1. Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TP-ET 18 Li BL-Solo 18V Cordless Compact Router. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TP-ET 18 Li BL-Solo is a versatile cordless compact router designed for precision woodworking tasks such as edge milling, grooving, and decorative profiling. It features a powerful brushless motor for extended runtime and performance, electronic speed control, and a continuously adjustable milling depth.
2. Splošna varnostna navodila
OPOZORILO: Preberite vsa varnostna opozorila, navodila, ilustracije in specifikacije, ki so priložena temu električnemu orodju. Neupoštevanje vseh spodnjih navodil lahko povzroči električni udar, požar in/ali resne poškodbe.
2.1 Varnost na delovnem območju
- Delovno območje naj bo čisto in dobro osvetljeno. Nered ali temna področja vabijo k nesrečam.
- Električnega orodja ne uporabljajte v eksplozivnem okolju, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu. Električna orodja ustvarjajo iskre, ki lahko vnamejo prah ali hlape.
- Med uporabo električnega orodja naj se otroci in navzoče osebe ne približujejo. Motnje lahko povzročijo izgubo nadzora.
2.2 Električna varnost
- Vtiči električnega orodja se morajo ujemati z vtičnico. Nikoli na noben način ne spreminjajte vtiča.
- Izogibajte se telesnemu stiku z ozemljenimi površinami, kot so cevi, radiatorji, štedilniki in hladilniki. Če je vaše telo ozemljeno ali ozemljeno, obstaja povečana nevarnost električnega udara.
- Električnega orodja ne izpostavljajte dežju ali mokrim pogojem. Vdor vode v električno orodje poveča nevarnost električnega udara.
2.3 Osebna varnost
- Vedno nosite zaščito za oči. Uporabljajte zaščitna očala, zaščitna očala ali ščitnik za obraz.
- Pri daljši uporabi električnega orodja nosite zaščito za sluh.
- Pravilno se oblecite. Ne nosite ohlapnih oblačil ali nakita. Lase in oblačila ne približujte premikajočim se delom.
- Bodite pozorni, pazite, kaj počnete, in pri delu z električnim orodjem uporabljajte zdrav razum.
- Električnega orodja ne silite. Uporabite pravilno električno orodje za svojo aplikacijo.
- Pred kakršnimi koli nastavitvami, menjavo pribora ali shranjevanjem električnega orodja odklopite baterijo iz električnega orodja.
- Neuporabno električno orodje shranjujte izven dosega otrok in ne dovolite osebam, ki niso seznanjene z električnim orodjem ali temi navodili, da ga uporabljajo.
- Vzdržujte električna orodja in pripomočke. Preverite, ali so gibljivi deli napačno poravnani ali zataknjeni, ali so deli poškodovani ali kakršna koli druga stanja, ki bi lahko vplivala na delovanje električnega orodja.
3. Komponente in vsebina paketa
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router package includes the following items:
- Einhell TP-ET 18 Li BL-Solo Compact Router (Tool Only)
- 2 x Collets (6mm and 8mm)
- Edge Milling Attachment
- 2 x Spanner Wrenches
- Copy Sleeve
- Suction Adapter
- Vzporedni postanek
- Compass Tip
Note: Battery and charger are NOT included with this 'Solo' version and must be purchased separately as part of the Einhell Power X-Change system.
Figure 1: Einhell TP-ET 18 Li BL-Solo Cordless Compact Router with included accessories. This image displays the main router unit, two collets, two spanner wrenches, an edge milling attachment, a copy sleeve, a suction adapter, a parallel stop, and a compass tip.
4. Nastavitev
4.1 Namestitev baterije
- Prepričajte se, da je usmerjevalnik izklopljen.
- Align the battery pack with the battery port on the top of the router.
- Potisnite baterijski sklop v vrata, dokler se ne zaskoči.
- Za odstranitev pritisnite gumb za sprostitev na baterijskem paketu in ga izvlecite.
Figure 2: The Einhell TP-ET 18 Li BL-Solo router is supplied without a battery or charger, highlighting the need for separate purchase of Power X-Change batteries.
4.2 Namestitev rezkalnega nastavka
- Zaradi varnosti se prepričajte, da je baterija odstranjena.
- Pritisnite in držite gumb za zaklepanje vretena, da preprečite vrtenje vretena.
- Loosen the collet nut using one of the provided spanner wrenches.
- Insert the desired router bit into the collet, ensuring it is seated firmly but not bottomed out.
- Tighten the collet nut securely with the spanner wrench while holding the spindle lock.
Slika 3: Bližnji posnetek view of the spindle lock button and collet area, essential for safe and easy router bit changes.
4.3 Attaching the Base Plate and Dust Extraction
- The transparent base plate is pre-installed. Ensure it is clean and free of debris.
- To attach the dust extraction adapter, align it with the designated port on the base plate and secure it. This allows connection to an external vacuum cleaner for a cleaner work environment.
Figure 4: The transparent base plate provides visibility of the workpiece during operation. The dust extraction port is visible for connecting a vacuum.
4.4 Adjusting Milling Depth
- Popustite ročico za nastavitev globine.
- Rotate the fine adjustment knob to set the desired milling depth. The scale on the side indicates the depth in millimeters.
- Once the desired depth is set, tighten the depth adjustment lever to secure the router in position.
4.5 Attaching Guides (Parallel Stop, Compass Tip, Guide Roller)
Depending on your application, various guides can be attached to the router base for enhanced precision:
- Vzporedna zaustavitev: Used for routing parallel to an edge. Slide the parallel stop into the slots on the router base and secure it at the desired distance from the bit.
- Compass Tip: For cutting perfect circles. Attach the compass tip to the base and pivot it around a central point.
- Guide Roller: For following curved edges or templates. Attach the guide roller to the base, ensuring it makes contact with the guide surface.
5. Navodila za uporabo
5.1 Vklop/izklop
- To turn the router ON, slide the power switch to the 'I' position.
- To turn the router OFF, slide the power switch to the 'O' position.
5.2 Nadzor hitrosti
The router features electronic infinitely variable speed control. Adjust the speed dial to match the material and router bit being used. Higher speeds are generally suitable for smaller bits and softer materials, while lower speeds are for larger bits and harder materials.
Figure 5: The speed control dial allows for precise adjustment of the router's RPM to suit different materials and applications.
5.3 Tehnike usmerjanja
- Vedno se prepričajte, da je obdelovanec varno pritrjenamppred usmerjanjem.
- Rezkar zaženite, preden se dotaknete obdelovanca.
- Move the router smoothly and consistently along the desired path. Avoid sudden movements or excessive pressure.
- For best results and to prevent kickback, always feed the router against the direction of bit rotation.
- When routing edges, use the edge milling attachment for precise chamfering.
5.4 Zbiranje prahu
For a cleaner work environment and improved visibility, connect a suitable wet/dry vacuum cleaner to the suction adapter. This helps to remove wood chips and dust during operation.
6. Vzdrževanje
6.1 Čiščenje
- Pred čiščenjem vedno odklopite baterijo.
- Regularly clean the router housing, base plate, and collet area to remove dust and debris. Use a soft brush or compressed air.
- Ne uporabljajte agresivnih čistilnih sredstev ali topil.
6.2 Nega rezkalnega nastavka
- Keep router bits sharp and clean. Dull bits can cause overheating and poor cutting performance.
- Store bits in a protective case to prevent damage.
6.3 Splošni pregled
- Check all screws and fasteners regularly to ensure they are tight.
- Inspect the power cord (if applicable, for charger) for damage.
- Ensure all ventilation openings are clear to prevent overheating.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Usmerjevalnik se ne zažene | Baterija ni pravilno vstavljena ali je prazna. | Check battery connection; charge or replace battery. |
| Poor cutting quality / Rough edges | Dull or damaged router bit. Incorrect speed setting. | Replace bit; adjust speed according to material. |
| Prekomerne vibracije | Router bit not properly secured. Damaged bit. | Re-tighten collet nut; replace damaged bit. |
| Motor se pregreje | Zamašene prezračevalne reže. Preobremenitev orodja. | Clean ventilation slots; reduce cutting depth/feed rate. |
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Model | TP-ET 18 Li BL-Solo |
| Številka dela | 4350415 |
| voltage | 18 Volts (Power X-Change) |
| Vrsta motorja | Brez krtačk |
| Višina dviga | 40 mm |
| Velikosti klešče | 6 mm, 8 mm |
| Največja vrtilna hitrost | 3000 RPM (Note: Product description states 3000 RPM, title states 30000 RPM. Please verify with manufacturer for accurate specification.) |
| Dimenzije izdelka | 9.3 x 9.3 x 18.2 cm |
| Teža predmeta | 1.34 kg |
| Material | Aluminij, plastika |
| Vir napajanja | Napajanje z baterijo (Li-ion) |
Figure 6: The Einhell TP-ET 18 Li BL-Solo is part of the Power X-Change family, allowing battery compatibility across a wide range of Einhell tools.
Figure 7: Illustration highlighting the benefits of the PurePOWER brushless motor, including increased lifespan, runtime, and power compared to conventional motors.
9. Garancija in podpora
Your Einhell TP-ET 18 Li BL-Solo Cordless Compact Router comes with a 2-year warranty, ensuring safety and durability for your DIY projects. For warranty claims, technical support, or to explore other Einhell products, please visit the official Einhell store or contact customer service.
Uradna trgovina blagovne znamke: Einhell Canada Store
10. Videoposnetki izdelkov
No official product videos from the seller directly related to the Einhell TP-ET 18 Li BL-Solo Cordless Compact Router were found in the provided data. Videos available were either for related products from other brands, from influencers, or for different Einhell tools.
