Graco Nautilus 2.0 LX 3-in-1 Car Seat Instruction Manual

1. Uvod in konecview

This instruction manual provides essential information for the proper installation, use, and maintenance of your Graco Nautilus 2.0 LX 3-in-1 Car Seat. Please read all instructions carefully before using the car seat and keep this manual for future reference. Correct usage is crucial for your child's safety.

The Graco Nautilus 2.0 LX is designed to adapt to your child's growth, offering three modes of use:

1. Naprej obrnjen varnostni pas: For children weighing 26.5-65 lb.
2. Ojačevalnik visokega hrbta: For children weighing 40-100 lb.
3. Ojačevalnik brez hrbta: For children weighing 40-120 lb.

Image 1.1: The Graco Nautilus 2.0 LX 3-in-1 Car Seat.

2. Varnostne informacije

Always prioritize your child's safety. This car seat is designed to meet safety standards, but proper installation and use are paramount.

• Never use a car seat that has been involved in a moderate to severe crash, even if it appears undamaged.
• Always secure your child in the car seat, even for short trips.
• Ensure the car seat is correctly installed in your vehicle according to the instructions for the chosen mode of use.
• Do not use accessories or parts not approved by Graco.
• Registrirajte svoj avtosedež, da boste prejemali pomembne varnostne posodobitve in informacije o odpoklicu.

3. Značilnosti izdelka

The Graco Nautilus 2.0 LX includes several features designed for safety, comfort, and ease of use:

• Dizajn 3 v 1: Transitions from forward-facing harness to highback booster to backless booster.
• InRight LATCH System: Provides a secure, one-second attachment to your vehicle's LATCH anchors with an audible click for confirmation.
• Simply Safe Adjust Harness System: Allows the headrest and harness to adjust together in one motion, eliminating the need for rethreading.
• Jekleno ojačan okvir: Zagotavlja moč in vzdržljivost.
• 4-pozicijski nagib: Offers comfort for your child and helps achieve a proper fit in your vehicle.
• Vgrajeni držali za skodelice: Two personal cup holders for convenience.
• ProtectPlus Engineered: Designed to help protect in frontal, side, rear, and rollover crashes.

Image 3.1: Key features of the Graco Nautilus 2.0 LX car seat, including the 10-position adjustable headrest, ProtectPlus Engineering, steel-reinforced frame, easy access to installation instructions via QR code, 2 cup holders, and 4-position recline.

For detailed installation instructions, scan the QR code on the car seat or visit: http://x-qr.net/1SKP

4. Nastavitev in namestitev

Proper installation is critical. Refer to your vehicle's owner's manual for specific information regarding car seat installation and LATCH anchor locations.

4.1. Forward-Facing Harness Installation (26.5-65 lb)

1. Place the car seat forward-facing in the back seat of your vehicle.
2. Poiščite spodnja sidrišča LATCH na vašem vozilu.
3. Attach the car seat's InRight LATCH connectors to the vehicle's lower anchors. Listen for an audible click to confirm connection.
4. Press down firmly on the car seat while pulling the LATCH strap to remove slack. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.
5. Attach the top tether strap to your vehicle's tether anchor and tighten.

Image 4.1: Demonstrating the InRight LATCH system for easy and secure attachment.

4.2. Adjusting the Harness and Headrest

The Simply Safe Adjust Harness System allows for simultaneous adjustment of the headrest and harness height.

1. Locate the adjustment handle at the top of the headrest.
2. Squeeze the handle and slide the headrest up or down until the harness straps are at or slightly above your child's shoulders.
3. Release the handle to lock the headrest and harness into position.

Image 4.2: The Simply Safe Adjust harness system allows the headrest and harness to move together.

5. Načini delovanja

The Graco Nautilus 2.0 LX offers three distinct modes to accommodate your child's growth.

Image 5.1: The three modes of use for the Graco Nautilus 2.0 LX car seat.

5.1. Forward-Facing Harness Mode

Use this mode for children weighing 26.5-65 lb. Ensure the 5-point harness is properly adjusted and snug against your child's body. The chest clip should be at armpit level.

5.2. Highback Booster Mode

For children weighing 40-100 lb. In this mode, the car seat's internal harness is removed, and your vehicle's lap and shoulder belt are used to secure your child. Ensure the shoulder belt lies flat across the center of your child's shoulder and chest, and the lap belt is low on the hips, touching the thighs.

5.3. Backless Booster Mode

For children weighing 40-120 lb. The backrest of the car seat is removed, and only the booster base is used. Your vehicle's lap and shoulder belt are used to secure your child, following the same guidelines as the highback booster mode.

6. Vzdrževanje

Regular cleaning and maintenance will help prolong the life of your car seat.

• Podloga za sedež: The seat pad is machine washable. Refer to the care tag on the pad for specific washing instructions. Use cold water and a gentle cycle. Drip dry. Do not use bleach.
• Pasovi za oprsje: Obrišite pasove z oglasomamp cloth. Do not machine wash or immerse in water, as this may weaken the straps.
• Zaponka: Clean the buckle by placing it in a cup of warm water and gently agitating it. Do not use soaps or detergents.
• Plastični in kovinski deli: Wipe with mild soap and cool water.

7. Odpravljanje težav

If you encounter issues with your Graco Nautilus 2.0 LX car seat, consider the following common solutions:

• Težavnost zategovanja pasu: Ensure the harness straps are not twisted. Check that no fabric or clothing is obstructing the harness path.
• Ohlapna namestitev: Re-read the installation instructions carefully. Ensure the LATCH connectors are fully engaged and the strap is pulled tight while pressing down on the car seat. Verify that the car seat does not move more than 1 inch at the belt path.
• Lepljenje zaponke: Clean the buckle as described in the Maintenance section (Section 6). Avoid food debris or liquids entering the buckle mechanism.

For persistent issues or concerns, contact Graco customer support.

8. Specifikacije

9. Garancija in podpora

For warranty information, product registration, or customer support, please visit the official Graco website or contact their customer service department. Keeping your purchase receipt and product registration information readily available will assist in any warranty claims or support inquiries.

Uradnik podjetja Graco Webspletno mesto: www.gracobaby.com