virtavo Universal Adjustable Indoor/Outdoor Security Camera Mounting Bracket (Model XJH-Bracket) Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your virtavo Universal Adjustable Indoor/Outdoor Security Camera Mounting Bracket, Model XJH-Bracket. This bracket is designed to offer flexible positioning for your security cameras, ensuring optimal surveillance coverage.

The virtavo mounting bracket is compatible with various security cameras, including virtavo VistaFlask and SolarFlask models, as well as other cameras with standard mounting interfaces.

2. Vsebina paketa

Prosimo, preverite, ali so v vašem paketu vsi elementi:

• 1x virtavo Universal Adjustable Mounting Bracket (Model XJH-Bracket)
• 1x Set of Mounting Screws and Wall Plugs

Note: Security camera is sold separately.

Image: Two virtavo universal adjustable mounting brackets, showing their design and adjustability.

3. Značilnosti izdelka

• Univerzalna združljivost: Designed to fit a wide range of security cameras, including virtavo VistaFlask and SolarFlask.
• Nastavljiv kot: Offers 360-degree rotation and 90-degree tilt for flexible camera positioning.
• Vzdržljiva konstrukcija: Made from rust-proof aluminum for indoor and outdoor use.
• Enostavna namestitev: Simple screw-in installation for secure mounting on walls or ceilings.

4. Varnostne informacije

• Ensure the mounting surface is strong enough to support the weight of the bracket and camera.
• Use appropriate tools for installation to prevent injury or damage.
• Majhne dele (vijake, čepe) hranite izven dosega otrok.
• If installing outdoors, ensure all connections are weather-sealed if required by your camera model.

5. Nastavitev in namestitev

Follow these steps to properly install your virtavo mounting bracket:

1. Izberite lokacijo: Select a suitable wall or ceiling location that provides the desired camera view and is structurally sound.
2. Označite vrtalne luknje: Place the bracket base against the chosen surface and mark the positions for the drill holes.
3. Vrtanje lukenj: Use an appropriate drill bit to create pilot holes at the marked locations. Insert the provided wall plugs if necessary for your surface type.
4. Secure the Bracket Base: Align the bracket base with the drilled holes and secure it firmly using the provided screws.
5. Pritrditev kamere na nosilec: Screw your security camera onto the threaded post of the mounting bracket. Ensure it is tightened securely.
6. Prilagodi kot: Loosen the adjustment wing nuts on the bracket to set the desired camera angle (up to 360-degree rotation and 90-degree tilt). Tighten the wing nuts firmly once the desired position is achieved.

6. Navodila za uporabo

Once installed, the virtavo mounting bracket allows for easy adjustment of your camera's field of view:

• Prilagoditev nagiba: Loosen the wing nut near the camera attachment point. Tilt the camera up or down to the desired angle. Tighten the wing nut to secure the position.
• Prilagajanje vrtenja: The ball joint allows for 360-degree rotation. Loosen the corresponding wing nut, rotate the camera horizontally, and then tighten to lock.

Always ensure all adjustment points are securely tightened after positioning to prevent the camera from shifting.

Image: A security camera mounted on a wall using the bracket, providing a wide view of a property with a pool.

Image: A security camera mounted outdoors with the bracket, demonstrating its weather-resistant application during rainfall.

7. Vzdrževanje

To ensure the longevity and optimal performance of your mounting bracket:

• Redno čiščenje: Nosilec obrišite z mehko krpoamp krpo, da odstranite prah in umazanijo. Izogibajte se abrazivnim čistilom.
• Preverite tesnost: Periodically check all screws and adjustment points to ensure they remain tight and secure.
• Preverite glede poškodb: Inspect the bracket for any signs of wear, corrosion, or damage, especially if installed outdoors. Replace if necessary.

8. Odpravljanje težav

If you encounter any issues with your mounting bracket, consider the following:

• Camera is Loose: Ensure the camera is fully screwed onto the bracket's threaded post and that all wing nuts are tightened.
• Bracket is Wobbly: Check that the base screws are securely fastened to the wall/ceiling. If installed on drywall, ensure wall plugs are properly seated.
• Težavnost pri nastavljanju kota: Loosen the wing nuts sufficiently before attempting to adjust the angle. Do not force adjustments.

9. Specifikacije

10. Garancija in podpora

For warranty information or technical support, please refer to the official virtavo webspletno mesto ali se obrnite neposredno na službo za stranke. Za uveljavljanje garancije shranite račun.

Kontaktni podatki:

• Proizvajalec: virtavo
• Trgovina Amazon: Visit the virtavo Store