1. Uvod
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Pomembne varnostne informacije
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Always ensure the desk is properly assembled and stable before use.
- Ne prekoračite največje dovoljene teže 220 lbs (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Med delovanjem naj se otroci in hišni ljubljenčki ne približujejo mizi.
- Ne sedite in ne stojte na mizi.
- Uporabljajte samo priloženi napajalnik in komponente.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
3. Nastavitev in montaža
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Vsebina paketa
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Montažni koraki
- Razpakirajte vse komponente in jih položite na čisto, mehko površino, da preprečite praske.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Navodila za uporabo
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Nadzorna plošča je končanaview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Up/Down Arrows (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Prednastavitve pomnilnika (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Nastavitev prednastavitev pomnilnika
- S puščicami gor/dol prilagodite mizo želeni višini.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Zmogljivost teže
The desk is engineered to support up to 220 lbs (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Sistem proti trčenju
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vaše stoječe mize.
- Čiščenje: Obrišite namizje in okvir z mehko krpoamp krpo. Izogibajte se agresivnim kemikalijam ali abrazivnim čistilom, ki bi lahko poškodovala površino.
- Upravljanje kablov: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Pritrdilni elementi: Občasno preverite vse vijake in matico, da se prepričate, da so trdno pritrjeni. Po potrebi jih ponovno privijte.
- Pregled motorja: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Odpravljanje težav
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Miza se ne premika ali se ne odziva na ukaze. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| Pisalna miza se premika neenakomerno ali oddaja nenavadne zvoke. | Uneven load, loose fasteners, obstruction. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Sistem proti trčenju se pogosto sproži. | Ovira, občutljivo okolje. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | FLEXISPOT |
| Model | E3 |
| Dimenzije izdelka | 55.1"D x 27.5"Š x 27.6"V |
| barva | White Frame + White Top |
| Slog | Moderno |
| Osnovni material | Kovina |
| Vrsta zgornjega materiala | Les |
| Vrsta zaključka | Les |
| Posebna funkcija | Zrezani |
| Končna obdelava pohištva | Bela |
| Velikost | 55"x28" Whole-piece |
| Vključene komponente | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 palcev (min.) do 46.8 palcev (maks.) |
| Največja priporočena teža | 220 funtov (100 kg) |
| Zahtevana montaža | ja |
| Vrsta motorja | Dvojni motor |
| Nivo hrupa | Pod 50 dB |
8. Garancija in podpora
FLEXISPOT provides comprehensive warranty coverage for your peace of mind:
- 5-letno kritje: Applies to the desk frame and motor.
- 2-letno kritje: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT webspletno mesto za kontaktne podatke.
