1. Uvod
The Graphtec CE8000-60 Plus is a high-performance 24-inch cutter plotter designed to enhance production efficiency across various applications, including signage, vinyl graphics, DTF apparel, print & cut, POP & packaging, and automotive markets. This manual provides essential information for the proper setup, operation, and maintenance of your Graphtec CE8000-60 Plus to ensure optimal performance and longevity.
Figure 1.1: Graphtec CE8000-60 Plus 24" Cutter Plotter with media loaded, demonstrating its primary function.
2. Varnostne informacije
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe in škodo na opremi:
- Ensure the plotter is placed on a stable, level surface.
- Priključite napajalni kabel v ozemljeno vtičnico.
- Keep hands and loose clothing away from moving parts, especially the cutting blade and pinch rollers, during operation.
- Do not attempt to disassemble or repair the plotter yourself. Refer to qualified service personnel.
- Use only Graphtec-approved accessories and replacement parts.
- Unplug the plotter from the power source before cleaning or performing maintenance.
3. Kaj je v škatli
Ob razpakiranju preverite, ali so prisotne vse komponente:
- Graphtec CE8000-60 Cutter Plotter Unit
- Stojalo za stroj
- Updated CB09UB Blade Holder
- Standard Blade (for vinyl up to 0.25mm thick)
- Roll Media Holder
- Tool & Accessory Holder
- Napajalni kabel
- USB priključni kabel
- Graphtec Studio 2 Design Software (License/Installation Media)
- Cutting Master 5 Plug-in for Adobe Illustrator and CorelDraw (License/Installation Media)
- Cutting Blade Manual
- Studio CE8000 Machine Training Videos (Access Information)
- 5 Design Cards for Artwork (SVGs, JPGs, Monograms, Commercial Use)
Slika 3.1: Konecview of the components included with the Graphtec CE8000-60 Plus.
4. Nastavitev
4.1 Assembling the Machine Stand
Follow the instructions provided in the separate assembly guide for the machine stand. Ensure all bolts are securely tightened for stability.
Figure 4.1: The Graphtec CE8000-60 Plus plotter fully assembled on its dedicated stand.
Slika 4.2: stran view of the machine stand, highlighting its sturdy construction.
4.2 Namestitev programske opreme
Install the provided Graphtec Studio 2 design software and Cutting Master 5 plug-in on your computer. Refer to the respective software installation guides for detailed steps. Cutting Master 5 integrates with Adobe Illustrator and CorelDraw for direct cutting from your design application.
4.3 Povezljivost
The CE8000-60 Plus supports both USB and Wireless LAN connectivity.
- USB povezava: Connect the plotter to your computer using the supplied USB cable.
- Brezžični LAN: Utilize the new Wireless LAN capability for flexible placement and seamless connectivity. Refer to the plotter's on-screen menu for Wi-Fi setup instructions.
4.4 Nalaganje medijev
Carefully load your desired media (e.g., vinyl, heat transfer film) onto the roll media holder. Ensure the media is aligned straight and secured by the pinch rollers. The newly developed Media Set Assist Function helps in holding the media stable and preventing feeding problems.
5. Navodila za uporabo
5.1 Konec nadzorne ploščeview
The CE8000-60 Plus features a touch screen and mechanical keys for intuitive operation. Familiarize yourself with the menu structure for easy navigation.
Figure 5.1: The plotter's control panel, showing the touch screen display and navigation buttons.
| Gumb/Ikona | funkcija |
|---|---|
| POVEZAVA | Manages connection settings (USB, LAN). |
| ORODJE | Adjusts cutting tool settings (force, speed, offset). |
| ARMS | Configures Automatic Registration Mark Sensing settings. |
| OBMOČJE | Defines the cutting area. |
| MEDIJI | Manages media settings (type, size). |
| KONFIG | Accesses general plotter configurations. |
| INFO | Displays plotter information (firmware version, serial number). |
| POČASI | Reduces cutting speed for precise adjustments. |
| POBEŽI | Cancels current operation or returns to previous menu. |
| ENTER | Potrdi izbiro ali odpre meni. |
5.2 Basic Cutting Operation
- Prepare your design in Graphtec Studio 2 or your preferred design software (e.g., Adobe Illustrator, CorelDraw) using the Cutting Master 5 plug-in.
- Load the media onto the plotter, ensuring it is straight and secured by the pinch rollers. Adjust pressure adjustable push rollers as needed.
- Set the origin point on the plotter using the control panel.
- Send the cutting data from your computer to the plotter.
- Monitor the cutting process. The CE8000 boasts a 450 gf cutting force and 39"/s cutting speed for efficient operation.
- Once cutting is complete, unload the media.
5.3 Using ARMS (Automatic Registration Mark Sensing)
The reliable Registration Mark Sensing System (ARMS) ensures precise contour cutting of pre-printed graphics. This is crucial for applications like print & cut.
- Ensure your printed graphic includes the necessary registration marks.
- Load the printed media onto the plotter.
- From the control panel, select the ARMS function. The plotter will automatically detect the registration marks.
- Once marks are detected, send the cutting data. The plotter will adjust the cutting path based on the detected marks for accurate alignment.
Figure 5.2: The cutting head precisely reading registration marks on printed media for accurate contour cutting.
6. Vzdrževanje
Regular maintenance ensures the longevity and optimal performance of your plotter.
- Čiščenje: Regularly clean the plotter's exterior with a soft, dry cloth. Use a brush or compressed air to remove dust and debris from the cutting area and around the pinch rollers.
- Zamenjava rezila: Replace the cutting blade when you notice a decrease in cutting quality or when the blade becomes dull. Refer to the Cutting Blade Manual for detailed instructions on how to safely replace the CB09UB blade.
- Stiskalni valjčki: Keep the pinch rollers clean and free of adhesive residue to ensure proper media feeding.
- Posodobitve vdelane programske opreme: Periodically check for integrated firmware updates to ensure your plotter has the latest features and performance enhancements.
7. Odpravljanje težav
This section addresses common issues you might encounter. For more complex problems, contact Graphtec support.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Rezalnik se ne odziva | Loose cable connection, power off, software issue. | Check power and USB/LAN connections. Restart plotter and computer. Verify software settings. |
| Slaba kakovost rezanja | Dull blade, incorrect cutting force/speed, media issues. | Replace blade. Adjust cutting force and speed settings. Ensure media is flat and properly loaded. |
| Media slipping during cut | Insufficient pinch roller pressure, dirty rollers, media not aligned. | Increase pinch roller pressure. Clean rollers. Re-load media, ensuring proper alignment. |
| ARMS not detecting marks | Poorly printed marks, lighting conditions, sensor obstruction. | Ensure marks are clear and high contrast. Check lighting. Clean ARMS sensor. |
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | CE8000-60-BASE-1 |
| Širina reza | 24 palcev |
| Max. Cutting Force | 450 gf |
| Maks. hitrost rezanja | 39 inches/second (1000 mm/s) |
| Povezljivost | USB, Wireless LAN |
| Registration Mark System | ARMS (Automatic Registration Mark Sensing) |
| Nadzorna plošča | Touch Screen and Mechanical Keys |
| Priložena programska oprema | Graphtec Studio 2, Cutting Master 5 |
| Material | Kovina |
| Način delovanja | Avtomatsko, Ročno |
| Proizvajalec | Graphtec America |
9. Aplikacije
The Graphtec CE8000-60 Plus is versatile and suitable for a wide range of cutting applications:
- Signage and Vinyl Graphics
- DTF (Direct-to-Film) Apparel
- Print & Cut Applications
- POP (Point of Purchase) Displays & Packaging
- Automotive Markets (e.g., Paint Protection Film, Window Tinting Film)
- Oznake po meri
Figure 9.1: Diverse applications including apparel, print & cut, vinyl decals, and paint protection film.
Figure 9.2: Additional applications such as window signage, packaging, custom labels, and window tinting.
10. Garancija in podpora
For warranty information, please refer to the documentation provided with your purchase or visit the official Graphtec America website. For technical support, software updates, or service inquiries, please contact Graphtec America customer service directly.
Graphtec America Contact Information: Prosimo, glejte uradne podatke proizvajalca webNajnovejše kontaktne podatke najdete na spletnem mestu ali v dokumentaciji, ki je priložena izdelku.
