Pomembne varnostne informacije
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Pred uporabo se prepričajte, da so vsi vijaki in sorniki dobro priviti.
- Ne stojte na stolu.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Vsebina paketa
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Uvodni vodnik (ta priročnik)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Navodila za montažo
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Razpakirajte komponente: Previdno vzemite vse dele iz embalaže in jih razporedite.
- Pritrdite kolesca na podstavek: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Vstavite plinsko dvigalo: V sredinsko luknjo podnožja stola namestite plinski dvigalni valj.
- Assemble Seat Mechanism: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Pritrdite naslonjala za roke: Secure the armrests to the seat cushion using the designated screws.
- Priključitev naslonjala na sedež: Attach the backrest to the seat assembly.
- Mount Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder.
- Pritrditev vzglavnika: Slide the headrest into the slots at the top of the backrest.
- Končno preverjanje: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Navodila za uporabo
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Nastavitev višine sedeža
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Funkcija nagiba
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Nastavitev višine: Push the lumbar support up or down.
- Prilagoditev globine: Rotate the knob (if present) or push the support forward/backward.
- Gibanje z ene strani na drugo: The lumbar support offers 10° side-to-side motion for dynamic support.
Slika: Podrobna view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Nastavitev naslona za roke
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Slika: View of the armrest, indicating the mechanism for height adjustment.
Vzdrževanje
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Čiščenje:
- For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp krpo.
- Do not saturate the chair with water.
- Pregled: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
- Kolesca: Keep casters clean from hair and debris to ensure smooth movement.
- plinsko dvigalo: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Odpravljanje težav
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Stol se ne nastavlja po višini | Okvara plinskega dvigala ali pa ročica ni vklopljena. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Stol se maja ali je nestabilen | Zrahljani vijaki ali neenakomerna montaža. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Kolesca se ne vrtijo gladko | Debris caught in casters. | Clean any hair, dust, or debris from the caster wheels. |
| Naslonjalo se ne nagne nazaj ali zaklene | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | Hbada |
| Številka modela | P2 |
| barva | Bela |
| Skupna višina | 105.5–126.5 cm (41.5–49.8 palcev) |
| Osnovna širina | 70 cm (27.6 palcev) |
| Širina sedeža | 51 cm (20.1 palcev) |
| Globina sedeža | 52 cm (20.5 palcev) |
| Razpon višine sedeža | 40–48 cm (15.7–18.9 palcev) |
| Teža predmeta | 43 funtov |
| Zadnji slog | Mrežasta hrbtna stran |
| Polnilni material | Spominska pena |
| Ležeči položaji | 3 (90°, 110°, 135°) |
| Ledvena opora | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Naslon za glavo | 2D Adjustable (Height, 40° Swivel) |
| Nasloni za roke | Height Adjustable (7.5 cm / 3 inches range) |
| Največja nosilnost | 264 lbs |
Garancija in podpora strankam
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garancija: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Vrne: Na voljo je 30-dnevna brezplačna politika vračila.
- Price Match: A 15-day price match guarantee is offered.
- Storitev za stranke: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webspletno mesto za kontaktne podatke.
