GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard User Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct operation and to prevent damage.

Nastavitev in namestitev

Pred začetkom namestitve se prepričajte, da je sistem izklopljen in izklopljen iz stenske vtičnice. Nosite antistatično zapestnico, da preprečite poškodbe komponent zaradi elektrostatične razelektritve (ESD).

Postavitev matične plošče

Familiarize yourself with the motherboard's layout and key components before proceeding with installation.

Slika 1: Od zgoraj navzdol view of the GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard, showing the CPU socket, DIMM slots, PCIe slots, and M.2 slots.

Slika 2: Pod kotom view of the motherboard, highlighting the VRM heatsinks and M.2 thermal guards.

CPU Installation (LGA 1700)

1. Na matični plošči poiščite vtičnico LGA 1700 za procesor.
2. Nežno pritisnite ročico za nalaganje navzdol in jo povlecite na stran, da odprete pokrov podnožja procesorja.
3. Poravnajte trikotno oznako na procesorju z ustrezno oznako na podnožju. Previdno namestite procesor v podnožje, ne da bi ga silili.
4. Close the load plate and push the load lever back into its locked position. The socket cover will pop off automatically.
5. Namestite hladilnik procesorja v skladu z navodili proizvajalca.

Namestitev pomnilnika (RAM)

This motherboard supports DDR5 memory modules. For optimal performance, install memory modules in the recommended slots for dual-channel configuration.

1. Odprite sponke na obeh koncih reže DIMM.
2. Poravnajte zarezo na pomnilniškem modulu DDR5 s ključem v reži DIMM.
3. Modul trdno vstavite v režo, dokler se sponki ne zaskočita. Prepričajte se, da sta obe sponki popolnoma zaprti.

Storage Device Installation (M.2 SSDs)

The motherboard features M.2 slots with EZ-Latch Plus for tool-less installation.

1. Locate the M.2 slots, typically covered by thermal guards.
2. Remove the M.2 thermal guard by unscrewing it (if applicable) or using the EZ-Latch mechanism.
3. Vstavite pogon M.2 SSD v režo pod kotom 30 stopinj.
4. Push the M.2 SSD down and secure it using the EZ-Latch Plus mechanism or the provided screw.
5. Reinstall the M.2 thermal guard to ensure proper cooling.

Graphics Card Installation (PCIe)

The primary PCIe 5.0 x16 slot features EZ-Latch for easy removal.

1. Odprite zadrževalno sponko na koncu reže PCIe x16.
2. Align your graphics card with the slot and press it down firmly until it clicks into place. Ensure the retention clip is closed.
3. Grafično kartico pritrdite na ohišje računalnika z vijaki.

Connecting Peripherals and Power

• Napajalni priključki: Priključite 24-pinski glavni napajalni priključek ATX in 8-pinski napajalni priključek CPU iz napajalnika na matično ploščo.
• Priključki na sprednji plošči: Connect the power button, reset button, HDD LED, and front panel USB/audio headers to their respective pins on the motherboard. Refer to the motherboard diagram for exact locations.
• Naprave SATA: Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA ports on the motherboard, and connect SATA power cables from your power supply to the drives.
• Zadnja V/I plošča: Connect your monitor, keyboard, mouse, and other USB devices to the appropriate ports on the rear I/O panel.

Slika 3: Rear I/O panel showing USB ports, Wi-Fi antenna connectors, HDMI, DisplayPort, 2.5GbE LAN, and audio jacks.

Namestitev Wi-Fi antene

The motherboard includes a Wi-Fi 6E module. Install the included antenna for wireless connectivity.

1. Locate the two antenna connectors on the rear I/O panel.
2. Screw the Wi-Fi antenna connectors onto the corresponding ports.
3. Position the antenna for optimal signal reception. The WIFI Compass feature can assist in finding the best orientation.

Navodila za uporabo

First Boot-Up and BIOS/UEFI Setup

1. Ko sestavite vse komponente, priključite monitor, tipkovnico in miško.
2. Priključite napajalni kabel in vklopite napajanje.
3. Pritisnite gumb za vklop na ohišju računalnika.
4. Med postopkom zagona večkrat pritisnite DEL tipko za vstop v orodje za nastavitev BIOS/UEFI.
5. In the BIOS, you can configure system settings, boot order, and enable features like XMP for your DDR5 memory.

Namestitev gonilnika

After installing your operating system (Windows 10 or Windows 11), install the necessary drivers for optimal performance and functionality.

• Gonilniki čipov: Essential for motherboard functionality.
• Gonilniki LAN-a: For 2.5GbE wired network connectivity.
• Gonilniki za Wi-Fi: For Wi-Fi 6E wireless connectivity.
• Avdio gonilniki: Za vhod in izhod zvoka.
• Gonilniki grafičnih kartic: Install drivers for your integrated or dedicated graphics card.

Gonilnike najdete na uradni spletni strani GIGABYTE. webspletno mesto za vaš specifični model matične plošče.

XMP Profile Aktivacija

To achieve the rated speed of your DDR5 memory (up to 5600MHz), you may need to enable the Extreme Memory Profile (XMP) in the BIOS.

1. Enter the BIOS setup utility during boot.
2. Navigate to the memory settings section (often under "Tweaker" or "Advanced Memory Settings").
3. Locate the XMP profile option and enable it. Select the desired profile if multiple are available.
4. Shranite spremembe in zapustite BIOS.

Vzdrževanje

Redno vzdrževanje pomaga zagotoviti dolgo življenjsko dobo in stabilno delovanje vaše matične plošče in sistema.

Čiščenje

• Periodically clean dust from inside your PC case, especially around fans, heatsinks, and motherboard components.
• Use compressed air to gently blow away dust. Hold fans to prevent them from spinning rapidly during cleaning.
• Pred čiščenjem se prepričajte, da je sistem izklopljen in izklopljen iz električnega omrežja.

Posodobitve BIOS-a

GIGABYTE občasno izdaja posodobitve BIOS-a za izboljšanje stabilnosti, združljivosti in zmogljivosti sistema. Preverite uradno GIGABYTE-ovo website for the latest BIOS versions for your model.

• Prenesite pravilen BIOS file for your motherboard model.
• Follow the instructions provided by GIGABYTE for updating the BIOS, typically using a utility within the BIOS or a dedicated flashing tool.
• Pozor: Ne prekinjajte postopka posodabljanja BIOS-a, saj lahko to povzroči, da vaša matična plošča ne deluje.

Posodobitve gonilnikov

Keep your system drivers updated to ensure optimal performance and compatibility with new software and hardware. Regularly check the GIGABYTE webspletno mesto za posodobljene gonilnike.

Odpravljanje težav

V tem razdelku so rešitve za pogoste težave, na katere lahko naletite.

Ni napajanja / Ni zagona

• Prepričajte se, da so vsi napajalni kabli (24-pinski ATX, 8-pinski CPU) varno priključeni na matično ploščo in napajalnik.
• Verify that the power supply is switched on and plugged into a working outlet.
• Check front panel connections (power button header) for correct installation.
• Poskusite zagnati računalnik z minimalnimi komponentami (CPU, en RAM modul, grafična kartica, če ni integrirane grafike), da ugotovite vzrok težave.

Ni izhoda zaslona

• Ensure your monitor is connected to the correct display output (either motherboard's integrated graphics port or dedicated graphics card port).
• Verify that the graphics card is properly seated in its PCIe slot and has all necessary power cables connected.
• Če je mogoče, preizkusite z drugim monitorjem ali kablom za prikaz.

Nestabilnost sistema / zrušitve

• Preverite temperaturo procesorja in grafičnega procesorja, da se prepričate, da sta znotraj varnih delovnih meja.
• Verify that RAM modules are correctly installed and consider running a memory diagnostic tool.
• Prepričajte se, da so vsi gonilniki posodobljeni.
• If XMP is enabled, try disabling it to see if memory stability improves.

BIOS Reset (Clear CMOS)

If you encounter issues after changing BIOS settings, you can reset the BIOS to its default settings.

1. Power off your system and unplug the power cord.
2. Locate the "Clear CMOS" jumper or button on the motherboard (refer to the motherboard diagram).
3. For a jumper, move the jumper cap from pins 1-2 to 2-3 for 5-10 seconds, then move it back to 1-2. For a button, press and hold it for 5-10 seconds.
4. Alternatively, remove the CMOS battery (CR2032) for 1-2 minutes, then reinsert it.
5. Plug in the power cord and power on the system.

Specifikacije

Garancija in podpora

Za podrobne informacije o garanciji glejte garancijski list, ki je priložen izdelku, ali obiščite uradno spletno stran GIGABYTE webspletno mesto. GIGABYTE nudi tehnično podporo in vire za svoje izdelke.

• Spletna podpora: Visit the GIGABYTE support webspletno mesto za pogosta vprašanja, prenose gonilnikov, posodobitve BIOS-a in vodnike za odpravljanje težav.
• Obrnite se na podporo: Glejte GIGABYTE website for contact information for technical assistance.

Always ensure you have your product model number and serial number ready when contacting support.