1. Uvod
This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.
2. Izdelek je končanview
The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.
2.1 Ključne lastnosti
- Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
- MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
- 425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
- Zaklepni mehanizem: Ensures angles are securely held for transfer.
- Dual Bubble Levels: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
- Osvetljen LCD: 0.1° resolution display for clear visibility in various lighting conditions.
- Vzdržljiva konstrukcija: IP54 waterproof housing, resistant to dust, water, and oil.
2.2 Komponente
- Glavni del: Houses the digital display and primary measuring arm.
- Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
- Zaklepni gumb: Secures the sliding leg at a desired angle.
- LCD zaslon: Shows digital angle readings and mode indicators.
- Gumbi za upravljanje: (On-Off, Hold, 180°, MTR, COM) for various functions.
- Ravni mehurčkov: One horizontal and one vertical for traditional leveling.
3. Nastavitev
3.1 Namestitev baterije
The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:
- Locate the battery compartment cover, typically on the side or back of the main body.
- Odprite pokrov.
- Vstavite dve bateriji AA in pazite na pravilno polarnost (+/-).
- Trdno zaprite pokrov prostora za baterije.
The bubble levels operate mechanically and do not require batteries.
3.2 Začetni vklop
Pritisnite Vklop-izklop button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.
4. Navodila za uporabo
4.1 Basic Angle Measurement
- Vklopite napravo.
- Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
- Adjust the sliding leg until it aligns perfectly with the second surface.
- Read the angle directly from the backlit LCD display.
- Use the lock knob to secure the angle for transfer if needed.
4.2 MTR (Simple Miter) Mode
Pritisnite MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.
4.3 COM (Compound Bevel Cutting) Mode
Pritisnite COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.
4.4 Funkcija zadrževanja
Pritisnite Drži button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Drži ponovno, da sprostite odčitavanje.
4.5 180° Supplementary Angle Display
Pritisnite 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.
4.6 Nastavitev ničle
To set the current position as the zero reference, fully close the angle finder and press the Vklop-izklop button briefly. The display will reset to "0.0". This allows for relative angle measurements.
4.7 Uporaba mehurčastih libel
The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.
5. Vzdrževanje
- Čiščenje: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp Uporabite lahko krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Shranjevanje: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
- Zamenjava baterije: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
- IP54 ocena: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Zaslon je prazen ali temen. | Prazne ali prazne baterije; nepravilna namestitev baterij. | Baterije zamenjajte z novimi baterijami AA in pri tem pazite na pravilno polarnost. |
| Netočne odčitke kotov. | Device not properly zeroed; obstruction; damaged sensor. | Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support. |
| Sliding leg does not lock securely. | Lock knob not tightened sufficiently; debris in mechanism. | Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism. |
7. Specifikacije
- Merilno območje: 0-220°
- Natančnost: ±0.2°
- Resolucija: 0.1°
- Sliding Leg Length: 425 mm
- Bubble Level Accuracy: 1.5mm / m
- vir energije: 2 x 1.5V LR6 (AA) batteries (for digital display)
- Material: Aluminij
- Stopnja zaščite: IP54 (odporno na prah in brizganje vode)
- Teža artikla: 1.28 funtov
- Dimenzije paketa: 17.87 x 9.17 x 1.77 palcev
8. Garancija in podpora
Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite račun kot dokazilo o nakupu.
Za dodatno pomoč lahko obiščete Dasqua Store on Amazon.
