Axis Communications C1310-E MK II

AXIS C1310-E Mk II Network Horn Speaker

Uporabniški priročnik

1. Uvod

The Axis Communications AXIS C1310-E Mk II Network Horn Speaker is designed for outdoor environments, providing clear audio for various applications. This standalone unit allows for remote warnings, emergency instructions, and general voice messages. It features built-in memory for pre-recorded messages and supports live speak functionality. Digital Signal Processing (DSP) ensures high-quality sound. The speaker integrates easily with network video, access control, analytics, and VoIP systems (supporting SIP) through open standards. Its flexible and scalable design makes it a cost-effective solution for system integration.

Glavne lastnosti vključujejo:

2. Varnostne informacije

Please read all safety instructions before installing or operating the AXIS C1310-E Mk II Network Horn Speaker. Keep this manual for future reference.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

4. Nastavitev

This section outlines the steps for installing and connecting your AXIS C1310-E Mk II Network Horn Speaker.

4.1 Namestitev zvočnika

The AXIS C1310-E Mk II is designed for wall or pole mounting. Ensure the chosen mounting surface is robust enough to support the speaker's weight (approximately 4 pounds) and withstand environmental conditions.

Axis Communications AXIS C1310-E Mk II Network Horn Speaker

An image showing the Axis Communications AXIS C1310-E Mk II Network Horn Speaker, typically mounted on a wall or pole, highlighting its robust design.

  1. Select a suitable mounting location, considering optimal sound coverage and cable routing.
  2. Attach the mounting bracket (if separate) to the desired surface using appropriate screws and anchors.
  3. Secure the speaker to the mounting bracket according to the instructions provided with the bracket.

4.2 Napajanje in omrežna povezava

The speaker connects to your network and receives power via a single Ethernet cable using Power over Ethernet (PoE).

  1. Route an Ethernet cable from a PoE-enabled network switch or PoE injector to the speaker's Ethernet port.
  2. Ensure the cable is properly sealed using the provided grommets to maintain the speaker's waterproof rating.
  3. Once connected, the speaker will power on and attempt to obtain an IP address from your network.

5. Upravljanje zvočnika

The AXIS C1310-E Mk II is managed and operated through a network interface or compatible software/app.

5.1 Začetna konfiguracija

  1. Use Axis IP Utility or a similar network discovery tool to locate the speaker's IP address on your network.
  2. Access the speaker's web vmesnik tako, da vnesete njegov naslov IP v a web brskalnik.
  3. Follow the on-screen prompts to set up administrator credentials and configure basic network settings.

5.2 Upravljanje zvoka

5.3 Integration with Other Systems

The speaker supports open standards for integration with network video, access control, analytics, and VoIP systems (SIP). Refer to the Axis Communications website for detailed integration guides and APIs.

6. Vzdrževanje

Regular maintenance ensures optimal performance and longevity of your AXIS C1310-E Mk II Network Horn Speaker.

7. Odpravljanje težav

V tem razdelku so rešitve za pogoste težave, na katere lahko naletite.

TežavaMožen vzrokrešitev
Ni napajanja/zvočnik se ne vklopiNo PoE power; Faulty Ethernet cable; PoE switch issueVerify PoE source is active; Check Ethernet cable for damage; Test with a different PoE port/injector.
Ni omrežne povezaveIncorrect network settings; Cable issue; Firewall blocking accessCheck IP address configuration; Verify cable connection; Ensure network firewall allows communication.
Ni zvočnega izhodaVolume too low; Muted; Audio source issue; Speaker faultIncrease volume; Unmute speaker; Verify audio source is active; Perform a factory reset if necessary.
Popačen zvokVolume too high; Environmental interference; Speaker damageReduce volume; Check for sources of interference; Contact support if distortion persists.

8. Specifikacije

Technical specifications for the AXIS C1310-E Mk II Network Horn Speaker.

FunkcijaPodrobnost
Ime modelaC1310-E MK II
Vrsta namestitveStenski nosilec
MaterialKovina, plastika
Vrsta zvočnikaNa prostem
Posebna funkcijaVgrajen mikrofon
Dimenzije izdelka12"D x 7"Š x 9"V
Teža predmeta4 funta
Stopnja vodoodpornostiVodotesen
Nadzorna metodaaplikacija
Velikost zvočnika12 palcev
Vir napajanjaŽično električno napajanje (prek PoE)
Največja izhodna moč zvočnika100 vatov
Frekvenčni odziv20 Hz (najmanj)
Tehnologija povezljivostiEthernet
Način avdio izhodaMono
Združljive napraveLaptop, Smartphone, Tablet, Television (for control/integration)

9. Garancija in podpora

Garancija: The AXIS C1310-E Mk II Network Horn Speaker comes with a Limited Warranty. Please refer to the official Axis Communications website or your purchase documentation for specific terms and conditions regarding warranty coverage and duration.

Tehnična podpora: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Axis Communications support directly. Visit the official Axis Communications website for contact information, support resources, and frequently asked questions.