Uporabniški priročnik za 7-delni komplet elektronskih globinomerov Dasqua 4710-1205 0-16-palčni

1. Uvod

This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.

Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.

2. Vsebina paketa

Preverite, ali so v paketu prisotne vse komponente:

• Electronic Depth Gage Unit
• Set of Measurement Rods (7 pieces)
• Torbica za shranjevanje
• Garancijsko pismo

Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.

3. Ključne značilnosti

• Resolucija: 0.0005-inch / 0.01mm for precise measurements.
• Standardna skladnost: Manufactured in accordance with DIN863 standards.
• Vreteno: Hardened, ground, and lapped for enhanced accuracy.
• Vsestranskost: Designed to accommodate a broad range of measurement applications.
• Zaslon: Large, digital display for clear and quick readings.
• Konstrukcija: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
• Ponastavitev na ničlo: Ability to reset to zero at any position for comparative depth measurements.

4. Navodila za nastavitev

4.1. Namestitev baterije

The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:

1. Locate the battery compartment cover on the back of the digital display unit.
2. Za odpiranje pokrova uporabite majhen izvijač ali kovanec.
3. Vstavite novo baterijo CR2032 s pozitivno stranjo (+) obrnjeno navzgor.
4. Varno namestite pokrov prostora za baterije.

4.2. Attaching Measurement Rods

Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.

1. Identify the threaded end of the measurement rod.
2. Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
3. Ensure the rod is securely attached and straight.

Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.

Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.

5. Navodila za uporabo

5.1. Vklop/izklop

• Pritisnite VKLOP/IZKLOP gumb za vklop naprave.
• Pritisnite VKLOP/IZKLOP button again to power off the device.

5.2. Unit Conversion (Inch/Millimeter)

• Pritisnite mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.

5.3. Nastavitev ničle

The zero-reset function allows for comparative measurements or setting a reference point.

1. Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
2. Pritisnite NIČ gumb. Na zaslonu se bo prikazala '0.000' ali '0.00'.

5.4. Merjenje

1. Ensure the depth gage is zeroed on a reference surface.
2. Place the base of the depth gage firmly on the surface from which the depth is to be measured.
3. Lower the measurement rod into the hole or recess until its tip contacts the bottom.
4. Meritev odčitajte neposredno z digitalnega zaslona.

5.5. Funkcija zadrževanja

• Pritisnite PRIDRŽI button to freeze the current reading on the display.
• Pritisnite PRIDRŽI ponovno pritisnite gumb, da sprostite odčitek in se vrnete na meritev v živo.

Slika 5.1: Podrobno view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.

6. Vzdrževanje

6.1. Čiščenje

• Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
• Za trdovratno umazanijo uporabite krpo, ki jo nežnoampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
• Ensure no liquid enters the electronic components.

6.2. Shranjevanje

• Store the depth gage in its protective case when not in use.
• Napravo hranite v suhem okolju, stran od neposredne sončne svetlobe, ekstremnih temperatur in visoke vlažnosti.
• Če napravo shranjujete dlje časa, odstranite baterijo, da preprečite puščanje.

6.3. Zamenjava baterije

Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.

7. Odpravljanje težav

• Zaslon je prazen ali zatemnjen:
  Check battery installation. Replace the battery if necessary. Ensure the device is powered on.
• Netočne meritve:
  Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached.
• Gumbi se ne odzivajo:
  Preverite napolnjenost baterije. Če težava po zamenjavi baterije ne izgine, se obrnite na podporo strankam.

8. Specifikacije izdelka

Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.

9. Garancija in podpora

This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webspletno mesto ali kanale za pomoč strankam.