Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Pomembne varnostne informacije

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite varovalko ali odklopnik.
• OPOZORILO: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Zagotovite dovodni voltage is compatible with the fixture's requirements (120V-277V).
• All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Ne poskušajte spreminjati ali razstavljati svetilke. V notranjosti ni delov, ki bi jih lahko uporabnik popravil.

2. Kaj je v škatli

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• LED Shop Light Fixture(s)
• Pritrdilni material (vijaki, sidra)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Žične matice

3. Specifikacije

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. Nastavitev in namestitev

Follow these steps for proper installation. Ensure power is disconnected before starting.

4.1. Pripravite se na namestitev

1. Izklopite napajanje: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Izberite barvno temperaturo (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Montaža napeljave

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Označite pritrdilne točke: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Namestitev montažne strojne opreme: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Priprava ožičenja: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Električna povezava

1. Povežite žice: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Zategnite žice: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Varne povezave: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Končni koraki

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Obnovi moč: Turn the circuit breaker back on to restore power to the fixture.

5. Navodila za uporabo

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Color Temperature Selection (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Vklop/izklop

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Vzdrževanje

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Čiščenje: Zunanjost svetilke obrišite z mehko, suho ali rahlo vlažno krpo.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• Pregled: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Brez zamenjave žarnice: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Odpravljanje težav

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Lučka se ne prižge:
  • Preverite odklopnik, da zagotovite, da je napajanje vključeno.
  • Preverite, ali so vse žične povezave varne in pravilne.
  • Prepričajte se, da je stensko stikalo v položaju VKLOP.
• Utripanje luči:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Preverite ohlapne povezave žic.
  • Zagotovite dovodni voltage je stabilen in znotraj določenega območja.
• Nepravilna barvna temperatura:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Garancija in podpora

Sunco Lighting stands behind the quality of its products.

• Garancija: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting webZa vse podrobnosti in pogoje garancije glejte spletno mesto ali dokumentacijo o nakupu.
• Podpora strankam: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.