Navodila za uporabo 3-polnega stikala za stensko luč BESTTEN Decorater

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference. This switch is designed for use in both single-pole and 3-way circuits, allowing control of a light fixture from one or two locations.

Slika: Konecview of BESTTEN 3-Way Decorator Wall Light Switches with included wallplates.

Varnostne informacije

OPOZORILO: NEVARNOST ELEKTRIČNEGA UDARA. NEPRAVILNA NAMESTITEV LAHKO POVZROČI HUDE POŠKODBE ALI SMRT.

• Always turn off power at the circuit breaker or fuse box before wiring.
• Verify power is off before proceeding with installation.
• Namestite v skladu z vsemi nacionalnimi in lokalnimi električnimi predpisi.
• Če niste prepričani glede katerega koli dela teh navodil, se posvetujte s kvalificiranim električarjem.
• Do not use with loads exceeding the specified ratings (15A, 120V/277V).
• Ta naprava je namenjena samo za uporabo v zaprtih prostorih.

Vsebina paketa

• BESTTEN 3-Way Decorator Wall Light Switch(es)
• Matching Decorator Wallplate(s)
• Montažni vijaki

Specifikacije

Image: Physical dimensions of the switch and wallplate.

Nastavitev in namestitev

Before beginning, ensure the power is OFF at the circuit breaker. This switch can be used for both single-pole and 3-way applications.

Wiring Terminals Overview

Image: Detailed back view of the switch illustrating screw and push-in terminals.

• Black Screw: Connects to the Hot/Line wire or the Hot/Load wire.
• Brass Screws: Connect to the Traveler wires in a 3-way circuit.
• Green Screw: Connects to the Ground wire.
• Quick Push-in Terminals: Accept 14 AWG solid copper wire only. Terminal screws accept up to 12 AWG.

3-Way Circuit Wiring Diagram

A 3-way switch allows control of a single light fixture from two different locations. This setup requires two 3-way switches.

Image: Standard 3-way wiring configuration.

1. Izklopite napajanje: Locate the circuit breaker controlling the switch and turn it OFF. Verify power is off using a voltage tester.
2. Prepoznajte žice: In a 3-way setup, you will typically find a Hot/Line wire, a Hot/Load wire, two Traveler wires, and a Ground wire. Label them if necessary.
3. Povežite ozemljitveno žico: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the switch.
4. Priključite potovalne žice: Connect the two traveler wires to the two brass screws on the switch. Ensure consistency between both 3-way switches (e.g., if one traveler is connected to the top brass screw on the first switch, connect it to the top brass screw on the second switch).
5. Connect Hot/Line or Hot/Load Wire: Connect the Hot/Line wire (from the power source) to the black screw on the first 3-way switch. Connect the Hot/Load wire (going to the light fixture) to the black screw on the second 3-way switch.
6. Varno stikalo: Carefully fold the wires into the electrical box. Mount the switch to the box using the provided screws.
7. Namestitev stenske plošče: Attach the decorator wallplate over the switch.
8. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Single Pole Circuit Wiring

For single-pole applications, the switch controls a light fixture from one location. Connect the Hot/Line wire to one black screw and the Hot/Load wire to the other black screw. Connect the ground wire to the green screw. The brass screws are not used in a single-pole configuration.

Navodila za uporabo

The BESTTEN 3-Way Decorator Wall Light Switch features a simple rocker paddle for operation.

• Press the top of the paddle to turn the connected light fixture ON.
• Press the bottom of the paddle to turn the connected light fixture OFF.

Image: Switch installed in a room, demonstrating its aesthetic integration.

Vzdrževanje

• Čiščenje: To clean the switch and wallplate, wipe with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil. Pred čiščenjem se prepričajte, da je naprava izklopljena.
• Pregled: Periodically inspect the switch and wallplate for any signs of damage or wear. If damage is observed, turn off power and replace the switch.

Odpravljanje težav

Garancija in podpora

BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN webmesto.

For additional product information or to explore other BESTTEN electrical solutions, please visit the Trgovina BESTTEN na Amazonu.