Uporabniški priročnik za BITMAIN Antminer S19j XP 151TH/S Bitcoin ASIC rudar

1. Uvod

This manual provides essential instructions for the safe and efficient operation of your BITMAIN Antminer S19j XP 151TH/S Bitcoin ASIC Miner. Please read this document thoroughly before setting up or operating the device to ensure proper functionality and to prevent potential damage or injury. This miner is designed for SHA256-based cryptocurrency mining, including Bitcoin (BTC), Bitcoin Cash (BCH), and Bitcoin SV (BSV).

2. Varnostne informacije

• voltage Zahteva: This device requires a 220-277V power supply. Connecting to an incorrect voltage (e.g., 110V) will likely cause severe damage to the miner and void the warranty.
• Napajalni kabel: The power cord is NOT included in the package. Ensure you use a compatible power cord rated for the required voltage in tok.
• Prezračevanje: Operate the miner in a well-ventilated area to prevent overheating. Ensure adequate airflow around the device.
• Električna varnost: Do not operate the miner in damp or wet conditions. Avoid touching internal components while the device is powered on.
• Profesionalna namestitev: Če niste prepričani glede električnih priključkov, se posvetujte z usposobljenim električarjem.

3. Vsebina paketa

Upon unpacking, verify that all components are present and undamaged. The standard package for the Antminer S19j XP typically includes:

• BITMAIN Antminer S19j XP 151TH/S ASIC Miner unit
• Documentation (this user manual, quick start guide)

Note: A power cord is NOT included and must be purchased separately. Ensure it is rated for 220-277V operation.

4. Izdelek je končanview

The Antminer S19j XP is a high-performance ASIC miner designed for SHA256 algorithm cryptocurrencies. It features an integrated power supply and an air-cooling system.

Slika 4.1: Spredaj desno view of the Antminer S19j XP, showcasing its compact design and cooling fans.

Slika 4.2: Pod kotom view of the Antminer S19j XP, highlighting the critical 220V AC power requirement with a warning label.

Slika 4.3: Zadaj view of the Antminer S19j XP, displaying the Ethernet port, indicator lights, and power input sockets, along with the exhaust fans.

Figure 4.4: Top-left perspective of the Antminer S19j XP, showing the overall chassis and cooling fan arrangement.

5. Nastavitev

1. Umestitev: Choose a location with stable temperature (ideally 25°C / 77°F or lower) and excellent ventilation. Ensure there is at least 20 cm of clear space around all sides of the miner for optimal airflow.
2. Napajalni priključek: Connect a 220-277V power cord (not included) to the power input sockets on the miner. Ensure the power source is capable of providing 3247W.
3. Omrežna povezava: Connect an Ethernet cable to the RJ45 port on the control board. Ensure your network provides a stable internet connection.
4. Začetni vklop: Once power and network cables are securely connected, switch on the power supply. The miner will begin its boot sequence.

6. Navodila za uporabo

1. Dostop do Web Vmesnik: After the miner boots up, use an IP scanner tool on your network to find the miner's IP address. Open a web browser and enter the IP address to access the miner's web vmesnik.
2. Prijava: Enter the default username and password (refer to the quick start guide or manufacturer's website for default credentials).
3. Configure Mining Pool: Navigate to the 'Miner Configuration' or 'Settings' section. Enter the details for your chosen SHA256 mining pool (URL, Worker Name, Password). It is recommended to configure at least two backup pools.
4. Shrani in uporabi: Save your settings. The miner will restart or apply the new configuration and begin mining.
5. Spremljanje: Uporabite web interface to monitor the miner's status, hashrate, temperature, and fan speed.

7. Vzdrževanje

• Odstranjevanje prahu: Regularly inspect and clean the miner's fans and heatsinks to prevent dust buildup, which can impede cooling and reduce performance. Use compressed air or a soft brush. Ensure the miner is powered off and unplugged before cleaning.
• Okoljski nadzor: Maintain a stable operating environment within the recommended temperature and humidity ranges to prolong the miner's lifespan.
• Posodobitve vdelane programske opreme: Periodically check the official BITMAIN website for firmware updates. Applying updates can improve performance, stability, and security. Follow the manufacturer's instructions carefully during firmware upgrades.

8. Odpravljanje težav

• Rudar se ne vklopi: Verify the power cord is securely connected and the power source is providing 220-277V. Check circuit breakers.
• Ni omrežne povezave: Ensure the Ethernet cable is properly connected to both the miner and the router/switch. Check network settings and router status.
• Nizka hitrost hashrate-a: This could indicate overheating, an unstable network connection, or incorrect pool configuration. Check temperatures via the web interface and verify pool settings.
• Indikatorske lučke: Refer to the quick start guide for the meaning of specific LED indicator lights (e.g., 'Fault', 'Normal', 'IP Signal') to diagnose issues.
• Pregrevanje: Ensure adequate ventilation. Clean fans and heatsinks. Reduce ambient temperature if possible.

9. Specifikacije

10. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the official BITMAIN website or contact your authorized reseller. Keep your purchase receipt as proof of purchase. Any unauthorized modification or improper operation of the device may void the warranty.