WE Radio-Controlled Digital Alarm Clock User Manual

1. Uvod

This manual provides detailed instructions for the WE Radio-Controlled Digital Alarm Clock, Model WEREVDCFBL. This device offers precise timekeeping through radio signal synchronization, along with date and indoor temperature display, and a convenient backlight for enhanced visibility. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.

2. Izdelek je končanview

Familiarize yourself with the components and controls of your alarm clock.

Slika 2.1: Spredaj view of the WE Radio-Controlled Digital Alarm Clock. The display shows the current time, date, day of the week, and temperature.

Slika 2.2: Zadaj view of the alarm clock, highlighting the control buttons and the battery compartment. The buttons are used for setting time, alarm, and activating snooze/backlight.

Ključne značilnosti:

• Radio-controlled time synchronization for automatic and accurate time setting.
• Large, backlit digital display for clear visibility.
• Displays time (AM/PM or 24-hour format).
• Displays date (day, month, day of week).
• Displays indoor temperature (Celsius or Fahrenheit).
• Alarm function with snooze.
• Battery-operated for portability and power outage resilience.

3. Nastavitev

3.1 Namestitev baterije

1. Poiščite predal za baterije na zadnji strani enote (glejte sliko 2.2).
2. Odprite pokrov prostora za baterije.
3. Insert the required batteries (e.g., 2x AA, not included) according to the polarity markings (+/-) inside the compartment.
4. Trdno zaprite pokrov prostora za baterije.

3.2 Začetni vklop

Upon battery insertion, the clock will power on and typically begin searching for the radio control signal. Place the clock near a window for optimal signal reception.

3.3 Radio-Controlled Time Synchronization

The clock will automatically attempt to synchronize with the radio signal (e.g., DCF). This process may take several minutes or up to 24 hours, depending on signal strength and your geographical location. A signal icon will appear on the display when synchronization is successful. If synchronization fails, the time can be set manually.

4. Navodila za uporabo

4.1 Funkcije gumbov

• NAVODILA: Cycle through display modes (e.g., Time, Alarm setting).
• ALARM: Activate/deactivate alarm, enter alarm setting mode.
• UP: Increase values, change settings.
• DOL: Decrease values, change settings.
• SNZ/LGT: Activate snooze function when alarm sounds, activate backlight for a few seconds.

4.2 Ročna nastavitev časa in datuma

If radio synchronization is not desired or unsuccessful:

1. Pritisnite in držite NAČIN gumb, dokler prikaz časa ne začne utripati.
2. Uporabite UP or DOL gumbe za nastavitev ure. Pritisnite NAČIN za potrditev in premik na minute.
3. Ponovite za minute, leto, mesec in dan.
4. Pritisnite NAČIN ponovno za izhod iz načina nastavitev.

4.3 Nastavitev alarma

1. Pritisnite ALARM enkrat gumb za view trenutni čas alarma.
2. Pritisnite in držite ALARM gumb, dokler ne začne utripati čas alarma.
3. Uporabite UP or DOL gumba za nastavitev želene ure budilke. Pritisnite ALARM za potrditev in premik na minute.
4. Uporabite UP or DOL gumba za nastavitev želene minute alarma. Pritisnite ALARM za potrditev in izhod iz načina nastavitve alarma.
5. Za vklop ali izklop alarma pritisnite ALARM button once. An alarm icon will appear on the display when the alarm is active.

4.4 Funkcija dremeža

Ko se oglasi alarm, pritisnite tipko SNZ/LGT button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (snooze duration is typically fixed and cannot be adjusted).

4.5 Delovanje osvetlitve ozadja

Pritisnite SNZ/LGT button to briefly illuminate the display backlight for improved visibility in low-light conditions.

4.6 Prikaz temperature

The current indoor temperature is continuously displayed on the screen. To switch between Celsius and Fahrenheit, refer to the specific instructions in your product packaging or look for a dedicated switch, often located in the battery compartment.

5. Vzdrževanje

5.1 Čiščenje

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.

5.2 Zamenjava baterije

Replace batteries when the display dims, the backlight becomes weak, or the clock stops functioning correctly. Ensure correct polarity when inserting new batteries.

6. Odpravljanje težav

• Brez zaslona ali zatemnjen zaslon:
  Check battery installation and charge. Replace batteries if necessary. Ensure batteries are inserted with correct polarity.
• Napačen čas:
  Ensure the clock is in a location with good radio signal reception, away from electronic interference. Allow up to 24 hours for automatic synchronization. If radio control is consistently unsuccessful, manually set the time as described in Section 4.2.
• Alarm se ne oglasi:
  Ensure the alarm is activated (check for the alarm icon on the display). Verify that the alarm time is set correctly.
• Temperature Reading Appears Incorrect:
  Ensure the clock is placed in a stable indoor environment, away from direct sunlight, drafts, or heat sources that could affect temperature readings.

7. Specifikacije

8. Garancija in podpora

Warranty information for the WE Radio-Controlled Digital Alarm Clock is typically provided at the point of purchase or can be found on the manufacturer's official website. For technical support or inquiries, please refer to the contact information provided by your retailer or the manufacturer.