1. Uvod
The Pedrollo TOP 2 submersible pump is designed for pumping clear water without abrasive particles. This 0.5 HP, 115 Volt pump is engineered for ease of use and reliable operation, featuring total motor cooling and a double mechanical seal on the shaft for enhanced safety and durability.
It is particularly suitable for emergency draining of small flooded areas such as basements, garages, and fountains, as well as for emptying containers or water tanks, and draining water from dishwashers and washing machines.
2. Varnostne informacije
Always prioritize safety when operating electrical equipment, especially with water. Read and understand all instructions before installation and use.
- Električna povezava: Ensure the power supply matches the pump's specifications (115 Volts). Connect the pump to a properly grounded outlet with a residual current device (RCD) for protection against electric shock.
- Kakovost vode: This pump is designed for clear water. Do not use it for pumping flammable liquids, corrosive chemicals, or water containing large abrasive particles.
- Temperaturne omejitve: The maximum liquid temperature for continuous operation is +40 °C. For intermittent use, the pump can handle temperatures up to +40 °C for a maximum period of 3 minutes.
- Ravnanje: Always use the integrated handle for lifting and lowering the pump. Never pull the pump by its power cable or discharge hose.
- Otroci in hišni ljubljenčki: Keep children and pets away from the pump and the area of operation.
- Vzdrževanje: Pred kakršnim koli vzdrževanjem ali čiščenjem črpalko izključite iz električnega omrežja.
3. Nastavitev in namestitev
Pravilna namestitev je ključnega pomena za delovanje in dolgo življenjsko dobo črpalke.
3.1 Razpakiranje in pregled
Carefully remove the pump from its packaging. Inspect the pump for any signs of damage during transit. Ensure all components, including the 5-meter power cable and integrated float switch, are present.
Pedrollo TOP 2 Submersible Pump packaging and unit.
3.2 Priključitev izpustne cevi
Attach a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks during operation. The pump is designed to accommodate standard hose sizes.
3.3 Postavitev črpalke
Place the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in the water before starting. The maximum immersion depth for the TOP 2 model is 3 meters.
Pedrollo TOP 2 Submersible Pump showing the integrated handle and float switch.
3.4 Nastavitev plovnega stikala
The pump features an integrated float switch for automatic start and stop. The float switch activates the pump when the water level rises and deactivates it when the water level drops to a certain point. Ensure the float switch can move freely without obstruction to function correctly.
4. Delovanje
Once installed, operating the Pedrollo TOP 2 pump is straightforward.
4.1 Zagon črpalke
After ensuring the pump is correctly positioned and submerged, plug the power cable into a suitable electrical outlet. The integrated float switch will automatically start the pump when the water level reaches the activation point.
4.2 Samodejno delovanje
The float switch will automatically turn the pump on and off based on the water level. This feature is ideal for continuous monitoring and draining of fluctuating water levels. The pump will continue to operate until the water level drops to the minimum emptying level of 14 mm from the bottom.
4.3 Zaustavitev črpalke
To manually stop the pump, simply unplug it from the power outlet. The pump will also stop automatically once the water level falls below the float switch's deactivation point.
5. Vzdrževanje
Redno vzdrževanje zagotavlja optimalno delovanje in podaljšuje življenjsko dobo vaše črpalke.
- Čiščenje: Periodically clean the pump's exterior to remove any debris or sediment. Ensure the intake area is clear of obstructions.
- Preverjanje plovnega stikala: Regularly check that the float switch moves freely and is not obstructed by debris.
- Pregled rotorja: If the pump's performance decreases, inspect the impeller for blockages. The pump can handle solid particles up to Ø 10 mm. Larger particles may cause damage or blockages.
- Shranjevanje: If storing the pump for an extended period, especially in freezing conditions, ensure it is completely drained of water to prevent damage. Store in a dry, protected area.
6. Odpravljanje težav
This section addresses common issues you might encounter with your Pedrollo TOP 2 pump.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Črpalka se ne zažene | Brez napajanja Plovno stikalo ni aktivirano Preobremenitev motorja | Preverite priključek za napajanje in odklopnik Ensure water level is high enough to activate float Pustite, da se motor ohladi; preverite morebitne ovire |
| Nizek ali nič pretoka vode | Discharge hose kinked or blocked Pump intake blocked Impeller damaged or clogged | Check and clear hose Clean pump intake screen Disconnect power and inspect/clean impeller |
| Črpalka deluje neprekinjeno | Plovno stikalo se je zataknilo v položaju 'vklopljeno' Stalni dotok vode | Check float switch for obstructions Verify the source of water inflow |
Če težave po poskusu teh rešitev ne izginejo, se obrnite na usposobljeno servisno osebje.
7. Specifikacije
Technical details for the Pedrollo TOP 2 Submersible Pump.
Od blizu view of the Pedrollo TOP 2 Submersible Pump, highlighting the technical label.
- Model: TOP 2
- moč: 0.5 KM
- voltage: 115 volta
- Največja globina potopitve: 3 metrov
- Najvišja temperatura tekočine: +40 °C (for max 3 minutes)
- Sphere Passage (Max Particle Size): Ø 10 mm
- Maximum Emptying Level: 14 mm from the bottom
- Material: Lito železo
- vir energije: Electric cable (5m length supplied)
- Vključene komponente: Integrated float for automatic start/stop
- Dimenzije (paket): 31.6 x 20.9 x 19.5 cm
- Teža (paket): 5.32 kg
- Največja višina dviga: 3 metrov
8. Uradni videoposnetki izdelkov
No official product videos specifically for the Pedrollo TOP 2 submersible pump from a 'Seller' creator type were found in the provided data. The available video is for a different product (Truper submersible pump) and is therefore not included.
9. Garancija in podpora
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Pedrollo customer service directly. Keep your purchase receipt as proof of purchase.
