Xigmatek Elysium II Full Tower PC Case User Manual

1. Uvod

Thank you for choosing the Xigmatek Elysium II Full Tower PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and optimal performance.

Figure 1.1: Xigmatek Elysium II Full Tower PC Case with illuminated ARGB fans.

Ključne značilnosti:

• Four-sided tempered glass panels for a premium aesthetic and component visibility.
• Supports motherboards up to SSI EEB/CEB and E-ATX for high-end workstation and gaming builds.
• Extensive cooling support with pre-installed 16 x 140mm ARGB square ring fans.
• Accommodates large liquid cooling radiators: Top (up to 420mm), Front (up to 480mm), Rear (up to 280mm).
• CPU cooler height support up to 220mm.
• Graphics card length support up to 460mm.
• Convenient top I/O panel with USB Type-C x 1, USB 3.0 x 2, USB 2.0 x 1, and HD Audio Jack.

2. Specifikacije

3. Nastavitev in namestitev

Before starting, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation steps.

3.1 Vsebina paketa

• Xigmatek Elysium II Full Tower PC Case
• 16 x 140mm ARGB Square Ring Fans (pre-installed)
• 2 x Galaxy II Fan Control Boxes
• Remote Control Sets
• Škatla s priborom (vijaki, kabelske vezice, distančniki itd.)
• Uporabniški priročnik (ta dokument)

3.2 Identifikacija komponent

Figure 3.1: Internal layout of the Elysium II case, highlighting fan mounts and component areas.

Slika 3.2: Zadnji notranji view, showing cable management space and drive bay locations.

3.3 koraki namestitve

1. Pripravite primer: Carefully remove the tempered glass panels. Lay the case on its side on a stable, flat surface.
2. Namestite matično ploščo: Install the necessary standoffs for your motherboard form factor. Gently place your motherboard onto the standoffs and secure it with screws.
3. Namestitev napajalne enote (PSU): Mount your PSU into its designated compartment (top mount). Secure it with screws from the rear of the case. Route necessary cables through the cable management cutouts.
4. Namestitev naprav za shranjevanje: Locate the drive bays for 2.5" SSDs and 3.5" HDDs. Secure your storage devices using the provided screws or tool-less mechanisms.
5. Install Graphics Card (GPU) and Expansion Cards: Remove the necessary PCIe slot covers. Insert your graphics card and any other expansion cards into their respective slots on the motherboard and secure them.
6. Povežite kable: Connect all power cables from the PSU to your motherboard, GPU, and storage devices. Connect the front panel I/O cables (USB, audio, power/reset buttons, LEDs) to the appropriate headers on your motherboard. Ensure all pre-installed fan cables and ARGB cables are connected to the fan control boxes and then to the motherboard or PSU as required.
7. Upravljanje kablov: Utilize the cable routing channels and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
8. Ponovna namestitev plošč: Once all components are installed and cables are managed, carefully reattach the tempered glass panels.

4. Navodila za uporabo

4.1 Vklop

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button located on the top I/O panel of the case to start your system.

4.2 Nadzor ventilatorja ARGB

The Elysium II comes with pre-installed ARGB fans and two Galaxy II fan control boxes. You can control the lighting effects and fan speeds using the included remote control. Refer to the Galaxy II fan control box manual for detailed instructions on changing modes, colors, and brightness. The reset button on the top I/O panel may also cycle through ARGB modes if connected to the controller's reset header.

4.3 Sprednja vhodno/izhodna vrata

The top I/O panel provides convenient access to:

• USB Type-C port for modern devices.
• USB 3.0 ports for high-speed data transfer.
• USB 2.0 port for general peripherals.
• HD Audio Jack for headphones and microphones.
• Reset button for system restart.

5. Vzdrževanje

Redno vzdrževanje pomaga zagotoviti dolgo življenjsko dobo in optimalno delovanje komponent vašega računalnika.

• Filtri za prah: The Elysium II case is equipped with removable dust filters. Periodically remove and clean these filters (e.g., with compressed air or by washing with water and drying thoroughly) to prevent dust buildup inside the case, which can impede airflow and cooling.
• Čiščenje zunanjosti: Uporabite mehko, damp cloth to wipe down the exterior surfaces, including the tempered glass panels. Avoid abrasive cleaners or solvents that could damage the finish.
• Čiščenje notranjosti: With the system powered off and unplugged, use compressed air to remove dust from internal components, especially fan blades and heatsinks.

6. Odpravljanje težav

If you encounter issues with your PC case, consider the following common problems and solutions:

• Brez napajanja:
  • Prepričajte se, da je napajalnik pravilno priključen v stensko vtičnico in da je stikalo za vklop na napajalniku v položaju »VKLOP«.
  • Verify that the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard.
  • Preverite, ali je kabel gumba za vklop na sprednji plošči pravilno priključen na sprednjo ploščo matične plošče.
• Ventilatorji se ne vrtijo / RGB se ne prižge:
  • Confirm that all fans are properly connected to the fan control boxes.
  • Ensure the fan control boxes are receiving power from the PSU (usually via SATA power connector).
  • Check that the ARGB cables from the control boxes are connected to the motherboard's ARGB header (if applicable) or that the remote control is functioning and has fresh batteries.
• Sprednja vrata USB ne delujejo:
  • Verify that the USB 3.0, USB 2.0, and USB Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.
• No Audio from Front Jack:
  • Prepričajte se, da je kabel HD Audio na sprednji plošči pravilno priključen na avdio priključek na matični plošči.

For persistent issues, consult the Xigmatek support webspletno mesto ali se obrnite na službo za stranke.

7. Garancija in podpora

Xigmatek products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Xigmatek webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.