1. Izdelek je končanview
This manual provides essential information for the EasyKeys Strattec X0033 Toolbox Replacement Key. This custom-cut key is designed to replace lost or damaged keys for various toolbox and truck topper locks, specifically those using the Strattec Key Series X0000 - X1131 with the code X0033.
The key is made from durable brass and is engineered for a precise fit, ensuring reliable operation with compatible lock systems.
2. Identifying Your Lock Code
Before ordering or using your replacement key, it is crucial to verify your lock code. The lock code is typically found in one of the following locations:
Opis slike: This diagram illustrates common locations where you can find your lock code. These include directly on the key (e.g., "FR322"), on the face of the lock cylinder (e.g., "FR322"), on a label positioned inside or behind the lock mechanism (e.g., "CODE: G38"), or on a label affixed to the cabinet or door itself (e.g., "HF321").
- On the Key: The code may be stamped directly onto your existing key.
- On the Lock Face: The code can often be found engraved or printed on the visible part of the lock cylinder.
- On a Label Inside/Behind the Lock: For some locks, the code is on a sticker or label located within the lock housing or on the surface it's mounted to.
- On the Cabinet/Door Label: The code might be present on a label attached to the toolbox or truck topper itself.
⚠ Pomembne opombe:
- Order by Manufacturer: Lock codes are specific to the manufacturer. Ensure the manufacturer of your lock matches the key's compatibility.
- Key Cuts Differ: Even if lock codes appear similar, the actual key cuts can vary significantly between different brands. Always confirm compatibility.
3. Združljivost
This Strattec X0033 replacement key is compatible with locks from the following manufacturers:
- Knapheide
- Leer
- SnugTop
- A.R.E.
- Adrian
- Holden (Instacode / Codes Online - Codemax - Red Tip Stop)
Ensure your lock's manufacturer and code (X0033) match for proper function.
4. Uporaba tipk
To use your replacement key:
- Insert the key fully into the lock cylinder.
- Turn the key to the required position to lock or unlock the mechanism.
- Remove the key after use.
If the key does not turn smoothly, do not force it. Refer to the troubleshooting section.
5. Specifikacije izdelka
| Funkcija | Podrobnost |
|---|---|
| Znamka | EasyKeys |
| Ime modela | X0033 |
| Proizvajalec | Strattec |
| Številka dela | X0033-strattec-key-914230 |
| Material | Medenina |
| Vrsta ključavnice | Cam |
| Mere predmeta (D x Š x V) | 0.5 x 0.5 x 1 palcev |
| Teža predmeta | 0.25 funta (4 unč) |
| Vključene komponente | Key (1 piece) |
| Posebne lastnosti | Custom Cut Key, Durable |
6. Odpravljanje težav
- Ključ se ne vstavi do konca:
Check for obstructions in the lock cylinder. Ensure the key is oriented correctly. If the issue persists, the key may not be the correct cut for the lock.
- Ključ se vstavi, vendar se ne obrne:
Verify that the lock code on your key matches the code on your lock. The key might be for a different lock code or manufacturer. Do not force the key, as this can damage the lock or the key.
- Lock Mechanism is Stiff:
Apply a small amount of graphite lubricant (not oil-based) into the lock cylinder. This can help free up internal mechanisms. If the lock remains stiff, the lock itself may require maintenance or replacement.
7. Garancija in podpora
This product is manufactured to high standards. For any questions regarding compatibility, usage, or if you encounter issues not covered in this manual, please contact EasyKeys customer support.
Za podrobnosti o garanciji in kontaktne podatke glejte dokumentacijo o nakupu.