Orbita 67100

Orbit 67100 1/4" Barb Drip Irrigation Multi-Stream Emitter Instruction Manual

Model: 67100

Uvod

The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.

Konec izdelkaview

The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.

Orbit 67100 Multi-Stream Drip Emitter

Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.

Ključne značilnosti:

Nastavitev in namestitev

  1. Priprava cevi: Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
  2. Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
  3. Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
  4. Umestitev: Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
  5. Priključek za vodni vir: Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
  6. Preverjanje sistema: Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.

Navodila za uporabo

The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.

Prilagajanje pretoka vode:

The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.

The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.

Vzdrževanje

Odpravljanje težav

TežavaMožen vzrokrešitev
Ni pretoka vode ali zmanjšan pretokClogged emitter; insufficient water pressure; emitter turned off.Clean the emitter; check water supply pressure; rotate emitter head to increase flow.
Puščanje na priključni točkiImproperly seated tubing; damaged barb.Ensure tubing is fully pushed onto the barb; replace emitter if barb is damaged.
Neenakomeren vzorec pršenjaPartial clog; incorrect adjustment.Clean the emitter nozzles; adjust the emitter head for desired pattern.

Specifikacije

Garancija in podpora

For warranty information or technical support, please refer to the official Orbit webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Za uveljavljanje garancije shranite račun.

Kontaktni podatki: Obiščite Trgovina Orbit na Amazonu or the official Orbit webspletno mesto za najnovejše podrobnosti o podpori.

Povezani dokumenti - 67100

Prejview Orbit Garden Watering Guide: Soaker Hose and Drip Systems
A comprehensive guide from Orbit on using soaker hose and drip watering systems for efficient garden irrigation. Learn about system setup, component descriptions, installation steps, and helpful tips for water conservation and maintaining healthy plants.
Prejview Navodila za namestitev sistema Orbit DripMaster za mikro namakalne sisteme
Celovit vodnik za namestitev mikro namakalnega sistema Orbit DripMaster. Naučite se, kako nastaviti učinkovito zalivanje vrtov, rastlin, dreves in grmovnic ter prihraniti vodo in čas.
Prejview Navodila za uporabo kompleta za zalivanje gredic in grmovnic Orbit Hose End
Naučite se namestiti komplet za zalivanje gredic in grmovnic Orbit s koncem cevi s tem obsežnim navodilom za uporabo. Vključuje navodila po korakih in načrt.amples za učinkovito namakanje vrta.
Prejview Navodila za uporabo avtomatskega zalivalnega sistema Orbit 27752-24
Ta priročnik vsebuje navodila za avtomatski zalivalni sistem Orbit 27752-24, ki zajemajo namestitev, programiranje, ročno zalivanje in odpravljanje težav.
Prejview Orbit Expandable Watering Timer: Installation and Programming Guide
Detailed installation and programming guide for the Orbit Expandable Watering Timer. Covers setup, features like Rain Delay and Manual Watering, troubleshooting tips, and technical specifications for optimal garden irrigation.
Prejview Orbit 1 Outlet Simple Watering Timer: User Guide and Programming Instructions
A comprehensive guide to programming and using the Orbit 1 Outlet Simple Watering Timer, including features, installation, troubleshooting, and important warnings.