Globo Lighting BOSTON Outdoor Pedestal Light

1. Uvod

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Varnostna navodila

• Električna varnost: Namestitev mora opraviti usposobljen električar v skladu z vsemi lokalnimi in nacionalnimi električnimi predpisi. Pred namestitvijo, vzdrževanjem ali zamenjavo žarnice vedno izklopite glavno stikalo.
• Zunanja uporaba: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Vrsta žarnice: Uporabljajte samo žarnice E27 z navedeno močjo.tage. Ne prekoračite največje vattage naveden na napeljavi.
• Ravnanje: Z napravo ravnajte previdno. Pazite, da vam ne pade ali da je ne izpostavljate močnim udarcem.
• Čiščenje: Ne uporabljajte abrazivnih čistil ali topil. Čistite z mehko,amp krpo.
• Toplota: Preden poskusite zamenjati žarnico, jo pustite, da se popolnoma ohladi.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x montažna podlaga
• 1x Set of Mounting Hardware (screws, anchors)
• 1x uporabniški priročnik

Note: E27 bulb is not typically included and must be purchased separately.

4. Specifikacije

5. Nastavitev in namestitev

Pomembno: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Izberite lokacijo: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Priprava ožičenja: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Namestite osnovo: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Povežite električne žice: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Namestite žarnico: Insert a suitable E27 bulb (not included) into the lamp nosilec. Ne zategnite preveč.
6. Varna naprava: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Obnovi moč: Ko je namestitev končana in so vse povezave varne, ponovno vzpostavite napajanje na glavnem odklopniku.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Navodila za uporabo

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Vklop: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Senzor gibanja: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Samodejno izklop: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Vzdrževanje

• Čiščenje: Napeljavo redno čistite z mehko, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Zamenjava žarnice:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Preden se stare žarnice dotaknete, pustite, da se popolnoma ohladi.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Obnovi moč.
• Pregled: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Odpravljanje težav

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garancija in podpora

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Kontaktne podatke običajno najdete na embalaži izdelka ali na uradni spletni strani proizvajalca. webmesto.