Priročniki+

PGST PB-68

Uporabniški priročnik za senzor vrat in oken PGST PB-68

Model: PB-68

Uvod

The PGST PB-68 Door and Window Sensor is a crucial component of your PGST Home Security System, designed to detect unauthorized entry through doors and windows. This sensor operates by detecting the separation of its two main parts, triggering an alarm signal to your connected PGST alarm host and sending notifications to your smartphone. It provides real-time monitoring and enhances the security of your home or property.

Pomembno: This sensor requires a PGST alarm host to function correctly and is compatible only with the PGST home security system.

Vsebina paketa

  • 1 x PGST PB-68 Door and Window Sensor (main unit and magnetic contact)
  • 1 x litij-ionska baterija (predhodno nameščena)
  • 1 x Double-sided Adhesive Tape for installation

Nastavitev

Zahteve za namestitev

  • A functional PGST alarm host (required for operation).
  • A clean, dry surface for mounting the sensor.

Koraki namestitve

  1. Pripravite površino: Clean the desired mounting area on your door or window frame and the corresponding moving part (door/window) to ensure proper adhesion.
  2. Pritrdite lepilni trak: Apply the provided double-sided adhesive tape to the back of both the main sensor unit and the magnetic contact.
  3. Namestite glavno enoto: Mount the larger sensor unit onto the fixed frame of the door or window.
  4. Mount the Magnetic Contact: Mount the smaller magnetic contact onto the moving part of the door or window (the door itself or the window sash).
  5. Poravnaj komponente: Ensure that the main sensor unit and the magnetic contact are aligned horizontally and are less than 10 mm (approximately 0.4 inches) apart when the door or window is closed. Proper alignment is critical for correct operation.
  6. Testna namestitev: Open and close the door or window several times to verify that the sensor triggers and resets correctly. Confirm that your PGST alarm host registers the sensor's status changes.
PGST PB-68 Door and Window Sensor components, showing the main sensor unit and the magnetic contact.
This image displays the two main components of the PGST PB-68 Door and Window Sensor: the larger sensor unit and the smaller magnetic contact. These two parts are designed to be mounted adjacent to each other on a door or window frame, with a small gap between them when the door/window is closed.

Navodila za uporabo

Funkcionalnost

  • Zaznavanje: When the door or window to which the sensor is attached is opened, the main sensor unit and the magnetic contact separate. This separation triggers the sensor.
  • Sprožilec alarma: Upon being triggered, the sensor sends a signal to your connected PGST alarm host. The alarm host will then activate its siren (if armed) and initiate any programmed actions, such as sending notifications.
  • Spremljanje v realnem času: Through the PGST application on your smartphone, you can monitor the real-time status of your doors and windows (open or closed) 24 hours a day, 7 days a week. You will receive alarm signals on your mobile phone within seconds of a trigger event.

Pairing with PGST Alarm System

Refer to your PGST alarm host's user manual for specific instructions on how to add new sensors to the system. Generally, this involves putting the alarm host into pairing mode and then triggering the sensor (e.g., by separating its two parts) to register it with the system. The process is typically managed through the PGST mobile application.

Vzdrževanje

Zamenjava baterije

The PGST PB-68 sensor comes with a pre-installed Lithium Ion battery. When the battery level is low, your PGST alarm host or mobile application will typically notify you. To replace the battery:

  1. Carefully detach the main sensor unit from its mounting surface.
  2. Open the battery compartment (refer to the sensor's casing for specific opening mechanism, usually a small latch or screw).
  3. Remove the old Lithium Ion battery.
  4. Insert a new 3.7V Lithium Ion battery, ensuring correct polarity.
  5. Zaprite predal za baterije in ponovno namestite senzor.
  6. Test the sensor to ensure it is functioning correctly with the alarm system.

Čiščenje

Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Odpravljanje težav

TežavaMožen vzrokrešitev
Sensor not triggering alarm.
  • Incorrect alignment of sensor and magnet.
  • Sensor not paired with alarm host.
  • Prazna ali prazna baterija.
  • Alarm system not armed.
  • Ensure the gap between the sensor and magnet is less than 10 mm when closed.
  • Refer to your alarm host manual to pair the sensor.
  • Zamenjajte baterijo.
  • Arm your PGST alarm system.
No notifications on smartphone.
  • Sensor not triggering.
  • Smartphone app not configured for notifications.
  • Internet connection issues with alarm host or smartphone.
  • Troubleshoot sensor triggering (see above).
  • Check app settings for notification permissions and preferences.
  • Verify internet connectivity for both your alarm host and smartphone.
Sensor frequently triggers falsely.
  • Sensor and magnet too far apart or loose.
  • Vibrations or movement causing slight separation.
  • Re-align and re-secure the sensor and magnet, ensuring a firm attachment.
  • Consider a more stable mounting location if possible.

Specifikacije

Številka modelaPB-68
Senzorska tehnologijaKontaktni senzor
Vir napajanjaNapajanje na baterije
Vrsta baterije1 x litij-ionska baterija (priložena)
voltage3.7 voltov (DC)
MaterialPlastika
Način namestitveSamolepilni
Vrsta namestitveŠtrleče
Dimenzije izdelka2.95 x 1.96 x 2.16 palcev
Teža predmeta1.44 unč
Združljive napravePGST Home Security System, Smartphone (via app)

Garancija in podpora

For warranty information, technical support, or further assistance with your PGST PB-68 Door and Window Sensor, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to customer experience and continuously improving its products and services.

Več informacij in stik s podporo lahko najdete tudi prek Trgovina PGST na Amazonu.

Povezani dokumenti - PB-68

Prejview Uporabniški priročnik za senzor vrat in oken PGST WIFI
Uporabniški priročnik za senzor vrat in oken PGST WIFI, ki podrobno opisuje njegove funkcije, delovanje, namestitev in specifikacije. Vključuje informacije o skladnosti s predpisi FCC.
Prejview Pametni alarmni sistem PGST - Navodila za uporabo in podpora
Začnite uporabljati pametni alarmni sistem PGST (PG-103, PG107). Ta priročnik vsebuje navodila za uporabo, kontaktne podatke za podporo in informacije o večjezičnih virih za domačo varnost.
Prejview Uporabniški priročnik za GSM in WiFi alarmni sistem
Uporabniški priročnik za GSM in WiFi alarmni sistem, ki podrobno opisuje funkcije, nastavitev, delovanje in integracijo mobilne aplikacije za alarmni gostitelj PG103.
Prejview Wireless Smoke Alarm Detector User Manual (PG-S11W WIFI)
Comprehensive user manual for the PG-S11W WIFI Wireless Smoke Alarm Detector, covering product overview, technical parameters, installation, usage guide, troubleshooting, maintenance, and storage.
Prejview Uporabniški priročnik za PGST PG-500 GSM 2G/4G/WiFi alarmni sistem
Podroben uporabniški priročnik za alarmni sistem PGST PG-500 GSM 2G/4G/WiFi. Zajema namestitev, nastavitev in delovanje mobilne aplikacije, sistemske nastavitve, vsakodnevno uporabo, vzdrževanje, tehnične specifikacije in odpravljanje težav.
Prejview PGST PG-109 Alarm Host Uporabniški priročnik
Obsežen uporabniški priročnik za varnostni sistem PGST PG-109 Alarm Host, ki zajema namestitev, delovanje, funkcije, kot so daljinski upravljalnik, brezžični detektorji, integracija aplikacij in tehnične specifikacije.