WEELMOTION E1 PRO Electric Scooter for Kids

1. Uvod in varnostne smernice

This manual provides essential information for the safe assembly, operation, and maintenance of your WEELMOTION E1 PRO Electric Scooter. Please read it thoroughly before first use and retain it for future reference.

Pomembne varnostne informacije:

• Med vožnjo vedno nosite čelado in ustrezno varnostno opremo (ščitnike za kolena, ščitnike za komolce).
• Adult supervision is required for children operating this scooter.
• The scooter is designed for riders within the weight range of 40 lbs (18 kg) to 175 lbs (79 kg).
• Do not ride in wet conditions, on uneven surfaces, or at night without proper visibility.
• Seznanite se z lokalnimi zakoni in predpisi glede uporabe električnih skuterjev.
• Pred vsako vožnjo se prepričajte, da so vse komponente varno pritrjene.

Image: A child safely riding the WEELMOTION E1 PRO Electric Scooter outdoors, demonstrating proper use with a helmet.

2. Kaj je v škatli

Upon opening the package, verify that all the following components are present and in good condition:

• WEELMOTION E1 PRO Electric Scooter (main body)
• Handlebars (left and right)
• Napajalnik/polnilec
• imbus ključ
• Uporabniški priročnik (ta dokument)

3. Navodila za nastavitev

Follow these steps to assemble your electric scooter:

Step 1: Set Up Front Stem

1. Gently raise the front stem of the scooter to its upright position.
2. Tighten the folding lock mechanism securely to ensure the stem is fixed in place.

2. korak: Namestitev krmila

1. The locking screws for the handlebars are pre-installed. Unscrew them slightly from the handlebars.
2. Carefully insert each handlebar into the aligned holes on the stem.
3. Use the provided Allen key to tighten the screws firmly, securing the handlebars in place.

4. Navodila za uporabo

Power On/Off & Digital Display

Press the power button on the digital display to turn the scooter on or off. The LED display clearly indicates your current riding speed and battery level.

Image: The digital display on the handlebar, showing speed, battery, and control buttons.

Push Start Function

For rider safety, this scooter features a Push Start function. The acceleration throttle will only engage and activate the motor once the scooter reaches a speed of approximately 3 km/h (actual speed may vary). To start your ride:

1. Postavite eno nogo na ploščad skuterja.
2. Propel forward manually by pushing with your other foot.
3. Once the scooter starts to coast and reaches 3 km/h, use your right-hand thumb to gently push down the throttle.
4. Place both feet onto the deck and enjoy your ride.

Image: Visual guide for the Push Start function.

Zavorni sistem

The scooter is equipped with dual braking systems for maximum safety:

• Sprednja elektronska zavora: Press down gently with your left-hand thumb for quick stops. Apply more pressure for a complete stop.
• Zadnja zavora blatnika: Press down gently with your rear riding foot on the fender to slow down.

Image: Illustration of the dual braking system.

Funkcije osvetlitve

The WEELMOTION E1 PRO features vibrant RGB paddle lights and bright front bar lights. These lights not only illuminate your path but also enhance visibility for others, especially during low-light conditions.

Image: The scooter displaying its vibrant RGB lights.

5. Vzdrževanje

Polnjenje baterije

When the battery level indicated on the digital display is low, connect the scooter to the power adapter. Plug the adapter into a standard electrical outlet. The battery will charge automatically. Avoid overcharging by disconnecting once fully charged.

Čiščenje in shranjevanje

• Obrišite skuter z oglasomamp krpo po uporabi. Izogibajte se uporabi agresivnih kemikalij ali abrazivnih čistil.
• Skuter shranjujte na suhem in hladnem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• The scooter features a durable aluminum frame and is designed to be easily foldable for convenient storage and portability.

Image: The scooter demonstrating its easy folding mechanism for storage.

6. Odpravljanje težav

If you encounter any issues with your WEELMOTION E1 PRO Electric Scooter, please refer to the following common solutions:

• Scooter does not turn on: Ensure the battery is charged. Connect the charger and allow sufficient time for charging.
• Motor does not engage: Remember the Push Start function. The scooter needs to be moving at approximately 3 km/h before the throttle will activate the motor.
• Zmanjšana zmogljivost: Check battery level. Performance may decrease with a low battery. Ensure tires are free from debris.
• Nenavadni zvoki: Inspect all visible parts for loose screws or components. Tighten as necessary. If the noise persists, discontinue use and contact customer support.

For issues not covered here, please contact WEELMOTION customer support.

7. Specifikacije

Key technical specifications for the WEELMOTION E1 PRO Electric Scooter:

Slika: Notranja view highlighting the motor and battery components.

8. Garancija in podpora

WEELMOTION products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your E1 PRO Electric Scooter, please contact WEELMOTION customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer Contact Information: Happy Motion