1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Bixolon SRP-330III thermal printer. This model features Serial, Ethernet, and USB connectivity, making it suitable for various point-of-sale and receipt printing applications.
1.1 Vsebina paketa
Po razpakiranju preverite, ali so prisotni vsi elementi:
- Bixolon SRP-330III Thermal Printer
- Uporabniški priročnik (ta dokument)
- Napajalni kabel
- Interface Cable (may vary based on specific model variant, e.g., USB, Serial, or Ethernet)
2. Varnostne informacije
Please read the following safety precautions carefully before using the printer to ensure safe and optimal performance.
- Tiskalnika ne izpostavljajte vodi ali vlagi.
- Use only the power adapter and cables supplied with the printer.
- Prepričajte se, da je tiskalnik postavljen na stabilno in ravno površino.
- Izogibajte se blokiranju prezračevalnih odprtin.
- Tiskalnika ne poskušajte razstavljati ali popravljati sami. Obrnite se na usposobljeno servisno osebje.
- Hraniti izven dosega otrok.
3. Nastavitev
3.1 Razpakiranje in namestitev
Carefully remove the printer from its packaging. Place the printer in a location with adequate ventilation and away from direct sunlight or heat sources.
Slika 1: Bixolon SRP-330III Thermal Printer. This image shows the black Bixolon SRP-330III thermal printer, viewed from the front-right angle. The printer features a sleek, compact design with a paper output slot at the front and control buttons on the right side of the top panel. The Bixolon logo is visible on the top cover, and an Energy Star label is on the lower left front.
3.2 Povezovalni kabli
Connect the necessary cables to the printer and your host system.
- Napajalni priključek: Napajalni kabel priključite na napajalna vrata tiskalnika in nato na ozemljeno električno vtičnico.
- Povezava vmesnika:
- USB: Priključite kabel USB iz vrat USB tiskalnika v prosta vrata USB na računalniku.
- Ethernet: Priključite ethernetni kabel iz vrat LAN tiskalnika v omrežni usmerjevalnik ali stikalo.
- Serijska številka: Connect a Serial cable from the printer's Serial port to the Serial port on your computer or POS system.
3.3 Vstavljanje termičnega papirja
The SRP-330III uses thermal paper rolls. Follow these steps to load a new roll:
- Open the printer cover by pushing the cover open lever (typically located on the top right side of the printer).
- Insert the new thermal paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll towards the front of the printer.
- Izvlecite majhno količino papirja mimo rezalnika.
- Pokrov tiskalnika trdno zaprite, dokler se ne zaskoči.
4. Navodila za uporabo
4.1 Vklop/izklop
To power on the printer, ensure the power cable is connected and press the power switch (usually located at the rear or side of the printer). To power off, press the power switch again.
4.2 Osnovno tiskanje
Once the printer is connected and drivers are installed on your host system, you can initiate print jobs from your application. The printer will automatically feed and cut the thermal paper.
4.3 Indikatorji stanja
The printer features LED indicators on its control panel to display its current status:
- LED za napajanje: Označuje, da je tiskalnik vklopljen.
- LED za napako: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open, cutter error).
- Paper Out LED: Indicates that the printer is out of paper or the paper roll is low.
Refer to the troubleshooting section for resolving common error indications.
5. Vzdrževanje
5.1 Čiščenje tiskalnika
Regular cleaning helps maintain printer performance and extends its lifespan.
- Tiskalna glava: Gently wipe the thermal print head with a soft, lint-free cloth dampočiščeno z izopropilnim alkoholom. Pred čiščenjem se prepričajte, da je tiskalnik izklopljen in ohlajen.
- Ploski valj: Clean the platen roller with a soft cloth dampz izopropilnim alkoholom.
- Zunanjost: Obrišite zunanjost casing with a soft, dry cloth. Do not use abrasive cleaners.
Perform cleaning periodically, especially if print quality degrades.
5.2 Zamenjava papirnega zvitka
When the paper out indicator illuminates or print quality diminishes due to the end of the roll, replace the paper roll as described in Section 3.3.
6. Odpravljanje težav
This section addresses common issues you might encounter with your Bixolon SRP-330III printer.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Tiskalnik se ne vklopi. | Napajalni kabel ni priključen; vtičnica je okvarjena. | Preverite priklop napajalnega kabla; poskusite z drugo vtičnico. |
| No printing occurs. | Paper out; printer cover open; interface cable loose; driver issue. | Load paper; close cover; check cable connections; reinstall printer drivers. |
| Zastoj papirja. | Nepravilno vstavljanje papirja; tujek. | Open cover, carefully remove jammed paper, reload correctly. |
| Slaba kakovost tiskanja. | Dirty print head; low quality paper; incorrect settings. | Clean print head; use recommended thermal paper; check printer settings. |
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Ime modela | SRP-330III |
| Tehnologija tiskanja | Termični linijski tisk |
| Tehnologija povezljivosti | Ethernet, USB, serijski |
| Največja ločljivost črno-belega tiska | 203 dpi |
| Največja hitrost črno-belega tiskanja | 30 ppm |
| Izhod tiskalnika | Enobarvno |
| Dimenzije izdelka | 7.87" G x 9.84" Š x 7.87" V (20 x 25 x 20 cm) |
| Teža predmeta | 5.46 funtov (2.48 kg) |
| Največja velikost medija | 8.5 x 14 inch (A4 Centimeters) |
| Največja kapaciteta vhodnih listov | 150 |
| Wattage | 50 vatov |
| Posebna funkcija | Pripravljen na omrežje |
| Vključene komponente | User manual, power cable, interface cable |
| Številka modela artikla | 8809794035135 |
8. Informacije o garanciji
The Bixolon SRP-330III thermal printer comes with a dvoletna garancija proizvajalca against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Bixolon webspletno mesto ali se obrnite na podporo strankam.
9. Podpora strankam
If you encounter issues not covered in this manual or require further assistance, please contact Bixolon customer support. Visit the official Bixolon webspletno mesto za kontaktne podatke, prenose gonilnikov in dodatne vire.
Bixolon Official Webspletno mesto: www.bixolon.com
