GODIYMODULES Visoka glasnosttagUporabniški priročnik za ploščo modula pretvornika enosmernega toka

1. Uvod

This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.

Slika 1.1: Od zgoraj navzdol view of the GODIYMODULES High Voltage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.

2. Varnostne informacije

WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltage vezja.

• Pred kakršnimi koli priklopi ali nastavitvami se prepričajte, da je napajanje izklopljeno.
• Do not touch any components on the board when power is applied.
• Use appropriate insulation and safety equipment.
• Preden priključite napajanje, preverite, ali so vse povezave pravilne.
• This module is intended for experienced electronics hobbyists and professionals.

3. Lastnosti

• Designed for Nixie and Magic Eye Tube anode and filament power supply.
• Nastavljiva visoka voltage DC output.
• Dedicated 6.3V filament voltage izhod.
• Compact board design.

4. Specifikacije

5. Nastavitev in povezave

Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.

5.1 Priključitev vhodnega napajanja

The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:

1. DC napajalni priključek: Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
2. Terminalni blok: Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.

Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.

Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.

5.2 Izhodne povezave

The module provides two main outputs via the green screw terminal block:

• DC 150V-280V Output: To je visoka voltage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
• DC 6.3V Output: This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
• GND: Common ground connection for both outputs.

Ensure all connections are secure and correctly polarized before applying power.

6. Navodila za uporabo

6.1 Vklop

Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltages.

6.2 Adjusting High Voltage Izhod

Visoka voltage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:

• Obračanje v smeri urinega kazalca bo povečanje izhodna voltage.
• Obračanje v nasprotni smeri urnega kazalca bo zmanjšanje izhodna voltage.

Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.

Slika 6.1: Zgoraj view of the module, clearly showing the blue potentiometer used for adjusting the high voltage izhod.

7. Vzdrževanje

The GODIYMODULES High Voltage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.

• Modul naj bo čist in brez prahu ter umazanije.
• Ensure adequate ventilation around the module to prevent overheating.
• Modula ne izpostavljajte vlagi ali ekstremnim temperaturam.
• Regularly inspect connections for looseness or corrosion.

8. Odpravljanje težav

• Ni izhodne voltage:
  • Verify the input power supply is connected and providing 9V-12V DC.
  • Check the polarity of the input DC power plug (inner positive, outer negative).
  • Ensure all output connections are secure.
• Nepravilna izhodna glasnosttage:
  • Za visoko voltage output, adjust the potentiometer as described in Section 6.2.
  • Use a multimeter to accurately measure the output voltages.
  • Zagotovite, da je vhodna voltage je stabilen in znotraj določenega območja.
• Pregrevanje modula:
  • Ensure adequate airflow around the module.
  • Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).

9. Podpora

For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.