1. Uvod
The BEA Falcon is a sophisticated unidirectional motion sensor engineered to optimize the performance of automatic industrial doors. This sensor is designed to detect various targets and can be configured to filter out people, allowing for vehicle-only detection. This capability helps reduce door closing cycles by ignoring cross-traffic, leading to energy savings and improved operational efficiency.
The Falcon XL model, specifically, is suitable for mounting heights between 2 meters and 3.5 meters, providing a typical detection area of 4 x 2 meters. Its robust design ensures immunity against vibrations and environmental interferences, making it ideal for demanding industrial environments.
Slika 1: Spredaj view of the BEA Falcon XL Industrial Door Sensor. This image shows the compact, black housing of the sensor, designed for robust industrial applications.
2. Ključne značilnosti
- Energy-saving Unidirectional Motion Detection: Optimizes door closing cycles by detecting motion in one direction, contributing to significant energy savings.
- People Filter: Allows configuration to detect vehicles only, ignoring pedestrian traffic, which is crucial for specific industrial applications.
- Cross-traffic Filter: Eliminates unwanted detections from traffic moving perpendicular to the door, enhancing operational accuracy.
- Plug & Play namestitev: Simplifies setup with basic functions adjustable via push buttons or remote control.
- Rugged Housing: Designed with IP65 degree of protection, ensuring durability and resistance to dust and water ingress in harsh industrial environments.
- Imuniteta: Provides strong immunity against vibrations and environmental interferences, ensuring reliable performance.
3. Sestavni deli izdelka
The BEA Falcon sensor consists of several key components designed for easy installation and reliable operation. Refer to the diagram below for an overview of the main parts.
Figure 2: Diagram illustrating the main components of the BEA Falcon XL sensor.
- Push Buttons: For basic function adjustments.
- Front Face: The primary detection surface.
- Radar Antenna: Emits and receives microwave signals.
- Angle Indication: Visual indicator for tilt angle adjustment.
- Bracket: Mounting hardware for secure installation.
- Cable: For power and signal connection.
4. Nastavitev in namestitev
The BEA Falcon XL sensor is designed for straightforward installation. Proper mounting and wiring are crucial for optimal performance and safety. It is recommended that installation be performed by qualified personnel.
4.1 Premisleki glede montaže
- Montažna višina: For the Falcon XL, the recommended mounting height is between 2 meters and 3.5 meters.
- Lokacija: Mount the sensor in a position that provides an unobstructed view of the detection area, typically above the industrial door.
- Prilagoditev kota: Utilize the adjustable bracket and angle indication to precisely aim the sensor's detection field. The sensor allows for 0° to 180° vertical tilt angles.
4.2 Ožičenje in napajanje
- Napajanje: The sensor operates on 12 V to 24 V AC ±10% (50 - 60 Hz) or 12 V to 24 V DC +30% / -10%. Ensure the power source matches these specifications.
- Izhodna povezava: The sensor provides a relay output (free of potential change-over contact). Connect this to the door control system according to the system's requirements. Max. contact voltage: 30V AC/42V DC, Max. contact current: 1A (resistive), Max. switching power: 30 W.
- Dolžina kabla: The sensor comes with a cable length of 10 or 15 meters for flexible installation.
4.3 Začetna konfiguracija
Basic functions can be adjusted using the integrated push buttons or a compatible remote control. Refer to the detailed product manual (not provided in this summary) for specific programming steps for features like people filtering and cross-traffic filtering.
Figure 3: Illustration of the detection fields for the BEA Falcon sensor in an industrial door application. This diagram shows how the sensor can differentiate between pedestrian and vehicle traffic, optimizing door operation.
5. Delovanje
Once properly installed and configured, the BEA Falcon XL sensor operates autonomously to detect motion within its defined field. The sensor's LED indicator provides visual feedback on its status.
5.1 Detection Mode
The sensor operates in motion detection mode. It identifies moving objects within its detection zone and triggers the door opening mechanism based on the configured parameters (e.g., presence of vehicles only).
5.2 LED indikatorji
- Rdeča LED: Indicates detection state and parameter indication.
- Zelena LED: Indicates value indication during configuration.
5.3 Optimizacija zmogljivosti
To ensure optimal performance, regularly verify that the detection field is clear of obstructions and that the sensor's lens is clean. The unidirectional detection and filtering capabilities contribute to efficient door operation and energy conservation.
6. Vzdrževanje
The BEA Falcon XL sensor is designed for minimal maintenance due to its robust construction and IP65 rating. However, periodic checks are recommended to ensure continued optimal performance.
- Čiščenje: Periodically clean the sensor's front face and housing with a soft, damp krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Pregled: Visually inspect the mounting bracket and cable for any signs of wear, damage, or loosening. Ensure all connections are secure.
- Test funkcionalnosti: Regularly test the sensor's detection capabilities by simulating traffic to ensure it triggers the door correctly and that filtering functions are active as configured.
No user-serviceable parts are inside the sensor housing. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for any repairs.
7. Odpravljanje težav
This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified technician.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Senzor ne zaznava gibanja. | No power; obstructed detection field; incorrect sensitivity settings; sensor malfunction. | Check power supply and connections. Clear any obstructions. Adjust sensitivity settings. If problem persists, contact support. |
| Door opens for unwanted traffic (e.g., pedestrians). | People filter not activated or incorrectly configured; cross-traffic filter not active. | Verify and adjust the people filter and cross-traffic filter settings using push buttons or remote control. |
| LED indikator ne sveti. | No power; faulty LED; internal issue. | Check power supply. If power is present and LED remains off, the unit may require service. |
| Intermittent detection. | Loose wiring; environmental interference; sensor position shifted. | Inspect wiring connections. Ensure sensor is securely mounted and not vibrating. Check for new sources of interference. |
8. Tehnične specifikacije
| Parameter | Vrednost |
|---|---|
| tehnologija | Mikrovalovni Dopplerjev radar |
| Frekvenca oddajnika | 24.150 GHz |
| Sevana moč oddajnika | <20 dBm EIRP |
| Gostota moči oddajnika | <5 mW/cm² |
| Način zaznavanja | Gibanje |
| Detection Zone (FALCON XL) | 4 x 2 m (typical at 30° and field size 9) |
| Min. Hitrost zaznavanja | 5 cm/s |
| Dobava Voltage | 12 V to 24 V AC ±10% (50 - 60 Hz); 12 V to 24 V DC +30% / -10% |
| Največja poraba energije | <2 W |
| Izhodni rele | Free of potential change-over contact |
| maks. Kontakt Voltage | 30V AC / 42V DC |
| maks. Kontakt Current | 1A (uporovni) |
| maks. Preklopna moč | 30 W |
| LED signal | Red: detection state, parameter indication; Green: value indication |
| Mounting Height (FALCON XL) | 2 m - 3.5 m |
| Stopnja zaščite | IP65 (IEC/EN 60529) |
| Temperaturno območje | -30 °C do +60 °C |
| Dimenzije (D x V x Š) | 127 mm x 102 mm x 96 mm |
| Koti nagiba | 0° to 180° vertical |
| Materiali | ABS and Polycarbonate |
| Teža | 400 g |
| Dolžina kabla | 10 ali 15 m |
9. Varnostne informacije
Always observe the following safety precautions during installation, operation, and maintenance of the BEA Falcon XL sensor:
- Kvalificirano osebje: Installation and servicing should only be performed by qualified and authorized personnel.
- Odklop napajanja: Always disconnect power to the door system and sensor before performing any installation, wiring, or maintenance.
- Električna varnost: Adhere to all local and national electrical codes. Ensure proper grounding and wiring.
- Okoljski pogoji: Do not expose the sensor to conditions outside its specified temperature and protection ratings.
- Originalni deli: Uporabljajte samo originalne ali odobrene nadomestne dele.
10. Garancija in podpora
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your authorized BEA distributor. Keep your purchase receipt as proof of purchase.
