktična kislina)
• PETG (polietilen tereftalat glikol)
• TPU (termoplastični poliuretan)
• PLA-CF (PLA ogljikova vlakna)
• PETG-CF (PETG ogljikova vlakna)

Always refer to the filament manufacturer's recommendations for optimal printing temperatures and settings.

Slika 5.4: Npramples of prints using various supported filament types.

6. Vzdrževanje

6.1 Postopki čiščenja

• Zunanjost: Wipe the exterior surfaces of the printer with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Gradbena plošča: After each print, remove any residual filament from the build plate. For stubborn residue, use a plastic scraper. The PEI flexible steel sheet provides strong adhesion and is easy to clean.
• Šoba: Periodically clean any filament residue from the exterior of the nozzle using a brass brush (when cold) or a soft cloth (when warm, with caution).

6.2 Nega šob

To prevent clogs, ensure proper filament loading and unloading. If a clog occurs, use the provided unclogging pin tool to clear the nozzle. For severe clogs, the quick-release design allows for easy replacement of the nozzle assembly.

6.3 Splošna nega

• Mazanje: Apply a small amount of the provided grease to the Z-axis lead screws and smooth rods periodically to ensure smooth movement.
• Posodobitve vdelane programske opreme: Check the FLASHFORGE official webZa zagotovitev optimalne zmogljivosti in novih funkcij obiščite spletno mesto za vse razpoložljive posodobitve vdelane programske opreme.
• Shranjevanje: When not in use for extended periods, store the printer in a clean, dry environment.

7. Odpravljanje težav

This section addresses common issues you might encounter. For more detailed troubleshooting, refer to the official FLASHFORGE support resources.

8. Specifikacije

9. Garancija in podpora

For warranty information and technical support, please refer to the After-sales Service Card included in your package or visit the official FLASHFORGE webspletnega mesta. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.