1. Uvod
This manual provides detailed instructions for the safe and efficient use of your Blitzwolf BW-CML5 Monitor Light Bar. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Vsebina paketa
Please check the package contents upon opening to ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.
- Blitzwolf BW-CML5 Monitor Light Bar
- Brezžični daljinski upravljalnik
- USB napajalni kabel
- Uporabniški priročnik (ta dokument)
3. Varnostna navodila
Za zagotovitev varnega delovanja in preprečevanje poškodb upoštevajte naslednje varnostne ukrepe:
- Naprave ne izpostavljajte vodi ali prekomerni vlagi.
- Naprave ne postavljajte v bližino virov toplote ali na neposredno sončno svetlobo.
- Naprave ne poskušajte razstavljati ali popravljati sami. Vsa servisna dela prepustite usposobljenemu osebju.
- Use only the provided USB power cable or a certified equivalent.
- Hraniti izven dosega otrok.
- Ensure the light bar is securely attached to the monitor to prevent accidental falls.
4. Nastavitev in namestitev
Follow these steps to set up your monitor light bar:
- Pritrdite svetlobno palico: Gently place the light bar on top of your monitor. The adjustable clip mechanism should securely grip the top edge of the monitor. Ensure the light source faces downwards towards your desk.
- Priključite napajanje: Connect the USB power cable to the light bar's power input port. Plug the other end of the USB cable into a USB port on your computer or a compatible USB power adapter (5V/1A recommended).
- Postavite daljinski upravljalnik: Place the wireless remote control on your desk within easy reach. The remote operates wirelessly and does not require direct line of sight to the light bar.
Slika 1: The Blitzwolf BW-CML5 Monitor Light Bar attached to a monitor, with its wireless remote control placed on a desk. This image illustrates the typical setup of the product.
5. Navodila za uporabo
The Blitzwolf BW-CML5 is controlled via its wireless remote. Familiarize yourself with the remote's functions:
Slika 2: Bližnji posnetek view of the wireless remote control for the Blitzwolf BW-CML5 Monitor Light Bar, showing the central rotary knob and three "DIY" preset buttons.
- Vklop/izklop: Press the central rotary knob once to turn the light bar on or off.
- Prilagodi svetlost: Rotate the central knob clockwise to increase brightness and counter-clockwise to decrease brightness.
- Prilagodi barvno temperaturo: Press and hold the central knob for approximately 2 seconds. While holding, rotate the knob to cycle through different color temperature settings (e.g., warm white, neutral white, cool white). Release the knob to set the desired temperature.
- DIY Preset Buttons (DIY1, DIY2, DIY3): These buttons allow you to save and recall your preferred brightness and color temperature settings.
- Če želite shraniti prednastavitev: Adjust the light bar to your desired brightness and color temperature. Then, press and hold one of the DIY buttons (DIY1, DIY2, or DIY3) for approximately 3 seconds until the light blinks, indicating the setting has been saved.
- Če želite priklicati prednastavitev: Simply press the corresponding DIY button (DIY1, DIY2, or DIY3) once to activate the saved setting.
6. Vzdrževanje
Pravilno vzdrževanje zagotavlja dolgo življenjsko dobo vaše naprave:
- Čiščenje: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light bar and remote control. Do not use abrasive cleaners or solvents.
- Shranjevanje: Ko naprave dalj časa ne uporabljate, jo shranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
7. Odpravljanje težav
If you encounter issues with your Blitzwolf BW-CML5, please refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Svetlobna palica se ne vklopi. | No power, loose connection, remote battery low. | Check USB power cable connection. Ensure USB power source is active. Replace remote control batteries if applicable (check remote manual for battery type). |
| Daljinski upravljalnik se ne odziva. | Remote battery low, interference, not paired. | Replace remote control batteries. Move remote closer to the light bar. If issues persist, refer to the remote's specific pairing instructions (if any, usually automatic for these devices). |
| Luč nepričakovano utripa ali se zatemni. | Insufficient power supply, faulty cable. | Ensure the USB power source provides sufficient power (5V/1A recommended). Try a different USB port or power adapter. Replace the USB cable if necessary. |
If the problem persists after trying these solutions, please contact Blitzwolf customer support for further assistance.
8. Specifikacije
| Model | BW-CML5 |
| Znamka | BlitzWolf |
| Mere izdelka (D x Š x V) | 10 x 5 x 1.27 cm |
| Teža izdelka | 100 g |
| Vhodna voltage | 5 V (prek USB-ja) |
| barva | Črna |
9. Garancija in podpora
Blitzwolf products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Blitzwolf website. Please have your model number (BW-CML5) and purchase information ready when contacting support.
For further assistance, you may contact Blitzwolf customer service through their official channels.
