1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the GODIYMODULES Tube Preamp Switch Power Supply. This power supply is designed for use with tube preamplifiers in ventil amplifiers, offering stable and clean power output.
Key features include an all-aluminum alloy shell with a stainless steel shield for electromagnetic interference reduction, a 5V Bluetooth decoder board power interface, and high-voltage delay synchronous rectification to minimize current impact on tubes.
2. Varnostni ukrepi
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo na napravi:
- Ensure the power supply is disconnected from the main power source before making any connections or adjustments.
- Naprave ne izpostavljajte vlagi ali ekstremnim temperaturam.
- Uporabite samo določen vhodni voltage razpon (95V-265V).
- Handle with care, especially when working with high voltage komponente.
- Installation should be performed by individuals familiar with electronic circuits and safety practices.
3. Izdelek je končanview
The GODIYMODULES Tube Preamp Switch Power Supply is a compact and robust power solution for audio applications. It features a shielded design and multiple output voltages.
3.1. Komponente in funkcije
- All-aluminum alloy shell and stainless steel shield: Provides excellent electromagnetic interference (EMI) shielding.
- 5V Bluetooth decoder board power interface: Convenient for integrating additional audio components.
- Visoka glasnosttage delay synchronous rectification: Reduces current impact during startup, protecting vacuum tubes. The delay is approximately 30 seconds and can be adjusted.
- Selectable High Voltage Izhod: User can select between 250V or 280V output.
- Filament Output: Provides 6.3V for tube filaments.
3.2. Vsebina paketa
Paket vključuje:
- 1 x Tube Preamp Switch Power Supply Module
4. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Vhodna voltage | 95V-265V AC |
| Visoka glasnosttage Izhod | 250V or 280V DC (selectable) |
| Filament Voltage Izhod | 6.3 V AC |
| Pomožni izhod | 5V DC (for Bluetooth decoder board) |
| Funkcija zakasnitve | Approx. 30 seconds (adjustable) |
| Zaščita | All-aluminum alloy shell, stainless steel shield |
| Dimenzije | 3.94 x 2.28 x 1.26 palcev (10 x 5.8 x 3.2 cm) |
| Teža | 7.05 unč (0.2 kg) |
5. Nastavitev in namestitev
Follow these steps for proper installation of the power supply module into your audio system. It is recommended to have experience with electronics for this process.
5.1. Identifying Connections
Figure 5.1: Connection Diagram of the Power Supply Module.
This image illustrates the various connection points on the power supply module. Key labels include "Power input 110-220V" for AC input, "Lamp is filament 6.3V" for the filament supply, and "Output 250V or 280V" for the high voltage DC output. Ground (GND) connections are also clearly marked.
- Vhodna moč (110–220 V): Connect your AC mains power here. This module supports a wide input range from 95V to 265V.
- Filament Output (6.3V): Connect this to the filament pins of your vacuum tubes.
- Visoka glasnosttage Output (250V/280V): Connect this to the anode (plate) supply of your vacuum tubes.
- GND: Common ground connections for all outputs.
- 5V izhod: A dedicated 5V output is available for powering a Bluetooth decoder board or similar low-power accessories.
5.2. Visoka zvtage Izbira izhoda
The module allows selection between 250V and 280V for the high voltage output. This is typically done via a jumper or switch on the board. Refer to the diagram (Figure 5.1) for the exact location of the selection jumper.
- To select 250V output, position the jumper accordingly.
- To select 280V output, position the jumper accordingly.
Pomembno: Ensure the power supply is completely disconnected from the mains before changing the high voltage output selection.
5.3. Montaža
The module features mounting holes for secure installation within an enclosure. Use appropriate screws and standoffs to prevent short circuits and ensure proper ventilation.
Slika 5.2: Pod kotom view of the power supply module.
This image provides an angled perspective of the power supply module, highlighting its robust all-aluminum alloy shell and stainless steel shield. The mounting tabs with pre-drilled holes are visible, indicating how the unit can be securely fastened within an amplifier chassis or enclosure.
Slika 5.3: Spredaj view of the power supply module.
Ta slika prikazuje neposredno fronto view of the power supply module, emphasizing the perforated metal shield that covers the internal components. The green terminal blocks for connections are visible on the sides.
Slika 5.4: Alternativni kot view of the power supply module.
Ta slika ponuja še en kot view of the power supply module, similar to Figure 5.2, further illustrating the compact design and the protective metal casing.
Figure 5.5: Internal components of the power supply module.
Ta slika prikazuje pogled od zgoraj navzdol view of the power supply module with its shield removed, revealing the internal circuit board, transformer, capacitors, and other electronic components. This view is useful for understanding the layout and identifying specific parts.
Slika 5.6: Spodaj view of the power supply module.
This image displays the bottom side of the power supply module, showing the solid metal base and additional mounting points. This view confirms the robust construction and provides insight into how the unit can be mounted from below.
6. Navodila za uporabo
Once the power supply is correctly installed and connected to your tube amplifier circuit, operation is straightforward.
- Preverite povezave: Double-check all wiring connections to ensure they are secure and correct according to the setup instructions.
- Uporabi moč: Connect the AC input to a suitable power outlet (95V-265V).
- Observe Delay: Visoka voltage output will engage after a delay of approximately 30 seconds. This delay allows the tube filaments to warm up, protecting the tubes from sudden high voltage stres.
- Monitor uspešnosti: After the delay, the amplifier should power on and operate normally. Listen for any unusual noises or signs of malfunction.
The power supply is designed for continuous operation within its specified parameters.
7. Vzdrževanje
The GODIYMODULES Tube Preamp Switch Power Supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance and longevity.
- Čiščenje: Ensure the module is kept clean and free of dust. Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
- Prezračevanje: Ensure adequate airflow around the module, especially if it is enclosed. Overheating can reduce component lifespan.
- Preverjanje povezave: Periodically inspect all wiring connections for tightness and signs of corrosion. Loose connections can lead to intermittent operation or damage.
- Vizualni pregled: Look for any signs of physical damage, bulging capacitors, or discoloration on the circuit board, which may indicate a problem.
Opomba: Do not attempt to repair the module yourself if you are not qualified. Contact professional service if issues arise.
8. Odpravljanje težav
This section provides solutions to common issues you might encounter with the power supply module.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Brez izhodne moči | No input power; Incorrect wiring; Blown fuse (internal) | Check AC input connection. Verify all wiring. If suspected internal fuse, seek professional repair. |
| Visoka glasnosttage output not present after delay | Faulty delay circuit; Overload protection activated | Ensure no short circuits in the connected load. Disconnect load and test power supply independently. |
| Humming or noise in audio | Ground loop; Insufficient shielding; Faulty components | Ensure proper grounding. Verify shield cover is correctly installed. Check for loose connections. |
| Nepravilna izhodna voltage | Nepravilna visoka voltage jumper setting; Overload; Component failure | Verify high voltage jumper setting. Reduce load. If problem persists, professional service is required. |
Če naletite na težave, ki niso navedene tukaj, ali če predlagane rešitve ne odpravijo težave, se obrnite na podporo strankam.
9. Garancija in podpora
For warranty information and technical support, please refer to the seller's policy on the platform where the product was purchased. Keep your purchase receipt as proof of purchase.
Manufacturer: GODIYMODULES
ASIN: B0D9VCYBLB