Navodila za uporabo LED stebričke RAB Lighting B17

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Glavne lastnosti vključujejo:

• Energy-efficient LED with a 50,000-hour lifespan.
• Nastavljiv wattage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• Na seznamu UL za mokre lokacije.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Varnostne informacije

OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izključite napajanje. Namestitev mora opraviti usposobljen električar v skladu z vsemi veljavnimi nacionalnimi in lokalnimi električnimi predpisi.

• Zagotovite dovodni voltage is correct for the fixture.
• Do not handle live components.
• Nosite ustrezno osebno zaščitno opremo (PPE).
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Ne spreminjajte svetilke. Kakršne koli spremembe lahko razveljavijo garancijo in povzročijo varnostne nevarnosti.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Navodila za uporabo (ta dokument)

4. Nastavitev in namestitev

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Pripravite mesto namestitve: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Odklop napajanja: Preden začnete z električnimi deli, izklopite napajanje na odklopniku.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Izvedite električne povezave: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Prepričajte se, da so vse povezave varne in izolirane.
5. Izberite Wattage in CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Obnovi moč: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Navodila za uporabo

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24 W: Največja svetlost.
• 19 W: Medium brightness, reduced energy use.
• 14 W: Lower brightness, maximum energy savings.

Za prilagoditev: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Izbirna barvna temperatura (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Za prilagoditev: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. Zatemnitev 0–10 V

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Vzdrževanje

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Čiščenje: Zunanjost naprave občasno očistite z mehko krpo,amp krpo, da odstranite umazanijo in ostanke. Ne uporabljajte abrazivnih čistil ali topil. Pred čiščenjem se prepričajte, da je naprava izklopljena.
• Pregled: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• Zamenjava LED: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Odpravljanje težav

8. Specifikacije

9. Garancija in podpora

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webZa posebne garancijske pogoje in kontaktne podatke glejte spletno mesto ali dokumentacijo o nakupu.

RAB Lighting Contact: www.rablighting.com