TopTes TS-501B Sound Level Meter and TS-710 Light Meter Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.

2. Izdelek je končanview

The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.

2.1 TS-501B Sound Level Meter

The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.

Slika 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.

Slika 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.

Slika 3: Od blizu view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.

2.2 TS-710 Light Meter

The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.

Slika 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.

Slika 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.

Slika 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).

3. Varnostne informacije

Observe the following safety precautions to prevent injury and avoid damage to the devices:

• Do not attempt to open or modify the devices.
• Keep the devices away from water, high humidity, and extreme temperatures.
• Izogibajte se padcem ali izpostavljanju naprav močnim udarcem.
• Remove batteries if the devices will not be used for an extended period.
• Baterije zavrzite v skladu z lokalnimi predpisi.

4. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 1 x TopTes TS-710 Light Meter
• 1 x TopTes TS-501B Sound Level Meter
• 2 x Carrying Cases (one for each device)
• AAA Batteries (pre-installed or included separately)
• Uporabniški priročnik (ta dokument)

5. Nastavitev

5.1 Namestitev baterije

1. Locate the battery compartment on the back of each device.
2. Odprite pokrov baterije.
3. Vstavite baterije AAA in pazite na pravilno polarnost (+/-).
4. Varno zaprite pokrov baterije.

5.2 Vklop/izklop

Pritisnite Moč button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.

6. Navodila za uporabo

6.1 General Functions (Both Devices)

• MAX/MIN Recording: Pritisnite MAX/MIN button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
• Zadrževanje podatkov: Pritisnite PRIDRŽI button (or similar icon) to freeze the current reading on the display. Press again to release.
• Osvetlitev ozadja: Pritisnite Osvetlitev ozadja button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.

Slika 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.

6.2 TS-501B Sound Level Meter Operation

1. Vklopite napravo.
2. Select Weighting (A/C): Pritisnite klimatska naprava button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
3. Select Response Time (FAST/SLOW): Pritisnite F/S button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
4. Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.

6.3 TS-710 Light Meter Operation

1. Vklopite napravo.
2. Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
3. Select Unit (LUX/FC): Pritisnite ENOTA button to switch between Lux and Foot-Candle measurement units.
4. The device will display the light intensity, ambient temperature, and humidity.

7. Vzdrževanje

• Čiščenje: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
• Shranjevanje: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
• Zamenjava baterije: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.

8. Odpravljanje težav

9. Specifikacije

9.1 TS-501B Sound Level Meter

• Merilno območje: 30 do 130 dB
• Utež: klimatska naprava
• Mikrofon: 1/2 inch Electric Condenser Microphone
• Zaslon: 2.25-palčni osvetljeni LCD-zaslon
• Funkcije: MAX/MIN recording, Data Hold, Auto Power-Off

9.2 TS-710 Light Meter

• Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
• Senzor: 180° Rotating Sensor
• Dodatne meritve: Temperatura okolja, vlažnost
• Zaslon: 2.25-palčni osvetljeni LCD-zaslon
• Funkcije: MAX/MIN recording, Data Hold, Auto Power-Off

10. Garancija in podpora

TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.